SLATTUM Upholstered Bed Frame
Assembly Instructions
Product Code: AA-2141870-3
Product Overview
This document provides step-by-step instructions for assembling the IKEA SLATTUM upholstered bed frame. Please follow these instructions carefully to ensure safe and correct assembly.
Important Notes:
- Ensure you have all parts and tools before starting.
- Assemble on a soft surface (like a carpet) to avoid scratching parts or your floor. [Floor protection symbol ?️]
- Two people are recommended for assembly. [People assembly symbol ???]
- If you encounter any issues or have questions, refer to the IKEA contact information (not provided in this document). [Assistance symbol ❓]
Parts List
| Part Name/Description | Part Number | Quantity |
|---|---|---|
| Allen Key | 130445 | 2x |
| Long Bolt | 106918 | 2x |
| Medium Bolt | 128574 | 20x |
| Short Bolt | 105107 | 4x |
| Very Short Bolt | 112091 | 8x |
| Bed Frame Connector / Bracket | 10050800 | 2x |
| Plastic Foot / Cap | 191315 | 4x |
Assembly Steps
Step 1
Attach side frame supports to the base.
Take the two base frame pieces. Insert the metal pins on the ends of the side frame supports into the corresponding holes on the base frame pieces. Ensure they are fully seated.
Diagram shows inserting pins into holes.
Step 2
Secure side frame supports to the base.
Using the Allen key (130445) and medium bolts (128574), fasten the side frame supports to the base frame. Insert two medium bolts per side and tighten.
Diagram shows using Allen key to insert bolts.
Step 3
Attach headboard support legs.
Take the two vertical headboard support legs. Align the bottom ends with the designated slots on the base frame. Insert the legs into the slots.
Diagram shows inserting vertical legs into slots on the base.
Step 4
Secure headboard support legs.
Using the Allen key (130445) and medium bolts (128574), attach the headboard support legs to the base frame. Insert two medium bolts per leg and tighten.
Diagram shows using Allen key to insert bolts into headboard legs.
Step 5
Position the central support beam.
Place the central support beam across the width of the bed frame. Align its ends with the attachment points on the side frame supports.
Diagram shows placing the horizontal central beam.
Step 6
Attach the central support beam.
Using the Allen key (130445) and long bolts (106918), secure the central support beam to the side frame supports. Insert two long bolts on each side and tighten.
Diagram shows using Allen key to insert long bolts.
Step 7
Attach headboard attachment brackets.
Take the two bed frame connectors (10050800). Slide them onto the top of the headboard support legs. Ensure they are oriented correctly for headboard attachment.
Diagram shows sliding connectors onto the top of the vertical legs.
Step 8
Attach the headboard to the frame.
Align the headboard with the assembled frame. Use the short bolts (105107) and plastic feet (191315) to secure the headboard to the frame. Insert four short bolts through the frame and into the headboard, then attach the plastic feet.
Diagram shows inserting short bolts and plastic feet to attach the headboard.
Step 9
Attach footboard side panels.
Slide the footboard side panels into their designated slots at the foot of the bed frame.
Diagram shows sliding panels into place at the foot of the bed.
Step 10
Secure footboard side panels.
Using the Allen key (130445) and medium bolts (128574), fasten the footboard side panels to the frame. Insert six medium bolts and tighten.
Diagram shows using Allen key to insert bolts into footboard panels.
Step 11
Position the central footboard support.
Place the central footboard support piece. Align it with the attachment points on the footboard side panels.
Diagram shows positioning the central piece at the footboard.
Step 12
Secure the central footboard support.
Using the Allen key (130445) and very short bolts (112091), attach the central footboard support. Insert four very short bolts and tighten.
Diagram shows using Allen key to insert very short bolts.
Step 13
Place bed slats.
Place the bed slats onto the support rails of the bed frame. Ensure they are evenly spaced across the width of the frame.
Diagram shows laying slats onto the frame.
Step 14
Secure bed slats.
Use the remaining medium bolts (128574) and the Allen key (130445) to secure the bed slats to the frame. Insert six medium bolts and tighten.
Diagram shows using Allen key to insert bolts to secure slats.
Step 15
Attach central slat support.
Attach the central slat support piece to the underside of the frame using the remaining very short bolts (112091) and the Allen key (130445). Insert eight very short bolts and tighten.
Diagram shows attaching a central support underneath the frame.
Step 16
Final check.
Ensure all bolts are tightened securely. Your SLATTUM bed frame is now assembled. Carefully move it to its desired location.
Diagram shows a final check symbol or a person admiring the finished bed.
