Ilumi Ambient Wakeup Light WL201

Introduction

Thank you for purchasing the "Illumi Ambient Wakeup Light". This manual provides information on the product's use and maintenance. The Illumi Ambient Wakeup Light simulates a gentle sunrise for a natural and pleasant waking experience. It features a dual lighting system with spectral colors and sunlight dawn-dusk simulation. Users can select from thousands of colors and sync the alarm with a smartphone app to wake up during a light sleep phase. Light intensity can be adjusted to suit individual sensitivity.

Important Safety Instructions

DANGER

• Follow care and maintenance instructions for cleaning.
• Do not immerse the unit in liquid to prevent electric shock or fire.
• Do not pull the power cord to move or unplug the unit.
• Do not disassemble the unit when plugged in or operating.
• Do not clean the power jack with water, liquids, or solvents.
• Do not plug or unplug the power cord with wet hands.

WARNING

• Use the unit only for its intended purpose and within specified technical data.
• This unit is not intended for use by children or persons with reduced capabilities unless supervised.
• Use only the provided adapter.
• Do not operate if the unit or adapter is damaged; switch off and unplug immediately if malfunctioning.
• This product is for indoor use only.

General Notes

• The light intensity level can be adjusted for waking up.
• Experiment with brightness levels to find your most comfortable setting.
• Others in the same room may be unintentionally woken by the light due to differing light sensitivities.
• Refer to the user manual mentioned within the "Illumi sleep app" for detailed app information.
• Images in this manual may differ from the actual display.
• Reproduction of manual contents requires manufacturer permission.

IMPORTANT

• Read this manual before first use and save it for future reference.
• Consult a doctor before use if you have or have had serious depression.
• The "Illumi sleep app" monitors sleep patterns to optimize wake-up light timing. This unit is not a precise instrument.
• This product does not reduce the need for sleep.
• THIS PRODUCT AND ITS SMARTPHONE PROGRAM ARE NOT MEDICAL DEVICES.

Do's and Don'ts

DOs

• Place the unit stably on a dry, level, water-resistant surface.
• Unplug the unit from mains power when not in use.
• Supervise children and pets to ensure they do not play with the unit.
• Dispose of the product separately for special waste treatment.

DON'Ts

• Do not tamper with internal components; this invalidates the warranty.
• Do not subject the unit to excessive force, shock, dust, temperature, or humidity.
• Do not cover the unit when operating.
• Do not immerse the unit in water; dry spills immediately with a soft cloth.
• Do not clean with abrasive or corrosive materials.
• Do not dispose of old batteries as unsorted municipal waste.

Overview

Front View

The front of the unit features:

• 1. LCD Display: Shows time, status, and icons.
• 2. Touch-control lamp: The main light source, responsive to touch.
• 3. 3.5 mm audio jack: For connecting audio devices.
• 4. USB connector: For power or audio connection (depending on device).

Bottom View

The bottom of the unit includes:

• 5. Battery slot: For backup power.
• 6. Power adaptor DC jack: For connecting the power adapter.
• 7. Set clock buttons: Buttons for setting the clock.
• 8. Reset: A reset button.

Back View

The back of the unit contains:

• 9. Speaker: For alarm sounds and radio.

