Oregon Scientific SL110 Stopwatch User Manual

Introduction

Thank you for selecting this Oregon Scientific™ Stopwatch. Please keep this manual for instructions and information you should know about.

Clock Overview

Front View (FIG. 1)

FIG. 1 shows the front of the stopwatch with the following labeled components:

• 1. SPLIT / RESET: Split / reset stopwatch; toggle setting options.
• 2. Day icon
• 3. AM / PM icon
• 4. MODE: Toggle between options.
• 5. START / STOP: Start / stop stopwatch; set values.
• 6. [Alarm ON indicator]: Indicates alarm is on.
• 7. Strap Keeper

Mode Sequence

Press MODE to navigate between modes:

• Clock Mode
• Stopwatch Mode
• Time / Date Setting Mode
• Alarm Mode

Clock Mode

To view the date, press START / STOP.

To Set Time and Date:

1. Navigate to time / date setting mode.
2. Press START / STOP to set the value. Press and hold to quickly scroll through the settings.
3. Press SPLIT / RESET to move to the next setting. The setting sequence is: set seconds to zero, minute, hour / 12 / 24 hour mode, date, month and weekday.
4. Press MODE to return to Clock mode.

NOTE: Press and hold START / STOP to scroll through hour settings and 12 / 24 hour formats.

To Toggle Alarm ON / OFF:

1. Press SPLIT / RESET to display alarm time in clock mode.
2. To toggle the alarm ON / OFF, press START / STOP while pressing and holding SPLIT / RESET. The [Alarm ON indicator] will show when activated.

To Silence Alarm:

• ➡️ Press START / STOP to silence it for 5 minutes.
• OR
• ➡️ Press SPLIT / RESET to turn the alarm off. It will re-activate after 24 hours.

Stopwatch Mode

To Operate Stopwatch:

1. Navigate to stopwatch mode.
2. Press START / STOP to start and stop timer.
3. Press SPLIT / RESET to reset timer when paused and to split time measurements while timer is still running.

Alarm Mode

To Set Alarm:

1. Navigate to Alarm Mode.
2. Press SPLIT / RESET to select between hour / minute.
3. Press START / STOP to scroll up and set the desired time. 'A' indicates am and 'P' indicates pm.
4. Press MODE to return to clock mode.

Precautions

⚠️ To ensure you use your product correctly and safely, read these warnings and the entire user manual before using the product:

• Use a soft, slightly moistened cloth. Do not use abrasive or corrosive cleaning agents, as these may cause damage. Never use the products in hot water or store them when wet.
• Do not subject the product to excessive force, shock, dust, temperature changes, or humidity. Never expose the product to direct sunlight for extended periods. Such treatment may result in malfunction.
• Do not tamper with the internal components. Doing so will terminate the product warranty and may cause damage. The main unit contains no user-serviceable parts.
• Do not scratch hard objects against the LCD display as this may cause damage.
• Take precautions when handling all battery types.
• Remove the batteries whenever you are planning to store the product for a long period of time.
• When replacing batteries, use new batteries as specified in this user manual.
• The product is a precision instrument. Never attempt to take this device apart. Contact the retailer or our customer service department if the product requires servicing.
• Do not touch the exposed electronic circuitry, as there is a danger of electric shock.
• Check all major functions if the device has not been used for a long time. Maintain regular internal testing and cleaning of your device. Have your watch serviced by an approved service center annually.
• When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.
• Due to printing limitations, the displays shown in this manual may differ from the actual display.
• The contents of this manual may not be reproduced without the permission of the manufacturer.

Notes

? The technical specifications for this product and the contents of the user manual are subject to change without notice.

? Features and accessories will not be available in all countries. For more information, please contact your local retailer.

Specifications

About Oregon Scientific

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products.

If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp

For international inquiries, please visit: www2.oregonscientific.com/about/international.asp

EU-Declaration of Conformity

Hereby, Oregon Scientific, declares that this Stopwatch (Model: SL110) is in compliance with EMC directive 2004/108/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

Marks: CE mark, Der Grüne Punkt symbol, RoHS compliant mark.