NuMotion Infinity Swing

Safety Warnings

⚠️ WARNING: NOT INTENDED FOR SLEEP

• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place on a firm, flat sleep surface like a crib or bassinet.

⚠️ WARNING: FALL AND STRANGULATION HAZARD

Infants have suffered head injuries falling from swings and have strangled in straps.

• ALWAYS use restraints. Adjust to fit snugly.
• STOP using product when infant attempts to climb out (approx. 9 months) or reaches 25 lbs, whichever comes first.
• ALWAYS place swing on the floor. Never use on any elevated surface.

⚠️ SUFFOCATION HAZARDS

Young infants have limited head and neck control. If the seat is too upright, infant's head can drop forward and compress the airway, potentially leading to fatality.

• ALWAYS keep swing seat fully reclined until infant is at least 4 months old AND can hold up head without help.
• NEVER add soft bedding or padding.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Infants have suffocated: on pillows, comforters, extra padding; in gaps between a wrong-size mattress or extra padding and product sides.

⚠️ GENERAL WARNINGS

• NEVER leave baby unattended.
• NEVER lift or carry baby in the product.
• DO NOT place product near water or potential wet areas (bathtub, sink, laundry tubs, etc.).

IMPORTANT!

Adult assembly required. Read all instructions before assembly and use. Exercise care during unpacking and assembly. Examine product frequently for damaged, missing, or loose parts. DO NOT use if any parts are missing, damaged, or broken; contact customer service for replacements. NEVER substitute parts. NEVER carry the swing by the toy bar.

Parts List

Check the parts to ensure you have all components for this model before assembling the swing.

• Main Frame
• (2) Bottom tubes
• Connection Support
• Seat Support Frame
• Seat
• Toy Bar
• (4) Screws
• Remote Control
• Adapter with Cable
• Screwdriver

How to Use

TO ASSEMBLE BOTTOM TUBES

1. Insert two bottom tubes into the main frame as indicated by the arrows (Fig. 1a). Secure with the 4 screws using the included screwdriver (Fig. 1b). Ensure the base is stable and not wobbly (Fig. 1c).

TO ASSEMBLE CONNECTION SUPPORT

1. Press down on the connection support (Fig. 2a) until a "click" sound is heard (Fig. 2b), confirming proper installation. If no click is heard, press down harder.

TO ASSEMBLE SEAT SUPPORT FRAME

1. Press down on the seat support frame (Fig. 3a) until a "click" sound is heard and the button pops up (Fig. 3b), indicating proper installation. If no click is heard, press down harder until the button pops up.

TO ASSEMBLE SEAT

1. Place the assembled base on the ground (Fig. 4a). Gently insert the tubes into the corresponding slots on both sides (Fig. 4b), ensuring they are fully locked (Fig. 4c). Pay attention to the seat's orientation before installation.

TO ATTACH TOYS ON TOY BAR

1. To attach toys, wrap the toy strap around the toy bar hole and secure using the hook and loop fastener (Fig. 5).

TO ASSEMBLE TOY BAR

1. Insert the toy bar into the top of the seat (Fig. 6a). Note that the toy bar cannot be easily removed after assembly. Refer to Fig. 6b for the fully assembled toy bar.

Seat Belt Installation

Disassembly: Remove hook and loop from strap cover, press the round button in the buckle to release the belt, slide out the left and right upper buckles.

Assembly: Slide in the left and right upper buckles, insert them into the center buckle, and cover the buckle with the strap cover.

Power and Controls

Power Supply

It is recommended to use the supplied adapter (DC 5V, 2A). Plug the adapter into a household power supply (110-240V) and connect the other end to the Type-C dock on the right side of the main frame (Fig. 7). Recommended for indoor use, away from damp places.

Touch Panel Button Functions

The touch panel controls the swing's functions:

• Power: Press to activate or stop the device. Pressing while the swing is active will also stop music and timer functions.
• Timer: Use the (+) and (-) icons to set the swing duration (5, 10, 20, 30, 45 minutes). The icon flashes when pressed. Default time is 45 minutes.
• Swing Motion («O»): Press to activate. Use (+) and (-) icons to choose from five motion modes:
  • N shape: Simulates a parent holding a baby while walking.
  • U shape: Simulates a rocking motion.
  • M shape: Enhanced simulation of holding a baby while walking.
  • O shape: Simulates a curved trajectory of holding a baby in circles.
  • Infinite shape: Simulates the wave pattern of a baby's free movement in the womb.
• Swinging Speed: Use (+) and (-) icons to select speed from levels 0-4. The icon flashes when pressed.
• Music: Use (+) and (-) icons to choose melodies. Contains 10 songs and 3 white noises that loop until the timer ends. Repeats songs after power off; disconnecting power restarts from the first track.
• Volume: Use (+) and (-) icons to adjust volume from levels 0-5.

Remote Control Usage

⚠️ WARNING: This product contains a button or coin cell battery. ALWAYS KEEP new and used batteries OUT OF REACH OF CHILDREN.

• First-time use: Pull out the battery isolation film from the bottom of the remote and keep it safe. Reinsert it to conserve battery life if not in use.
• Battery Replacement: Press the bottom left tab on the back of the remote and slide the right slot to open.
• Operation Note: For correct remote operation, the panel should face upward, and the infrared lamp should face the main base. Effective distance is within 4 meters at a 35° angle. Remote function may not work if not used properly.

Seat Adjustment and Carrying

Seat Angle Adjustment

1. Lift the lever on the connection hub (Fig. 8) and slide the tube up or down manually. The highest position angle is 28°, and the lowest is 15°. Do not adjust the seat angle while the baby is seated.

Seat Rotation

1. Hold the seat with both hands (Fig. 9a) to rotate 90 degrees left or right only (Fig. 9b). The seat cannot be rotated 360 degrees.

Product Disassembly

1. To remove the seat, press the button (Fig. 10a) and then lift the seat (Fig. 10b).

Carrying the Swing

1. To carry the swing properly, face the front and lift from the metal support tubes, using one hand on each tube.

Attention and Care

Attention Points

• Music can be activated independently by pressing the music icon after plugging in the power.
• The motor has a protection mechanism: If the swing is blocked by an object, it will automatically stop all functions. Turn off and restart the swing to resume normal operation.
• Safety Belt Usage: First, unfasten the safety belt and position it correctly. Place the baby in the swing. Buckle the seat belt and waist belt together. Ensure belts are buckled correctly for baby's safety.
• Correct Carrying Method: Hold the main electronic part or lift the bottom tubes with both hands.

Care and Maintenance

Seat Pad

Do not wash. Clean using only mild household soap or detergent and warm water on a clean sponge or cloth. Do not bleach, iron, or dry clean.

Toy Bar and Toys

Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.

Frame

Wipe the metal frame with a soft, clean cloth and mild soap. Disconnect the power supply before cleaning the base. Do not immerse the base in water.

Battery Warning

⚠️ INGESTION HAZARD: This product contains a button cell or coin battery.

• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH OF CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Battery Handling:

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Non-rechargeable batteries are not to be recharged.
• Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
• Compatible battery type: CR2025, nominal voltage 3V.
• Do not force discharge, recharge, disassemble, heat above 50°C (122°F), or incinerate. Doing so may result in injury due to venting, leakage, or explosion.
• Ensure batteries are installed correctly according to polarity (+ and -).
• Remove and recycle/dispose of batteries from equipment not used for an extended period according to local regulations.
• Always completely secure the battery compartment. If it does not close securely, stop using the product, remove batteries, and keep them away from children.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Customer Service

The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.