Instruction Manual for JLAB models including: HBASTUDIOANCRBLK4, Audio Studio ANC On-Ear Wireless Headphones
When the headphones are paired, voice prompts. “You are connected” and blue light will flash slowly. Bluetooth. JLab Studio ANC. Settings.
STUDIO ANC. HEADPHONES. FIRST TIME SETUP: BLUETOOTH PAIRING. Notes: • Bluetooth is a wireless radio technology, which means it is sensitive to objects ...
We love that you are rocking JLab Audio! We take pride in our products and fully stand behind them. LIMIT ED TWO .S. BASE OMER SU YEAR YOUR WARRANTY All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage. CONTACT US Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact REGISTER TODAY jlabaudio.com/register product updates | how-to tips FAQs & more U PPORT D CUST STUDIO ANC HEADPHONES FIRST TIME SETUP: BLUETOOTH PAIRING 1 Turn on Bluetooth in your device settings. Settings When the Studio ANC 2 Headphones are powered off, press and hold the Power Button for approximately 8 seconds. Bluetooth Fast blinking red and blue light indicates searching for Bluetooth device. Select "JLab Studio ANC" in 3 your device settings to connect. Settings Bluetooth JLab Studio ANC When the headphones are paired, voice prompts "You are connected" and blue light will flash slowly. PAIRING NEW / ADDITIONAL DEVICES: Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device. Repeat FIRST TIME SETUP process for new devices. Notes: · Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device. The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.). · Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future. Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings. · If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device. BUTTON FUNCTIONS VOLUME UP: Press once TRACK FORWARD: Press & hold 2+ seconds VOLUME DOWN: Press once TRACK BACKWARD: Press & hold 2+ seconds POWER ON / OFF: Press & hold 2+ seconds PLAY / PAUSE / ANSWER / HANG UP CALLS: Press once. REJECT INCOMING CALL: Press & hold 1 second ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): Press twice BLUETOOTH PAIRING: See FIRST TIME SETUP ACTIVE NOISE CANCELING CONNECTED TO BLUETOOTH: Press once to Power ON/OFF. ON: 2 Beeps OFF: 1 Beep CONNECTED TO AUX: Press and hold 2+ seconds to power ON/OFF. ON: 2 Beeps OFF: 1 Beep ANC ON AUX INPUT AUX INPUT CABLE Plug into in-flight media entertainment or play without battery power CHARGING Note: For optimum performance, charge overnight with Micro USB cable prior to using. Allow about 3 hours to fully charge. Connect the Micro USB (included) to the headphone and connect the USB into a computer or AC adaptor (not included). Make sure the USB connection has a power output source. Solid red light indicates the headphone is charging. Solid blue light indicates charging is complete. Note: Studio ANC can still be used while charging. Power on and connect to device after charging occurs. CHARGING CABLE NOTE: · The ANC function can work when connected with AUX INPUT. Press and hold 2+ seconds the ANC button to Power ON/OFF. · The AUX IPUT will override your Bluetooth device connection. Unplug to revert back to Bluetooth. · The button functions for your Bluetooth device will not work when AUX INPUT is connected. · The volume will be dependent on your AUX device settings. Adjust accordingly. OR CHARGING FULLY CHARGED CAUTIONS · Avoid getting moisture or liquids on the headphone cups. · Avoid extreme heat, cold, and humidity. · Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle. · Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality. · If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily. · If you experience regular discomfort while using this product, discontinue use and consult your physician. · We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use. Shop products | Product alerts | Burn-in your headphones JLab Audio + Burn-in Tool JLABAUDIO.COMAdobe PDF library 15.00 Adobe Illustrator(R) 17.0