Remote Control

Functions

• Toggle "Mood Moment" mode: Press the [Mood Moment button].
• Option Key: Press to enter alarm setting mode.
• Light Mode Toggle: Short press to toggle between "Warm White Light" / "Moonlight" mode. Long press to turn off the light.
• Dusk Simulation: Press the [Dusk Simulation button] to turn ON/OFF.
• Radio: Press the [Radio button] to toggle the radio ON/OFF.
• Mood Music Select: Use the [Mood Music Select button] to select Mood Moment music.
• Volume Select: Use the [Volume Select button] to select sound volume.
• Alarm Toggle: Press the [Alarm Toggle button] to toggle alarm ON/OFF.
• Alarm Time Adjust: Use the [Alarm Time Adjust button] to adjust alarm time.
• Alarm Sound Select: Use the [Alarm Sound Select button] to select soothing alarm sound or radio alarm.
• Wakeup Light Toggle: Use the [Wakeup Light Toggle button] to toggle wakeup light ON/OFF.
• Brightness Adjust: Use the [Brightness Adjust button] to adjust light intensity (level 1-5).
• Breathing Light: Press the [Breathing Light button] to toggle to Breathing Light in Moodlight mode.
• Sleep Time Adjust: Use the [Sleep Timer button] to adjust the sleep time.
• Scan: Long press the [Scan button] to scan for the next receivable station.
• Tune: Short press the [Tune button] to tune upward/downward.
• Volume Up/Down: Use the [Volume Up/Down buttons] to adjust speaker volume.

Display Icons

• AM/PM display
• ? Low battery indicator
• ? Dusk Simulation ON
• ⏰ Wakeup light ON
• ⏰ Alarm ON
• ? Mood Moment ON
• ? Light ON
• ? Radio ON
• ? Smartphone connected

Getting Started

A. Connecting to Mains Power

1. Remove the cover at the bottom of the unit.
2. Insert the adapter cable into the power adapter DC jack [DC Power Jack].
3. Plug the adapter into a mains socket.
4. Take out the insulating film in the battery slot [Battery Slot].
5. Replace the cover on the unit.

B. Setting the Clock

1. Press the [Set Clock button] once to enter set clock mode.
2. Press the [Plus button] or [Minus button] to select 12 or 24-hour format. Press the [Confirm button] to confirm.
3. Press and hold the [Plus button] or [Minus button] to adjust the time. Press the [Confirm button] to confirm. The clock can be synchronized automatically to a smartphone if the affiliated app is installed.

C. First Use of the Remote Control

1. Turn the battery compartment cover of the remote control anti-clockwise to remove it.
2. Remove the insulating film in the battery slot and replace the cover.

IMPORTANT: Pull out insulating films for first use; otherwise, the remote control will not work.

D. Placement

For optimal wake-up light experience, place the Ambient Wakeup Light 30-40 cm from your head.

Setting the Alarm

Alarm setup is done via the remote control or the smartphone app.

1. Alarm Time Setup: Press and hold the [Alarm Setting button] on the remote control for 3 seconds. The pre-set alarm time will flash, and the ⏰ icon will appear on the display. While the time is flashing, press the [Plus button] or [Minus button] to adjust the alarm time. Press the [Confirm button] to confirm.
2. Choosing the Alarm Sound: Press the [Plus button] or [Minus button] to toggle between "wake up by soothing sound" or "wake up by radio". Wait 2 seconds for the corresponding icon to show on the LCD display.
   • Soothing Sound: Press the [Sound Select button] (or [Plus button]/[Minus button]) to cycle through and preview the 7 soothing sounds (Rain, Brook, Ocean, Cricket, Campfire, White Noise, Beep). Press the [Confirm button] to confirm your selection.
   • Radio Alarm: Press the [Tune button] (or [Plus button]/[Minus button]) to tune the signal up or down. Long press these buttons to scan and preview receivable stations. Press the [Confirm button] to confirm your selection.
3. Wakeup Light Option: Press the [Plus button] or [Minus button] to select ON or OFF for the wakeup light. Press the [Confirm button] to confirm the Wakeup Light option and exit alarm setting mode.
4. Toggling Alarm ON/OFF: When the unit is in clock mode, press the [Alarm On/Off button] once. Then press the [Plus button] or [Minus button] to toggle the alarm setup ON or OFF. Wait 2 seconds to return to clock mode. The corresponding icon will show on the LCD display. Press the [Confirm button] to confirm.

Alarm Stop / Snooze

1. To stop the alarm, place your hand on the unit and hold for 1 second.
2. Press any key on the remote control to snooze the alarm. The selected alarm sound/radio and wakeup light (if selected) will resume after 8 minutes. The alarm sound/radio and wakeup light will flash during snooze.

