Getting Started
Welcome to the user manual for the Mi Computer Monitor Light Bar.
Package Contents
- Mi Computer Monitor Light Bar
- Type-C Charging Cable
- Remote Control
- Mounting Bracket
Note: AAA batteries x2 are not included and are sold separately. Illustrations of the product, accessories, and user interface in this manual are for reference purposes only. The actual product and functions may vary depending on product improvements.
Setup
1. Attach the Light Bar
With the light facing downwards, connect the power contact points on the light bar to those on the base. Place the base on the top center of the monitor and ensure the clip is securely attached to the monitor and the bottom of the base rests against the back of the monitor.
Compatibility Notes: This product is compatible with monitors with a thickness of no more than 32 mm, as well as curved monitors and iMacs. Monitors with a thickness less than 10 mm may be supported by the light bar, but the bottom of the base may not rest against the monitor. The gravity shaft on the base is adjustable up to 40°. Do not pull too hard. This product cannot be used with laptops.
2. Insert Batteries into the Remote Control
- Place the remote control, non-slip pad facing down, in your palm. Hold the remote control with your other hand and turn it counter-clockwise to open the back cover.
- Insert two AAA batteries (sold separately). Ensure the positive (+) and negative (-) terminals are facing the correct direction.
- Attach the back cover and align the triangle at the bottom with the lock symbol on the non-slip pad.
- Place the remote control, non-slip pad facing down, in your palm. Hold the remote control with your other hand and turn it clockwise to re-secure the back cover.
How to Use
1. Connect to a Power Source
Connect the charging cable to the power port on the light bar and then plug it into a power source.
Power Source Requirements: This product can be powered by an adapter, power bank, or computer's USB port with an output voltage of 5 V and an output current greater than 1 A. Power sources must be Safety Extra Low Voltage (SELV) and not exceed a peak voltage of 5.25 V. Please use the original charging cable. Do not use a USB extension cable or splitter, as this may cause the light bar to malfunction. Do not use a fast charging cable that does not provide 5 V by default. If the light bar flickers or makes noise, please replace the power source devices immediately. Do not connect the power contact points on the light bar or base to any other metallic conductor, as this may damage the product or cause other hazards. The original charging cable is designed exclusively for the Mi Computer Monitor Light Bar. Fast charging or data transmission is not supported with this charging cable.
2. Control the Light
Press the button on the remote control to turn the light on/off. After turning on the light, rotate the button on the remote control to adjust the brightness. Press and hold the button, then rotate simultaneously to adjust the color temperature. For optimal computer use, a color temperature of 2700 K and brightness up to 50% is recommended (achieved by pressing and holding the button for two seconds).
Pairing Note: The remote control and light bar are paired by default when leaving the factory; you can use the remote control directly upon receipt. If you need to pair your light bar with a non-original accessory of the same model, press and hold the button on the remote control within 20 seconds after turning on the light. When the light slowly flashes, it has been successfully paired with the accessory.
3. Adjust the Angle
Rotate the light bar as shown in the illustration to adjust the angle. It has an adjustment range of 25°.
Technical Specifications
- Model: MJGJD01YL
- Working Temperature: -10 ° C to 40 ° C
- Working Humidity: %0 RH
- Service Life: 25 hours
- Power Factor: > 0.9
- Rated Power: 5 W (80 x 0.2 W / LED module)
- Light Bar Dimensions: Ø 23 x 448 mm
- Remote Control Dimensions: Ø 66.5 x 34 mm
- Color Temperature: 2700 K
- Color Rendering Index: Ra95
- Luminous Flux: 270 lm
- Nominal Input: 5 V 1 A
- Wireless Connection: 2.4 GHz
- Operating Frequency: 2405-2480 MHz
- Maximum Output Power: 7.94 dBm
Energy Consumption
- Turn off data connections such as Bluetooth and wireless networks when not in use.
- Reduce screen brightness and set the screen to turn off after a shorter period.
- Turn off button sounds and other unnecessary sounds.
Safety Information
- One remote control can control multiple light bars, but one light bar can only be controlled by one remote control.
- When cleaning the surface of the light bar, wipe it with a soft cotton cloth. Never use abrasive solvents.
- When attaching or moving the light bar, please hold both the light bar and the base to prevent damage to the product or personal injury from falling parts.
- When inserting batteries into the remote control, ensure the positive (+) and negative (-) terminals are inserted correctly.
- Discharged non-rechargeable batteries cannot be recharged. Different types of batteries, as well as old and new batteries, should not be mixed.
- If the remote control does not function properly after a normal period of use, the battery level may be low. Please replace the batteries with new ones and dispose of old batteries in accordance with local regulations and ordinances to prevent environmental pollution.
- Please recycle old batteries to prevent environmental pollution. Batteries should be removed from the remote control when it is not used for a long time or is discarded.
- Remove leaking batteries from the remote control and dispose of them in accordance with local rules and regulations to prevent environmental pollution.
- The light source in this fixture should only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- This product is designed for indoor use only.
- Under normal operating conditions, a distance of at least 20 cm should be maintained between this equipment and the user's body.
- When attaching the light bar to the base, ensure the power contact points on the light bar and base are aligned correctly.
Manufacturer Information
Manufactured for: Xiaomi Communications Co., Ltd.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem company)
Address: 10F-B4, Building B, Qingdao International Innovation Park, No. 1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, PR China
For more information, please visit: www.mi.com
EU Declaration of Conformity
CE
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the radio equipment of type MJGJD01YL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found at the following internet address: https://www.mi.com/en/service/support/declaration.html.
Recycling
♻️
This product complies with the WEEE Directive. All products bearing this symbol are waste electrical and electronic equipment (WEEE) that should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences for the environment and human health. Please contact the installer or local authorities for more information on the location and terms and conditions of such collection points.
Cleaning, Maintenance, and Usage Errors
Use your device, battery, charger, and accessories with care. The following recommendations will help you keep your device in working order.
- Keep the device dry. Raindrops, humidity, and any liquid or water vapor may contain minerals that can damage electronic circuits.
- Do not use or store the device in dusty or dirty places.
- Do not store the device in environments with high temperatures. High temperatures can damage the device or battery.
- Do not store the device in cold places. When the device returns to its normal temperature, condensation may form inside the device, causing damage.
- Do not open the device in any way other than as specified in the user manual. Unauthorized modifications may damage the device and violate regulations concerning radio equipment. Do not drop, strike, or shake the device or battery. Rough handling may damage the device.
- To clean the surface of this device, use only a soft, clean, and dry cloth.
- Do not paint the device. Paint may interfere with proper operation.
- Keep the device away from magnets or magnetic fields.
To ensure the safety of your important data, store it in at least two different locations, such as your device, memory card, or computer, or write it down in a suitable place.
The device may heat up during prolonged operation. This is normal most of the time. To prevent overheating, the device may automatically slow down, close applications, stop charging, and shut down if necessary. If the device is not working as expected, take it to the nearest authorized service center.
Consumer Maintenance and Repair
There is no maintenance, repair, or periodic maintenance that consumers can perform on the device. If you require maintenance or repair, you can obtain support from the points listed in the Authorized Service list.
Precautions During Handling and Transportation
- Before transporting your device, ensure all connections are terminated and connected cables are disconnected.
- When packing, use the original box and packaging materials.
- When using the device and during subsequent relocation, take care to avoid damage from shaking, impact, heat, humidity, and dust.
