Installation Instructions
Product Overview
This product is a modern office desk designed for minimal assembly. The main cabinet body is fully assembled and does not require individual installation. The primary tasks involve installing the partition and attaching the tabletop.
Description of Product Image: A contemporary office desk featuring a light wood-effect tabletop, a central white body, and two side cabinet units in a beige or light wood finish. The design is clean and rectangular.
Step 1: Install Partition Board
Required Accessories:
Angle iron [metal bracket] and Short screw [screw fastener]
Visual of Accessories: A group of small screws and one metal L-shaped angle bracket are shown.
Instruction: Install and fix the partition board from the inside of the table. Ensure it is installed in the correct direction, not the opposite.
Description of Installation Image: A person is shown kneeling and using a screwdriver to attach a wooden panel, identified as the partition board, to the interior of a desk cabinet.
Step 2: Attach Base Plate and Fix Desktop
Required Accessories:
Angle iron [metal bracket] and Short screw [screw fastener]
Instruction: First, attach the base plate. Next, install angle steel (angle iron) at the selected position to secure the desktop.
Description of Installation Images:
- A close-up view from underneath a desk surface shows an L-shaped angle bracket being attached to secure a panel.
- Another close-up shows an L-shaped angle bracket being attached to the edge of the desktop from below.
Step 3: Final Assembly
This product is shipped with the side cabinets fully assembled. No further installation is required for the main cabinet structure. Simply attach the divider panel (partition) and the desktop to complete the assembly.
Description of Final Product Images: Two views of the fully assembled office desk are displayed, showcasing its front and side profiles. The images highlight the integrated double cabinets and the main desktop surface.
