VIHALS Sideboard Assembly Instructions

Safety First

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install the anti-tip device provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.

Read and follow each step of the instructions carefully.

Tools and Wall Mounting

Tools required:

Screwdrivers (Phillips and flathead) ?
Hammer ?
Drill ड्रिल

Wall mounting requires appropriate screws and plugs for your wall type. The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.

Wall Mounting Types:

Type A (Solid/Hollow Walls): Drill hole: Ø 8 mm (5/16"). Insert plug. Screw in bracket.

Type B (Solid/Hollow Walls): Drill hole: Ø 8 mm (5/16"). Insert plug. Screw in bracket.

Type C (Solid Wood): Drill hole: Ø 3 mm (1/8"). Screw bracket directly.

Parts Overview

The following parts and hardware are included in the package:

Hardware: Screws (e.g., 10048881, 10061178, 10100254, 10107020, 101345, 10050769, 10050771, 10077982, 101345, 105811, 146114, 10003780, 105811, 106989, 109049, 100823, 109048, 105811, 155370, 10051660, 10102154, 10107001, 10071303, 10071494, 10099810, 10106969, 145718, 159553, 10096669, 130449, 119030, 117434, 131361, 10040242), Dowels (e.g., 101345), Drawer Runners (IKEA CL, IKEA CR, IKEA DL, IKEA DR), Brackets, and other assembly components. Quantities are indicated in the diagrams.

Assembly Steps

Step 1

Attach drawer runners labeled IKEA CL and IKEA CR to the corresponding panels using screws (10048881). Ensure correct orientation as shown in the magnified view.

Step 2

Attach drawer runners labeled IKEA CR to the panels using screws (10048881). Pay attention to the alignment indicated.

Step 3

Attach drawer runners labeled IKEA CL to the panels using screws (10048881). Ensure the runners are positioned correctly.

Step 4

Connect the base panels using the provided screws (e.g., 10061178, 10100254, 10107020). Dowels might be used for alignment.

Step 5

Attach side panels to the base using screws (101345) and dowels (101345).

Step 6

Connect the side panels to the base structure, ensuring they are flush and secure.

Step 7

Continue assembling the main frame by connecting the remaining side panels using screws.

Step 8

Secure the side panels to form the main cabinet structure.

Step 9

Insert dowels (101345) into the designated holes on the panels for alignment and support.

Step 10

Insert dowels (101345) and attach the next horizontal panel using screws.

Step 11

Attach the top panel to the assembled frame using screws (10050769, 10050771).

Step 12

Secure the second top panel using screws (10050769, 10050771).

Step 13

Attach the final top panel using screws (10050769, 10050771).

Step 14

Attach the drawer slides to the inside of the cabinet using screws (10077982).

Step 15

Continue attaching drawer slides to the cabinet interior with screws (10077982).

Step 16

Attach the wall mounting brackets to the top rear of the cabinet using screws (10003780, 105811, 146114).

Step 17

Secure the wall mounting brackets to the cabinet using screws (100823, 106989, 109049).

Step 18

Information on wall mounting: The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.

Step 19

Attach the wall mounting brackets to the cabinet using screws (100823, 109048).

Step 20

Attach drawer runners to the cabinet interior using screws (105811, 155370).

Step 21

Attach drawer runners to the cabinet interior using screws (10051660, 10102154, 10107001).

Step 22

Continue attaching drawer runners to the cabinet interior.

Step 23

Assemble the drawer boxes by joining the drawer sides and bottom, securing with screws (10071303).

Step 24

Attach the drawer fronts to the assembled drawer boxes.

Step 25

Attach the drawer fronts using screws (10071494, 10099810, 10106969, 146114).

Step 26

Attach the doors to the cabinet hinges using screws (102384).

Step 27

Assemble the drawer boxes, securing components with screws (130449) and dowels.

Step 28

Continue assembling drawer boxes, using screws (119030, 117434, 131361) for connection.

Step 29

Complete the assembly of the drawer boxes.

Step 30

Slide the back panel into the grooves of the cabinet frame.

Step 31

Attach the drawer slides to the drawer boxes using screws (10040242).

Step 32

Assemble the drawer boxes, ensuring all parts are correctly aligned.

Step 33

Secure the drawer box components using screws (145718, 159553, 10096669).

Step 34