What's in the Box
The following items are included:
- Robot
- Uniclean™™ Station (with Dust Bag Included)
- Side Brushes (Two Sets)
- Power Cord
- Additional High-Performance Filter
- Additional Rolling Mop
- Cleaning Tool
- Additional Dust Bag
- Hard Floor Cleaner
- Documents
Download the App
Scan the QR code to download the Eufy app. Available on the App Store and Google Play.
For tutorial videos, manuals, and more information, please download the app and go to Profile > Help & Feedback > Choose your device, or by scanning the QR code.
Using Your Robot
Remove Foam Packaging
Before use, remove any foam packaging, stickers, and the Additional Rolling Mop from the robot and Uniclean™™ Station.
Install Side Brushes
Ensure the brushes marked '1' (red) and '2' (gray) are correctly installed on the robot as indicated.
Connect to Power Supply
Connect the power cord to the Uniclean™™ Station and a wall outlet.
Place the Uniclean™™ Station
Position the Uniclean™™ Station on a hard, flat floor against a wall. Ensure there is at least 4.95 ft (1.5 m) of clear space in front and 1.65 ft (0.5 m) of clear space on the sides. Place the station in an area with a strong Wi-Fi signal.
Install Hard Floor Cleaner
Install the Hard Floor Cleaner. You will hear a 'click' when it is properly locked in place. Note: Only use floor cleaner specified by Eufy.
Add Clean Water
Remove the clean water tank from the Uniclean™™ Station, fill it with clean water up to the MAX line, and reinsert it. Do not add third-party disinfectants or cleaners.
Turn On
Open the magnetic cover on the robot and toggle the power switch to 'I' to turn it on. The robot will provide a voice prompt upon powering up.
Place the Robot
Attach the robot to the Uniclean™™ Station by aligning the charging contact pins. The robot will begin charging automatically. After cleaning is complete, the robot will return to the All-in-One Station.
Cleaning and Maintenance
For optimal performance, regularly clean and maintain the product according to the following instructions. The frequency of cleaning and replacement will depend on your usage habits.
- 1 Magnetic cover
- 2 Dirty Water Reservoir
- 3 Dust Bin
Maintenance Steps:
- Clean debris tray
- Empty dirty water tank
- Clean the dirty water reservoir
- Replace the rolling mop
- Clean the rolling brush
- Replace with new dust bag
- Clean or replace the high-performance filter
Connect the App
To access all features, control your robot via the Eufy app. Press and hold the reset button for 1 second to initiate Wi-Fi connection, then follow the in-app instructions. Only 2.4GHz Wi-Fi is supported.
Button Controls - Robot
- Press to return to the Uniclean™™ Station.
- Press to start / pause cleaning.
- Press to switch between Vacuum-Only and Vacuum and Mop modes. Press and hold for 3 seconds to activate the mop wash and dry function.
- Simultaneously press and hold for 3 seconds to enable or disable the child safety lock.
Cautions
- For the first-time use in a new environment, the robot will initiate 'mapping'. It is recommended to open all doors and remove floor obstacles during this process.
- It is recommended to use the Vacuum-Only mode 1 to 3 times before using the Vacuum and Mop mode.
- [Important Note] For your return and after-sales service rights, please keep the original inner and outer packaging and accessories intact after receiving the product. Original packaging is required for hassle-free returns. Thank you for your understanding.
Customer Service
Contact Eufy support via email at support@eufy.com or visit www.eufy.com.
Phone numbers:
- (US/CA) +1 (800) 994 3056
- (UK) +44 (0) 1604 936200
- (DE) +49 (0) 69 9579 7960
- (AU) +61 3 8331 4800
- (JP) 03 4455 7823
Warranty: 12-month limited warranty.
