GLADSTAD Upholstered Bed Frame Assembly Instructions
IKEA Design and Quality
General Assembly Guidelines
The following diagrams illustrate general assembly principles and common symbols used throughout the instructions.
[Person] [hammer] [wood planks] [prohibited] - Do not use a hammer on wooden parts without proper support.
[Person] [hammer] [wood planks] [approved] - Use a hammer with appropriate support for wooden parts.
[Person] [parts] [prohibited] - Incorrect assembly is not permitted.
[Person] [parts] [on rug] [approved] - Assemble on a soft surface like a rug to prevent damage.
[Person] [question mark] [parts] - If unsure about a step, consult the instructions or support.
[Person] [phone] [IKEA logo] - Contact IKEA customer support if you have questions.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 106918 | Screw | 1x |
| 105109 | Screw | 4x |
| 122134 | Screw | 4x |
| 10046006 | Screw | 18x |
| 115461 | Screw | 4x |
| 10042206 | Screw | 14x |
| 100837 | Screw | 4x |
| 191315 | Bracket/Connector | 8x |
| 130445 | Bolt | 1x |
| 10050800 | Allen Key | 1x |
| 112353 | Foot/Leg | 1x |
| 10050334 | Foot/Leg Cap | 1x |
Step 1: Prepare Mattress Cover
Open the mattress cover and insert the mattress. Close the cover using the zipper. [Zipper icon] → [Zipper icon with arrow indicating closure].
Step 2: Attach Side Rails to Headboard
Take the headboard component. Attach the side rails to the headboard using the provided screws (122134, 105109, 10046006, 115461, 10042206) and the Allen key (10050800). Ensure the correct orientation as shown in the diagram.
Diagram shows two side rails being attached to the headboard with screws. The inset shows a close-up of the screw and bracket connection.
Step 3: Secure Fabric to Headboard
Attach the fabric or upholstered part of the headboard. The diagram shows a person pulling fabric and securing it with a zipper or velcro mechanism. [Zipper icon] → [Zipper icon with arrow indicating closure].
Step 4: Attach Feet to Base Components
Attach the feet (112353) to the bottom of the main base frame components. Screw them in securely. The diagram shows feet being screwed into pre-drilled holes.
Step 5: Assemble Base Frame
Connect the base frame pieces. Use screws (112353, 10050334) to join the parts. The diagram shows two long base pieces being joined by shorter connecting pieces.
Step 6: Attach Slats Support
Attach the central support beam and cross supports. Use screws (10042206, 105109, 10046006, 115461) and the Allen key (10050800). The diagram shows a central beam and two cross beams being attached to the side rails.
Diagram shows a central beam with two cross beams attached to the side rails. An inset shows a close-up of screw attachment. Another inset shows a warning symbol [triangle with exclamation mark] and a crossed-out hammer, indicating not to overtighten or use excessive force.
Step 7: Attach Side Rails
Attach the assembled side rails to the headboard. Use brackets (191315) and screws (105109, 10046006, 115461, 10042206) as shown. The diagram shows the side rails being connected to the headboard structure.
Diagram shows side rails being attached to the headboard. Insets show close-ups of bracket and screw connections.
Step 8: Attach Side Rails to Headboard (Continued)
Continue attaching the side rails to the headboard. Use screws (105109, 10046006, 115461, 10042206) and brackets (191315). The diagram shows the connection points.
Diagram shows side rails being attached to the headboard. Insets show close-ups of bracket and screw connections.
Step 9: Attach Cross Supports
Attach the cross support bars to the side rails. Use screws (106918, 130445). The diagram shows two cross bars being attached to the side rails, forming an 'X' shape.
Diagram shows cross supports being attached. An inset shows a close-up of the screw connection. Another inset shows a warning symbol [triangle with exclamation mark] and a crossed-out screw, indicating incorrect attachment.
Step 10: Attach Base Frame Pieces
Attach the base frame pieces to the side rails. Use screws (10046006, 115461, 10042206) and the Allen key (10050800). The diagram shows the long base pieces being attached to the lower part of the side rails.
Diagram shows base frame pieces being attached. An inset shows a close-up of screw attachment.
Step 11: Attach More Slats
Attach additional slats to the frame. Use screws (10042206, 105109, 10046006, 115461) and the Allen key (10050800). The diagram shows slats being screwed into place along the side rails.
Diagram shows multiple slats being attached. An inset shows a close-up of screw attachment.
Step 12: Attach Feet to Base
Attach the feet (115461, 191315, 130445) to the base structure. The diagram shows feet being attached to the corners of the base frame.
Diagram shows feet being attached. Insets show close-ups of attachment points and hardware.
Step 13: Connect Side Rails to Headboard
Connect the side rails to the headboard. Use brackets (191315) and screws (105109, 10046006, 115461, 10042206). The diagram shows the final connection of the side rails to the headboard.
Diagram shows side rails being attached to the headboard. Insets show close-ups of attachment points and hardware. A "STOP" symbol [STOP] with a crossed-out hammer [hammer] [prohibited] indicates caution.
Step 14: Connect Side Rails to Headboard (Continued)
Connect the side rails to the headboard. Use brackets (191315) and screws (105109, 10046006, 115461, 10042206). The diagram shows the connection points.
Diagram shows side rails being attached to the headboard. Insets show close-ups of attachment points and hardware. A "STOP" symbol [STOP] with a crossed-out hammer [hammer] [prohibited] indicates caution.
Step 15: Connect Side Rails to Headboard (Continued)
Connect the side rails to the headboard. Use brackets (191315) and screws (105109, 10046006, 115461, 10042206). The diagram shows the connection points.
Diagram shows side rails being attached to the headboard. Insets show close-ups of attachment points and hardware. A "STOP" symbol [STOP] with a crossed-out hammer [hammer] [prohibited] indicates caution.
Step 16: Connect Side Rails to Headboard (Final)
Connect the side rails to the headboard. Use brackets (191315) and screws (105109, 10046006, 115461, 10042206). The diagram shows the final connection of the side rails to the headboard.
Diagram shows side rails being attached to the headboard. Insets show close-ups of attachment points and hardware. A "STOP" symbol [STOP] with a crossed-out hammer [hammer] [prohibited] indicates caution.
Step 17: Attach Slats
Attach the remaining slats to the frame. Use screws (130445) and the Allen key (10050800). The diagram shows slats being attached to the side rails and central support.
Diagram shows slats being attached. An inset shows a close-up of screw attachment with a "STOP" symbol [STOP] and crossed-out hammer [hammer] [prohibited].
Step 18: Attach Slats (Continued)
Attach the remaining slats to the frame. Use screws (130445, 10042206). The diagram shows slats being attached to the side rails and central support.
Diagram shows slats being attached. An inset shows a close-up of screw attachment with a "STOP" symbol [STOP] and crossed-out hammer [hammer] [prohibited].
Step 19: Place Slats
Position the final set of slats into the frame. The diagram shows slats being placed into their designated slots on the side rails.
Diagram shows slats being placed into the frame.