Music Playback

For Android devices, music can be played via the 3.5mm audio jack. For iPhone, iPad, and iPod devices, music can be played via the 3.5mm audio jack or USB connector.

1. Open the jack cover at the side of the unit.
2. Connect the USB for digital connection or the 3.5mm jack for audio to your smart device. For iOS devices, the ? Smartphone Icon will show on the LCD display.
3. Operate your device's music player to start music playback.
4. Adjust the volume using the [Volume Up button] or [Volume Down button] on the remote control, or by changing the volume on your smart device.

For issues playing music from a smartphone, refer to your smart device's user manual. (Smartphone USB cable is not provided).

FM Radio

1. Press the [Radio button] on the remote control. The ? Radio ON icon will show on the LCD display.
2. Long press the [Scan button] or [Tune button] to search for the next receivable station. Short press the [Tune Up button] or [Tune Down button] to tune the radio frequency.
3. Press the [Volume Up button] or [Volume Down button] to adjust the speaker volume.
4. Press the [Radio button] again to turn off the radio.

Light Modes

Sunlight Mode

1. Press the [Sunlight Mode button] once to turn on "Sunlight" mode.
2. Press the [Brightness Up button] or [Brightness Down button] to adjust the brightness from 1 to 4.
3. Press and hold the [Sunlight Mode button] for 2 seconds to switch off the light. The icon flashes during this mode.

Mood Light Mode

1. Press the [Mood Light Mode button] twice to enter "Mood Light" mode. The light will slowly shift through a wide spectrum of colors.
2. During the color cycle, press the [Plus button] or [Minus button] to switch to breathing mode. Press and hold the [Mood Light Mode button] for 2 seconds to switch off the light. The icon flashes during this mode.

Dusk Simulation

Dusk Simulation gradually changes light levels to imitate natural dusk transitions. Lights dim over a pre-set duration (5 to 60 minutes), and music or radio fades out within this period.

1. Press the [Dusk Simulation button] on the remote control once. The ? icon will show on the LCD display.
2. Press the [Sleep Timer Up button] or [Sleep Timer Down button] to adjust the sleep timer duration.
3. Press the [Confirm button] to exit to clock mode. The timer will start internally, and the light level will reset to maximum automatically.
4. Press the [Dusk Simulation button] anytime to check the countdown. The dusk simulation effect starts in the last 10 minutes of the countdown. (Dusk simulation is not allowed if an alarm is set to start within 20 minutes.)

Mood Moment

Illumi Ambient provides ambient light with mood music for enjoyment.

1. Press the [Mood Moment button] on the remote control once to enter MOOD MOMENT mode. The display shows "OFF" or a "MOOD MOMENT" scenario number.
2. Press the [Scenario Select Up button] or [Scenario Select Down button] to select a scenario (6 options available).
3. Press the [Volume Up button] or [Volume Down button] to control the mood music volume.
4. Wait for 4 seconds to return to standby mode.
5. Repeat step 1 to change music. You can control the mood music volume using the [Volume Up button] or [Volume Down button] while MOOD MOMENT is active.

Low Battery Indication

Change the battery if the ? icon shows on the screen.

Specifications

About Oregon Scientific

Visit the Oregon Scientific website (www.oregonscientific.com) for more product information. For customer care in the US, visit: https://us.oregonscientific.com/service/support.asp or call 1-800-853-8883. For international inquiries, visit: www.oregonscientific.com.

Oregon Scientific Global Distribution Limited reserves the right to amend this user manual at its sole discretion without prior notice. In case of inconsistency, the English version shall prevail.

Declarations and Compliance

EU Declaration of Conformity: Oregon Scientific declares that the illumi Ambient Wakeup Light (model: WL201) complies with Directive 2004/108/EC. A copy of the Declaration of Conformity is available upon request.

Canadian Compliance: This Class B digital apparatus complies with Canadian ICES-003.

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation between equipment and receiver, or consulting the dealer.