XOSS G+ Smart GPS Cycling Computer

GPS Positioning

1. Press and hold the right button to turn on.

2. Briefly press the left button to search for GPS. The GPS icon appears and starts blinking.

3. After starting, remain still for a few minutes to acquire the GPS signal. When the GPS icon stops blinking and a BEEP is indicated, the device is ready.

4. Press and hold the left button to save the workout after finishing the ride. The cycling computer resets to the initial interface.

Note: To search for a GPS signal, please remain still and ensure your device is used in an open area without obstructions. Additionally, the device only supports outdoor recording.

Device Display Description: The XOSS G+ cycling computer displays various metrics including Speed (26.8 KM/H), Laps (03), Grade (2%), Heart Rate (168 BPM), Cadence (228 RPM), Distance (102.8 KM), Calories (2968 CAL), and Elevation (68m). It shows the time (12:28) and battery status (26.0). Buttons are indicated by icons: Play/Pause (▷II), Lap/Reset (X), and Power/Mode (☊).

Battery Capacity Icons:

• >75%
• >50%
• >25%
• >5%
• <5%

Connect with XOSS APP

Search for XOSS in Google Play/App Store, or scan the QR code to download the XOSS APP.

1. Turn on the XOSS G+ and ensure your phone's Bluetooth is activated.
2. Open the XOSS APP, select Devices > Bike Computers > G/G+.

After connecting XOSS G+ to XOSS APP: click on settings to change backlight, key tone, auto-pause, speed alert, tire circumference, units, time zone, etc.; workout data will automatically synchronize with XOSS APP.

Note: Before connecting the device, press and hold the left button to ensure the device is at the end of the recording. The app is designed for Bluetooth 4.0 or later versions.

Workout Management

1. Connect G+ to XOSS APP.
2. Click on Storage > Workout.
3. Click "Edit" in the upper right corner to select one or more workouts you wish to delete or re-synchronize.

Custom Data Design

1. Connect G+ to XOSS APP.
2. Click on Data Design.

• Firmware version requirement: Version 1.09 or later
• XOSS App version: Android 3.10.2 or later, iOS 3.11.0 or later.

Time Zone Configuration in XOSS APP

1. Connect G+ to XOSS APP.
2. Click on Settings > User Information > Time Zone.

It will synchronize the device with the phone's time zone.

Record 50 Data Types

The XOSS G+ can display and record up to 50 types of data. These include:

• Speed/average speed/maximum speed/average speed per lap/max speed per lap
• Heart rate/average heart rate/maximum heart rate/average heart rate per lap/max heart rate per lap
• Power/average power/3s average power/10s average power/30s average power/maximum power/average power per lap/max power per lap/W/KG
• Cadence/average cadence/maximum cadence/avg cadence per lap/max cadence per lap/
• Moving time/pause time/total time/time per lap/pause time per lap/total time per lap
• Distance/distance per lap/Odometer
• Elevation/elevation gain/grade/elevation loss/maximum altitude/VAM /elevation gain per lap/elevation loss per lap/max altitude per lap/LAP VAM
• Calories/calories per lap/current time/temperature/laps
• Front light control/rear light control

ANT+ Sensor Connection

1. Place the device 3 meters from the sensor and 10 meters from other people's sensors.

2. Press both buttons on the XOSS G+ simultaneously until the icon blinks, meaning XOSS G+ is searching for a nearby sensor. The icon blinks.

3. If pairing is successful, the icon will remain static. Press the right button again to enter the "Tire Circumference" adjustment interface. The icon is static.

Configuration of [Tire Circumference] [Metric/Imperial Units] [Time Zone]

Tire Circumference Configuration (mm)

Press the left button: set numbers. Press the right button: change position. Press and hold the right button: next step.

Metric/Imperial Units Configuration

Press the left button: change unit. Press and hold the right button: next step.

Time Zone Configuration

Press the left button: change numbers. Press the right button: change position. Press and hold the right button: final configuration.

Customizable Function Button

The central button of the G3+ cycling computer is a customizable function button. It can be used to start lap counting, control front and rear light switches, and cycle through different light modes, among other functions. More customization options can be configured in the XOSS application.

Laps

The G3+ cycling computer supports four types of lap counting: time-based, distance-based, location-based, and manual laps.

• Time-based Lap Counting: Automatically counts a lap when the configured time interval is reached.
• Distance-based Lap Counting: Automatically counts a lap when the configured distance is reached.
• Location-based Lap Counting: Press the central button to mark a location. The computer will automatically count a lap each time the marked location is reached.
• Manual Lap Counting: Pressing the central button once completes a lap and starts the next one.

All four lap counting modes require a successful GPS position to start. Press and hold the left button to end lap counting.

Firmware Updates

The XOSS APP will prompt you to update when new firmware is available. It is best to keep the firmware up-to-date.

If you get stuck in dFU mode during firmware update, you can try turning Bluetooth off and on again in your phone's settings and reconnecting the XOSS APP to update again.

Package Contents

• XOSS G+ x 1
• Support for Cycling Computer x 1
• USB Type-C Cable x 1
• Protective Rubber Pad x 1
• Rubber Bands x 2
• User Manual x 1

Installation

1. Place the rubber pad on the back of the bicycle support.
2. Use an elastic band to secure the support to the handlebar or stem.
3. Align the tabs on the back of the device with the slots on the bicycle support, press down gently, and rotate the device 90 degrees until it locks into place.

Diagram Description: Secure the base transversely with an elastic band. Install the cycling computer.

Specifications

• Name: XOSS G+ Smart GPS Cycling Computer
• Size: 55.6mm x 86.2mm x 18.4mm
• Product Weight: 58.5g
• Operating Temperature: -10°C~50°C
• Duration: Up to 40 hours
• Battery: 600mAh Rechargeable Lithium-ion
• Waterproof: IP67
• ANT+ Sensor: Speed Sensor, Power Meter, Cadence Sensor, Heart Rate Monitor
• Data Display: Display of 50 Data Types

After-sales and Warranty

It has a free one-year warranty from the date of purchase. Please contact your original distributor for warranty service.

However, the following conditions are not covered by the warranty:

1. The battery is a consumable product and is not covered by the warranty.
2. Loss or damage to the product caused by incorrect installation.
3. Damage to the product caused by abnormal use, such as high temperatures, immersion in water, etc.
4. Damage caused by self-disassembly or by unauthorized repairers.

Support

Visit https://www.xoss.co or help.xoss.co for more information about the product.