Alesso Barber Chair
Model: YLG-8779-1
Brand: Buy Rite Salon & Spa Equipment
Contact: 1-800-477-6655 | buyritebeauty.com
List of Parts & Tools
- [Chair] (Quantity: 1)
- [Backrest & Headrest] (Quantity: 1)
- [Foot Peg] (Quantity: 1)
- [M8 x 16mm Screws] (Quantity: 2, Pre-Installed)
- [M10 x 20mm Screws] (Quantity: 4, Pre-Installed)
- [6mm Allen Wrench] (Quantity: 1)
Assembly Instructions
Step 1: Attach Foot Peg
Tools Required: [6mm Allen Wrench]
Parts Required: [Chair], [Foot Peg], [M8 x 16mm Screws] (x2)
- Remove the two M8 screws from the underside of the metal footrest and set them aside.
- Align the holes in the foot peg with the matching holes on the footrest.
- Reinsert the M8 screws and hand-tighten to hold the foot peg in place.
- Use the provided wrench to fully tighten the screws. Do not overtighten, as this may damage the threads or mounting surface.
Diagram description: Illustrates the process of attaching the foot peg to the chair's footrest using M8 screws. It shows the screws being removed, the foot peg aligned, and then secured with the screws.
Step 2: Attach Backrest
Tools Required: [6mm Allen Wrench]
Parts Required: [Chair], [Backrest & Headrest], [M10 x 20mm Screws] (x4)
- Remove the four M10 screws from the left and right sides of the backrest and set them aside.
- Align the backrest so that its mounting holes match the holes on the chair frame.
- Insert one screw through the top hole on each side of the frame and into the backrest. Repeat for the bottom holes. Do not fully tighten yet.
- After all four screws are in place, use the provided wrench to tighten them gradually. Start each screw evenly to maintain proper alignment. Do not overtighten, as this may damage the threads or the chair frame.
Diagram description: Details the attachment of the backrest to the chair frame. It shows the removal of M10 screws, alignment of the backrest, insertion of screws, and gradual tightening for proper alignment.
Product Care
- [Brush icon] Brush away excess hair.
- [Cleaning supplies icon] Clean surface with damp cloth or use simple soap & water solution.
- [Corrosive cleaner warning icon] Avoid using corrosive cleaning agents such as bleaches.
- [Upholstery warning icon] Do not remove upholstery for cleaning.
Product Information
- Enjoy your new chair!
- Remember to always keep the hydraulic base in the upright position and never stand solely on the footrest as it will tip.
- After assembly and before use, we suggest pumping the hydraulic to full height and back down several times to prime the hydraulic fluid. This will keep the pump smooth and responsive.
- Note that short quick pumping is more effective for adjustments than pressing the lever all the way down each time.
- If you have any questions or concerns, please contact Buy Rite's customer experience team at 912-335-4445.
