JLab Studio ANC Headphones

Your Warranty

All warranty claims are subject to approval by JLab Audio at its discretion. Keep your proof of purchase to ensure warranty coverage.

Contact Us: Contact us at support@jlabaudio.com or go to intl.jlabaudio.com/contact

Register Today: intl.jlabaudio.com/register

Product updates | Useful tips | Frequently asked questions and more

First-Time Setup: Bluetooth Pairing

1. Step 1: Enable Bluetooth

   Turn on Bluetooth in your device settings.

   [Diagram: Smartphone screen showing Bluetooth settings with the Bluetooth toggle switched ON.]

2. Step 2: Prepare Headphones

   Press and hold the power button for approximately 8 seconds when the Studio ANC headphones are turned off.

   Indicator: A fast blinking red and blue light indicates the headphones are searching for a Bluetooth device.

   [Diagram: Headphones with an arrow pointing to the power button, indicating to press and hold for 8 seconds. Visual indicator shows a light blinking red and blue rapidly.]

3. Step 3: Connect to Device

   Select «JLab Studio ANC» in your device settings to connect.

   [Diagram: Smartphone screen showing Bluetooth settings, with "JLab Studio ANC" listed as a device and selected.]

Pairing Confirmation: When the headphones are paired, you will hear 2 beeps as the light blinks slowly blue.

[Diagram: Visual indicator shows a light blinking blue slowly.]

Pair New / More Devices

Turn OFF Bluetooth on the previously paired device, and turn ON Bluetooth on the new device. Repeat the FIRST-TIME SETUP process for new devices.

Notes on Bluetooth Connectivity

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphones and the connected device.
• The headphones are designed for use within 10 meters (approx. 33 feet) of a connected device, without large objects in between (e.g., walls).
• After successful pairing, the headphones will remember the device and automatically connect to it when turned on in the future.
• Only one device can be connected at a time. To connect to another device, you must first unpair from the current device via Bluetooth settings.
• If the Bluetooth connection is lost for any reason, you must manually reconnect the Bluetooth device again.

Button Functions

• Volume Up: Click once
• Next Track: Click and hold for min. 2 seconds ⏭️
• Volume Down: Click once ➖
• Previous Track: Click and hold for min. 2 seconds ⏮️
• Power On/Off: Click and hold for min. 2 seconds ?
• Play/Pause/Answer/End Call: Click once ▶️ / ?
• Reject Incoming Call: Click and hold for 1 second ??
• Activate Siri (iOS) or «OK Google» (Android): Double click ?️
• Bluetooth Pairing: See FIRST-TIME SETUP

[Diagram: Headphones showing the location of various buttons with corresponding function labels.]

Active Noise Cancellation (ANC)

• Connected via Bluetooth: Press once to turn ON/OFF. ON: 2 beeps. OFF: 1 beep.
• Connected via AUX: Press and hold for min. 2 seconds to turn ON/OFF. ON: 2 beeps. OFF: 1 beep.

Indicator: ANC is active. ?

AUX Input

Plug into in-flight entertainment or play without battery.

[Diagram: An AUX cable connecting the headphones to an airplane seat's audio jack. Another visual shows the AUX cable being used to play audio without the headphones being powered on.]

Charging

Note: For optimal performance, charge with the micro-USB cable overnight before use. Charge for approximately 3 hours to fully charge.

Connect the micro-USB cable (included) to the headphones, and connect the USB to a computer or AC adapter (not included). Ensure the USB connection has a power output source.

Charging Indicator: A solid red light ? indicates the headphone is charging. A solid blue light ? indicates it is fully charged.

Note: Studio ANC can still be used while charging. Turn on and connect the device after charging.

[Diagram: Micro-USB cable connecting to the headphones and then to a power source (computer USB port or wall adapter). Indicators show a red light for charging and a blue light for fully charged.]

Notes on AUX Usage

• The ANC function works when connected to an AUX input. Press and hold the ANC button for min. 2 seconds to turn ON/OFF.
• The AUX input overrides the connection to the Bluetooth device. Unplug the AUX cable to return to Bluetooth.
• The button functions for the Bluetooth device do not work while the AUX input is connected.
• Volume depends on AUX device settings. Adjust accordingly.

Caution

• Avoid getting moisture and liquid in the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the headphones, pulling hard on or applying other extreme force to the cable, or bending the cable at a sharp angle.
• Wax can build up in the headphone cups, which can degrade sound quality. Gently remove wax with a q-tip or other small tool to improve sound quality.
• If you experience discomfort or pain, try turning down the volume or stop using the product for a period.
• If you experience persistent discomfort when using this product, stop using it and consult a doctor.
• We recommend treating the headphones the same way you treat expensive sunglasses, and storing them in a safe place when not in use.

Further Information

Buy products | Product alerts | Burn-in headphones

JLab Audio + Burn-in Tool

Download on the App Store ? | GET IT ON Google play ▶️

Visit: jlabaudio.com