XOSS Vortex User Manual
360 x 360 mm, 80g
Product Introduction
Thank you for choosing XOSS Vortex. By installing it correctly on the left crank or front hub position, it accurately measures cadence or speed data and supports standard ANT+ and Bluetooth protocols. Connecting to APP, Cycling and ANT+ devices can help you carry out scientific riding training.
Product Accessories
- XOSS Vortex
- Rubber Mat (flat, curved)
- Rubber Band (large, small)
- CR2032 Battery (installed)
- User Manual
Quick Setup
Note: Remove the insulation sheet before use.
Installation
Speed Mode: Requires installation on the wheel hub.
Cadence Mode: Requires installation on the inside of the crank.
Installation Steps:
- Attach the rubber mat to the back of the sensor.
- Attach the sensor to the wheel hub (for speed mode) or crank (for cadence mode) using the rubber band.
Product Specification
- Battery: CR2032
- Sensor size: 40 x 30 x 10.7 mm
- Sensor weight: 10 g
- Battery life: over 300 hours of continuous use
- Working temperature: -20°C - 50°C
- Waterproof grade: IP67
- Wireless: ANT+, Bluetooth
XOSS APP Support
Download the XOSS APP by searching "XOSS" in the app store or scanning the QR code.
The XOSS Vortex has two modes: speed and cadence. The product indicates mode switching via LED blinking.
After-sales and Warranty
Thank you for purchasing XOSS products. The following product after-sales service policy is valid from the date of purchase. XOSS provides a one-year free warranty service. However, the following situations are not covered by the warranty:
- Battery consumption due to prolonged use (battery is a consumable item).
- Product damage caused by improper installation, disassembly, modification, or user error.
- Damage caused by improper use, such as exposing the product to high temperatures or water.
- Disassembly of the product by unauthorized service providers.
For any questions or further information, please contact your retailer or visit the XOSS website.
