JLab Studio ANC Headphones

FIRST-TIME SETUP: BLUETOOTH PAIRING

1. Turn on Bluetooth in your device's settings.

   Visual Description: An illustration of a smartphone's settings menu showing the Bluetooth option enabled.

2. If the Studio ANC Headphones are off, press and hold the Power button for approximately 8 seconds.

   Visual Description: An illustration of the headphones with the power button highlighted. The accompanying text explains that rapidly blinking red and blue lights indicate the headphones are searching for a Bluetooth device.

3. Select 'JLab Studio ANC' in your device's settings to connect.

   Visual Description: An illustration of a smartphone's settings menu showing 'JLab Studio ANC' selected. The text indicates that once paired, the headphones will emit two beeps and the blue light will blink slowly.

PAIRING NEW / EXTRA DEVICES

Turn Bluetooth OFF on your previously paired device and turn Bluetooth ON on the new device. Repeat the FIRST-TIME SETUP process for new devices.

Notes on Bluetooth

• Bluetooth is a wireless radio technology, meaning it is sensitive to objects between the headphones and the connected device. The headphones are designed for use within 33 feet (10 meters) of a connected device, without large objects in between (walls, etc.).
• Once successfully connected, the headphones will remember your device and automatically pair in the future when turned on. Only one device can be paired at a time. To pair with another device, you must first unpair the current device via Bluetooth settings.
• If the Bluetooth connection is interrupted for any reason, you can manually re-establish the connection with your Bluetooth device.

BUTTON FUNCTIONS

• Volume Up: Press once
• Next Track: Press and hold for over 2 seconds
• Volume Down: Press once
• Previous Track: Press and hold for over 2 seconds
• Power On/Off: Press and hold for over 2 seconds
• Play/Pause / Answer/End Call: Press once
• Reject Incoming Call: Press and hold for 1 second
• Activate Siri (iOS) or "OK Google" (Android): Double click
• Bluetooth Pairing: See FIRST-TIME SETUP

ACTIVE NOISE CANCELLATION (ANC)

• Connected via Bluetooth: Press once to toggle ON/OFF. ON: 2 beeps. OFF: 1 beep.
• Connected via AUX: Press and hold for over 2 seconds to toggle ON/OFF. ON: 2 beeps. OFF: 1 beep.

Visual Description: An indicator for activating ANC.

AUX INPUT

Insert the AUX INPUT CABLE into the headphones and connect to in-flight entertainment or play without battery power.

Visual Description: An illustration showing the AUX input cable being plugged into the headphones and an airplane's in-flight entertainment system or a device for playing audio without battery power.

CHARGING

Note: For optimal performance, charge overnight with a micro-USB cable before use. Full charge takes approximately 3 hours.

Connect the micro-USB (included) to the headphones and the USB to a computer or AC adapter (not included). Ensure the USB connection has a power output.

The light will be solid red while charging and blue when fully charged.

Note: Studio ANC can still be used while charging. Turn on and connect to the device while charging.

Visual Description: An illustration showing the micro-USB cable connected to the headphones and the USB end connected to a computer or power adapter. It also shows the indicator light status for charging (red) and fully charged (blue).

Notes on AUX Input

• The ANC function works when connected via AUX INPUT. Press and hold the ANC button for over 2 seconds to toggle ON/OFF.
• The AUX INPUT will override your Bluetooth device pairing. Removing it will revert to Bluetooth.
• Button functions for your Bluetooth device will not work when connected via AUX INPUT. Volume depends on your AUX device settings. Adjust accordingly.

WARNINGS

• Ensure no moisture or liquids are in the headphone earcup.
• Avoid extreme heat, cold, and moisture.
• Avoid dropping or pinching the headphones, straining the cable by pulling quickly or with extreme force, or bending the cable at a sharp angle.
• Earwax may accumulate in the headphones, reducing sound quality. Gently remove earwax with a cotton swab or other small object to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or temporarily stopping use.
• If you regularly experience discomfort while using this product, stop using it and consult a doctor.
• We recommend treating your headphones like a pair of fine sunglasses and storing them in a safe place when not in use.

Get the JLab App

Shop Products | Product Notifications | Play Your Headphones

JLab Audio + Burn-in Tool

Visual Description: Links to download the JLab Audio app from the App Store and Google Play, along with a link to the JLab Audio website.

Download on the App Store

GET IT ON Google play

INTL.JLABAUDIO.COM