XOSS G+ Smart GPS Cycle Computer

[Image of XOSS G+ device displaying GPS, Speed, Time, Heart Rate, Cadence, Distance, Calories, and Elevation]

Left Button:

• Long press: End recording
• Short press: Start/Pause/Resume

Right Button:

• Long press: Power On/Off
• Short press: Switch data display

Battery Level:

• >75%
• >50%
• >25%
• <5%

Note: During charging, the battery icon at the top right will change from empty to full. When the three battery bars stop flashing, it means charging is complete.

[Image of XOSS APP logo and QR code]

Steps:

1. Turn on XOSS G+ and ensure your smartphone's Bluetooth is enabled.
2. Open the XOSS app, navigate to [Devices] > [Cycle Computer] > [G/G+].

After connecting XOSS G+ to the XOSS APP, click "Settings" to change settings such as backlight, key tone, auto pause, speed alert, tire circumference, units, and time zone. Workout data will be automatically synchronized to the XOSS app.

Note: Before connecting, long press the left button to end the recording. The XOSS app supports Bluetooth 4.0 and later versions.

[Image displaying various data screens of the XOSS G+ device, showing different data combinations like Speed, Heart Rate, Cadence, Distance, Calories, Elevation, Time, Temperature, Gradient, Pause Time, Vertical Speed, Elevation Gain/Loss, Total Distance, Estimated Power, Max Speed, Max Heart Rate, Max Cadence, Total Time, Max Elevation]

Data Fields:

• CLOCK (Current Time)
• TEMP (Temperature)
• SPD (Speed)
• GRD (Gradient)
• HR (Heart Rate)
• CAD (Cadence)
• TIME (Moving Time)
• DISTANCE (Distance)
• CALORIE (Calories)
• ELEVATION (Elevation)
• AVG (Average Speed)
• AVG (Average Heart Rate)
• AVG (Average Cadence)
• PAUSE (Stop Time)
• GAIN (Elevation Gain)
• VAM (Vertical Ascent Rate)
• LOSS (Cumulative Elevation Loss)
• MAX (Maximum Speed)
• MAX (Maximum Heart Rate)
• MAX (Maximum Cadence)
• TOTAL (Total Time)
• ODO (Total Distance)
• PWR(e) (Estimated Power)
• MAX (Maximum Elevation)

[Image showing XOSS G+ device with ANT+ icon flashing]

Bring the device within 3 meters of the sensor. For other riders' sensors, maintain a distance of 10 meters.

[Image showing XOSS G+ device with ANT+ icon flashing]

Press and hold both buttons on the XOSS G+ until the ANT+ icon flashes. This indicates that the XOSS G+ is searching for nearby active sensors.

[Image showing XOSS G+ device with ANT+ icon solid]

After the ANT+ pairing icon stops flashing, press the right button again to enter the "Tire Circumference" setting screen.

The icon will be solid.

[Image showing setting screen for Tire Circumference (P1)]

Tire Circumference Setting (mm):

• Left button click: Set number
• Right button click: Change position
• Long press right button: Go to next page

[Image showing setting screen for Metric/Imperial Units (P2)]

Metric/Imperial Units Setting:

• Left button click: Switch units
• Long press right button: Go to next page

[Image showing setting screen for Time Zone (P3)]

Time Zone Setting:

• Left button click: Set number
• Right button click: Change position
• Long press right button: Save settings

[Image of XOSS G+ device, bike mount, protective rubber band, rubber bands, Type-C USB charging cable, and user manual]

• XOSS G+ x 1
• Bike Computer Mount x 1
• Protective Rubber Band x 1
• Rubber Bands x 2
• Type-C USB Charging Cable x 1
• User Manual x 1

[Diagram showing how to attach the rubber band to the mount and handlebar, and how to attach the cycle computer to the mount]

Rubber Band Mount Handlebar 90°

Secure the base with rubber bands in a cross pattern. Attach the cycle computer.