Product Overview
The XOSS G+ is a smart GPS cycling computer designed for outdoor sports science, providing essential data for cyclists. It features GPS positioning, ANT+ sensor connectivity, and integration with the XOSS mobile application.
Key Features:
- Accurate GPS tracking
- ANT+ sensor compatibility (Speed, Heart Rate, Cadence, Power)
- Customizable data display
- Lap counting (Time, Distance, Location, Manual)
- XOSS App integration for data management and settings
- Waterproof design (IP67)
Device Display Description: The device screen displays real-time data including Speed (SPD), Gradient (GRAD%), Heart Rate (HR), Cadence (CAD), Time, Distance (DIST), Elevation (ELE), and Calories (CAL). It also shows lap count and battery status.
GPS Positioning
To acquire a GPS signal:
- Long press the right button to turn the device on.
- Short press the left button to start searching for GPS. The GPS icon will appear and flash.
- Remain still in an open, barrier-free area for a few minutes to acquire the signal. The device is ready when the GPS icon stops flashing and provides a BEEP prompt.
- Long press the left button to save the workout after ending a ride.
Note: The device supports outdoor recording only and requires a clear view of the sky.
Connecting with XOSS APP
Enhance your cycling experience by connecting the XOSS G+ to the XOSS mobile application:
- Download the XOSS app from Google Play or the App Store.
- Turn on your XOSS G+ and ensure Bluetooth is enabled on your phone.
- Open the XOSS app, navigate to 'Devices' > 'Bike Computers' > 'G/G+'.
- Follow the on-screen prompts to pair your device.
Once connected, you can customize settings such as Backlight, Key Tone, Auto Pause, Speed Alert, Tire Circumference, Units, and Time Zone. Workout data will automatically sync to the XOSS app.
Note: The XOSS app is designed for Bluetooth 4.0 or later versions. Long press the left button to end recording before connecting to the app.
Workout Management & Data Customization
Managing Workouts:
- Connect your XOSS G+ to the XOSS app.
- Navigate to 'Storage' > 'Workout'.
- Tap 'Edit' to select and delete or resync multiple workouts.
Custom Data Layout:
- Connect your XOSS G+ to the XOSS app.
- Select 'Data Layout' to customize the displayed data fields.
Requirements: Firmware version 1.09 or later; XOSS app version Android 3.10.2+ or iOS 3.11.0+.
Time Zone Setting:
- Connect your XOSS G+ to the XOSS app.
- Go to 'Settings' > 'User Profile' > 'Time Zone'. The device will sync with your phone's time zone.
Recordable Data Types: The device can record up to 50 types of data, including:
- Speed (AVG, MAX, LAP AVG, LAP MAX)
- Heart Rate (AVG, MAX, LAP AVG, LAP MAX)
- Power (AVG, 3S AVG, 10S AVG, 30S AVG, MAX, W/KG, LAP AVG, LAP MAX)
- Cadence (AVG, MAX, LAP AVG, LAP MAX)
- Time (PAUSED, TOTAL, LAP, LAP PAUSED, LAP TOTAL)
- Distance (LAP DISTANCE, ODOMETER)
- Elevation (ELEVATION, GAIN, GRAD, LOSS, MAX ELEVATION, VAM, LAP ELEVATION GAIN/LOSS/MAX, LAP VAM)
- Calories, Clock, Temperature, Laps
- Headlight Control, Taillight Control
ANT+ Sensor Connection
Pairing ANT+ sensors (e.g., Speed, Heart Rate, Cadence, Power meters) with your XOSS G+:
- Ensure the device is within 3 meters of the sensor and at least 10 meters away from other riders' sensors.
- Press both buttons simultaneously on the XOSS G+ until the ANT+ icon flashes, indicating it is searching for nearby sensors.
- Once a sensor is successfully paired, the icon will remain static.
Device Settings
You can configure various settings directly on the device:
- Tire Circumference Setting (mm): Use the left button to set numbers and the right button to switch positions. Long press the right button to proceed to the next step. (Example: P1, 2140)
- Metric/Imperial Unit Setting: Use the left button to switch between metric and imperial units. Long press the right button to proceed. (Example: P2)
- Time Zone Setting: Use the left button to switch numbers and the right button to switch positions. Long press the right button to finish the setting. (Example: P3, 00:00)
Customizable Function Button & Laps
Customizable Function Button: The middle button on the XOSS G+ is customizable. It can be used to start lap counting, control headlight and taillight switches, and toggle light modes. Further customization is available via the XOSS app.
Lap Counting Modes: The XOSS G+ supports four types of lap counting:
- Time-Based: Automatically counts a lap when a set time interval is reached.
- Distance-Based: Automatically counts a lap when a set distance is reached.
- Location-Based: Press the middle button to mark a location. The computer counts a lap each time it reaches the marked location.
- Manual: Press the middle button once to complete the current lap and start the next.
Note: All lap counting modes require successful GPS positioning to start. Long press the left button to end laps.
Firmware Upgrade
When new firmware is available, the XOSS app will notify you. It is recommended to keep the firmware updated for optimal performance.
Troubleshooting: If you encounter issues during a firmware upgrade (e.g., stuck in dFu mode), try toggling your phone's Bluetooth off and on again, then reconnect the XOSS app to resume the upgrade.
Packing List
The XOSS G+ package includes:
- XOSS G+ Cycling Computer x 1
- Cycling Computer Mount x 1
- Type-C USB Cable x 1
- Protection Rubber Pad x 1
- Rubber Band x 2
- User Manual x 1
Installation
Mounting the XOSS G+ cycling computer:
- Place the rubber pad on the back of the bike mount.
- Use a rubber band to secure the bracket to your handlebar or stem.
- Align the tabs on the back of the device with the grooves on the bike mount. Press down gently and rotate the device 90 degrees until it locks securely into place.
Visual Description: The installation shows a rubber band securing a mount to a handlebar, and then the cycling computer being attached to the mount via a 90-degree twist.
Specifications
- Name: XOSS G+ Smart GPS Cycling Computer
- Size: 55.6mm x 86.2mm x 18.4mm
- Product Weight: 58.5g
- Operating Temperature: -10°C to 50°C
- Endurance Time: 40 hours
- Battery: 600mAh Rechargeable Lithium Ion
- Waterproof Rating: IP67
- ANT+ Sensor Support: Speed Sensor, Heart Rate Monitor, Speed/Cadence Sensor, Power Meter
- Data Display: Supports 50 types of data
After-sales Service & Warranty
XOSS provides a one-year free warranty from the date of purchase. For warranty service, please contact your original dealer.
Conditions Not Covered by Warranty:
- Normal aging and degradation of the battery.
- Damage or loss resulting from improper installation.
- Damage caused by abnormal use, including exposure to high temperatures or water damage beyond the IP67 rating.
- Damage resulting from self-dismantling or unauthorized maintenance personnel.
Support
For additional product information and support, please visit:
