Eufy Robot Vacuum Omni S1 Pro Quick Start Guide
Package Contents
- All-in-One Cleaning Station
- Main Unit
- Instruction Manual
- FAQ
- Replacement Rotating Mops (included)
- Side Brushes (2 per set x 2 sets)
- Power Cord
- Replacement High-Performance Filter
- Cleaning Tool
- Replacement Dust Bags
- Floor Cleaner
- Quick Start Guide and other documents
How to Use
1. Remove Seals and Cushioning Material
Before use, remove the seals and cushioning material from the main unit and the station.
2. Attach Side Brushes
Attach the side brushes correctly as shown in the illustration below: 1 (Red) and 2 (Gray). You will hear a "click" when the side brushes are attached correctly.
3. Attach Floor Cleaner
Attach the floor cleaner to the station following the steps in the illustration below. You will hear a "click" when it is attached correctly.
Note: Only use the floor cleaner specified by the company. Using other detergents may damage the product and void the warranty.
Note: When returning the product to the company for return or repair, please remove the floor cleaner from the station and pack it. Also, check if there is any cleaner remaining inside the station.
4. Install the Station
Place the station on a flat floor, along a wall. Remove any obstacles within 0.5m to the left and right, and 1.5m in front of the station. If obstacles cannot be removed from the surrounding area, ensure the main unit can return to the station.
Note: Install the station in a location with a stable network, such as near your Wi-Fi router.
Diagram showing required clearance: 0.5m on sides, 1.5m in front.
5. Connect to Power
Connect the station to the power outlet using the included power cord.
The LCD display will light up.
6. Add Tap Water
Remove the clean water tank from the station, fill it with tap water up to the MAX line, and then reattach it to the station.
Note: Do not add floor cleaner directly into the clean water tank. This may damage the product and void the warranty.
Note: When returning the product to the company for return or repair, please empty the clean water tank and the dirty water tank.
App Download
Scan the QR code below to download the app from the App Store (for iOS devices) or Google Play (for Android devices).
[QR Code for App Store]
[QR Code for Google Play]
[Link to Support Videos]
Button Operation
All-in-One Cleaning Station
- Press once: Return the main unit to the station
- Press and hold for 3 seconds: Start cleaning and drying of the rotating mop
- Press and hold simultaneously for 3 seconds: Child lock on/off
Main Unit
- Press once: Start/Pause cleaning
- Press once: Switch cleaning mode (Suction only / Suction and mopping)
- Press and hold for 1 second: Start Wi-Fi connection
- Press and hold for 5 seconds: Reset to factory settings
Power On
Open the magnetic cover of the main unit and turn the switch to "ON". You will hear a voice guide when the power is on.
Place the Main Unit on the Station
Align the charging contacts and place the main unit on the station.
Connect to the App
To use all features, it is recommended to operate the product using the app.
- Scan the QR code on the previous page or download the app from the App Store (for iOS devices) or Google Play (for Android devices).
- Press and hold the reset button for 1 second to start Wi-Fi connection, and complete the connection by following the app's instructions.
Maintenance
Perform regular maintenance on this product according to the following steps.
Note: The frequency of cleaning and parts replacement varies depending on product usage.
1. Clean the Filter
Remove the filter from the main unit's dirty water tank and wash it with water. Remove the filter tray from the station and wash it with water.
2. Empty and Clean the Dirty Water Tank
Empty the dirty water accumulated in the station's dirty water tank and wash the tank with water.
3. Clean or Replace Rotating Mops
Remove the rotating mops for cleaning or replace them as needed.
To remove the rotating mops, first remove the dirty water tank and press the red button.
4. Clean the Rotating Brush
Remove the rotating brush and use the cleaning tool to remove tangled dust and hair.
5. Clean the Dust Container and Filter
Remove the dust container and filter, wash them with water, and dry them thoroughly. Replace the filter regularly.
6. Replace the Station's Dust Bag
Replace the dust bag in the station.
Precautions
- Before first use, the product will map your entire home. During mapping, open all doors in your home and remove any objects or cords that may obstruct the main unit's movement.
- To enhance cleaning effectiveness, it is recommended to vacuum first before mopping.
- Except for cleaning parts during maintenance, do not pour water directly onto the main unit or the all-in-one cleaning station.
- If there are flammable materials such as cigarette butts, accumulated water, sticky substances, hard objects, or sharp objects on the floor, remove them to prevent damage to the main unit.
Customer Support
Contact Us
- Email: support@anker.com
- Phone: 03 44557823
You can find the detailed instruction manual via the QR code above.
[QR Code for Detailed Manual]
You can check frequently asked questions via the QR code above.
[QR Code for FAQ]
Warranty Information
Maximum 24-month warranty. For 18 months from the order date (Note), if the product you are using exhibits any issues that appear to be defects, after the company confirms such issues are defects, the company will provide a replacement with the same product, repair services, or other appropriate measures as determined by the company. The company will bear the shipping costs for such cases. Additionally, for members of the official Anker Japan website, the standard 18-month product warranty will be automatically extended to 24 months.
(Note: Excluding pre-orders. For pre-orders, the period will be calculated from the shipping date.)
However, if the company cannot provide the same product as a replacement or repair service due to stockouts, discontinuation of sales, or other company reasons, the company may replace it with an equivalent successor product or refund the product price through the system. Please be aware of this in advance.
Furthermore, defects caused by customer negligence are not covered by this warranty.
[Social Media Links: Facebook, Twitter, Instagram]
[Product Model Number: 51005004112 V4]
