Buy Rite Gramercy All Purpose Chair

Parts List & Tools

• Hydraulic Base and Pump (x1)
• Chair Top (x1)
• Footrest (x1)
• M8x30mm screws (x4)
• 14mm wrench (x1)

Assembly Instructions

Step 1: Unpacking

Carefully remove the chair top and hydraulic base from their respective shipping cartons.

Step 2: Prepare Base

Pump the hydraulic to raise the shaft to the highest position, preparing to install the chair top on the hydraulic base.

Step 3: Attach Chair Top to Base

1. Align the notch in the seat bracket (bottom of the chair) with the pin on the metal shaft of the hydraulic base. Place the chair top onto the base, ensuring the pin and notch align for proper installation.
2. Sit carefully in the chair to ensure the metal shaft is fully secured into the seat bracket. Note: The pin will not slide fully into the top of the seat bracket.
3. If the chair top is not stable, repeat steps 1 and 2. Check that the screws securing the pump to the base plate are tightly fastened.

Step 4: Attach Footrest

1. Locate the two screws on each side of the bottom of the chair top. Using the provided 14mm wrench, remove these screws.
2. Align the holes on the footrest with the holes in the chair top. Insert one screw on each side to secure the footrest, then apply the remaining two screws on each side. Tighten all four screws.
3. Ensure all screws are tight and secure before use. Be careful not to overtighten.

Product Care

• Brush away excess hair.
• Clean the surface with a damp cloth or a simple soap and water solution.
• Avoid using corrosive cleaning agents such as bleaches.
• Do not remove upholstery for cleaning.

Product Information

1. Enjoy your new chair!
2. Always keep the hydraulic base in the upright position. Never stand solely on the footrest, as it may tip.
3. After assembly and before use, pump the hydraulic to its full height and back down several times to prime the hydraulic fluid. This will ensure the pump remains smooth and responsive.
4. Short, quick pumps are more effective for adjustments than pressing the lever all the way down each time.
5. For any questions or concerns, please contact the Buy Rite customer experience team at 912-335-4445.