ComfortStar High Wall Heat Pump System
Submittal Data Sheet
Model Number: CPP3-36CD(I) (23V) / CPP3-36CD(O) (23H)
Indoor Unit Specifications
| Specification | Value |
|---|---|
| Indoor Noise Level (Turbo/H/M/L/Si) (dBA) | 871.1/676.9/447.3/329.6//57.0/51.0/45.0/33.5/27.5 |
| Indoor Air Flow (Turbo/H/M/L/Si) (CFM) | 49.57 x 11.14 x 14.25 |
| Dimension (W×D×H) (inch) | 1259.0×283.0×362.0 |
| Dimension (W×D×H) (mm) | 52.76 x 17.72 x 15.16 |
| Package (W×D×H) (inch) | 1340×450×385 |
| Package (W×D×H) (mm) | 43.43/56.88 |
| Net/Gross Weight (lbs) | 19.7/25.8 |
| Net/Gross Weight (kg) | ROTARY |
Outdoor Unit Specifications
| Specification | Value |
|---|---|
| Compressor Type | KTF250D22UMT |
| Compressor Model | R454B |
| Refrigerant | 670 |
| Refrigerant Oil Charge(mL) | VG74 |
| Refrigerant Oil | 2235.3 |
| Outdoor Air Flow (Max) (CFM) | 63.0 |
| Outdoor Noise Level (dBA) | 37.24 x 16.14 x 31.89 |
| Dimension (W×D×H) (inch) | 946.0×410.0×810.0 |
| Dimension (W×D×H) (mm) | 42.91 x 19.68 x 34.84 |
| Package (W×D×H) (inch) | 1090×500×885 |
| Package (W×D×H) (mm) | 150.35/160.27 |
| Net/Gross Weight (lbs) | 68.2/72.7 |
| Net/Gross Weight (kg) |
Efficiency
| Rating | Cooling | Heating |
|---|---|---|
| SEER2 | 19.5 | HSPF2-4 |
| EER2 | 9.3 | COP |
| 2.95 |
Performance of Cooling
| Parameter | Value (Btu/hr) |
|---|---|
| Rated Capacity | 36000 |
| Min/Max Capacity | 6600~36800 |
| Moisture Removal(L/h) | 5.1 |
| Standard Operating Range (°F/°C) | -13~122(-25~50) |
| Conditions: | Indoor: 80°F DB/67°F WB Outdoor: 95°F DB/75°F WB |
Performance of Heating
| Parameter | Value (Btu/hr) |
|---|---|
| 1. @ 47°F Rated | 36000 |
| 1. @ 47°F Min/Max Capacity | 11400~44000 |
| 2. @ 17°F Rated | 25600 |
| 3. @ 5°F Rated: Capacity / COP | 24000/2.02 |
| 3. @ 5°F Max: Capacity | 24000 |
| Standard Operating Range (°F/°C) | -13~75(-25~24) |
| Conditions: | Indoor: 70°F DB/60°F WB Outdoor: 47°F DB/43°F WB |
| 2. Conditions: | Indoor: 70°F DB/60°F WB Outdoor: 17°F DB/15°F WB |
| 3. Conditions | Indoor: 70°F DB/60°F WB Outdoor: 5°F DB/5°F WB |
Electrical
| Specification | Value |
|---|---|
| Power Supply | 208/230V,60Hz, 1Ph |
| System MCA | 33.0 |
| Connection Wiring | 14#x4 |
| Compressor RLA | 35 |
| Outdoor Fan Motor RLA | 21.5 |
| Outdoor Fan Motor W | 1.3 |
| Indoor Fan Motor RLA | 120 |
| Indoor Fan Motor W | 1.0 |
| System Power Input @ Cooling (W) | 58 |
| System Power Input @ Heating (W) | 3830(735~4400) |
| MCA: Min. circuit amps (A) | 3580(1015~4800) |
| RLA: Rated load amps (A) | |
| MOCP: Max. over current protection (A) | |
| W: Fan motor rated output (W) |
Piping
| Specification | Value |
|---|---|
| Throttle type(Indoor) | N/A |
| Throttle type(Outdoor) | EXV+Throttle valve |
| Liquid Size | 9.52mm(3/8in) |
| Gas Size | 15.9mm(5/8in) |
| Max. Piping Length(ft/m) | 213.20(65) |
| Max. Height Difference(ft/m) | 98.40(30) |
| Max. Pre-charged Length(ft/m) | 24.6(7.5) |
| Refrigerant Pre-charged Amount(oz/g) | 112.88(3.2) |
| Additional Charge of Refrigerant((oz/ft)/(g/m)) | 0.32(30) |
| Connection Method | Flared |
Indoor Unit Dimensions
The indoor unit has the following dimensions:
- Capacity: 6K-9K, Body Code: A, W(inch/mm): 28-3/4in/729mm, D(mm/inch): 7-7/8in/200mm, H(mm/inch): 11-1/2in/292mm
- Capacity: 9K-12K, Body Code: B, W(inch/mm): 31-5/8in/802mm, D(mm/inch): 7-7/8in/200mm, H(mm/inch): 11-5/8in/295mm
- Capacity: 18K, Body Code: C, W(inch/mm): 38-1/4in/971mm, D(mm/inch): 9in/228mm, H(mm/inch): 12-5/8in/321mm
- Capacity: 18K-24K, Body Code: D, W(inch/mm): 42-5/8in/1082mm, D(mm/inch): 9-1/4in/234mm, H(mm/inch): 13-1/4in/337mm
- Capacity: 30K-36K, Body Code: F, W(inch/mm): 49-5/8in/1259mm, D(mm/inch): 11-1/8in/283mm, H(mm/inch): 14-1/4in/362mm
Indoor unit dimensions (WxH): 49.57in(1259mm)×14.25in(362mm)
Installation Instructions
Indoor Unit Installation:
Select the installation location carefully. The piping can exit from the left-hand side, right-hand side, left rear, or right rear of the unit. Ensure adequate space around the unit for proper ventilation and maintenance.
Note: When the gas side connective pipe is 5/8in (16mm) or more, the wall hole should be 3-1/2in (90mm).
Outdoor Unit Installation:
Ensure the following clearances for the outdoor unit:
- 4in (100mm) or more on the sides and rear.
- 20in (500mm) or more in the front and sides if the unit is clear.
- 20in (500mm) or more on the sides of left, right, and rear if any 2 sides are clear.
- 14in (350mm) or more on the rear.
Note: Meets all spatial requirements shown in Installation Clearance Requirements above.
Features
- Indoor unit TU1 copper coil
- Humidity control
- 1~100% fan speed setting
- WiFi capability: through WiFi dongle or wired controller with built-in WiFi
- OTA (by using WiFi dongle)
Multiple control options available:
- Two way communication wired controller: AWC-8P-CPP*
- Two way communication wired controller with built-in WiFi: AWC-8P-LC-WIFI
- Infrared wired controller: AWC-4
- Wireless remote controller
- Third-Party 24V Thermostat
