IKEA PAX Wardrobe Frame Assembly Guide

Important Safety and Installation Information

Important! This furniture must be fixed to the wall with the enclosed wall fastener. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home (not included). If you are uncertain about what type of screw or fitting to use, please contact your hardware store.

For horizontal assembly and subsequent raising of the wardrobe, ensure the ceiling height exceeds 244 cm (95 2/3"). Horizontal assembly is described on page 16.

Tools Required

The following tools are typically needed for assembly:

Screwdrivers (various types) ?
Hammer ?
Spirit Level ?
Tape Measure ?
Ladder ?
Clamp ?️
Electric Drill ड्रिल

Safety Note: Always ensure safe handling of parts. It is recommended to have two people for lifting and assembly to prevent injury or damage.

Parts List

The following components are included:

2x Side Panels (Part No. 115345)
1x Top Panel
1x Base Panel
2x Shelves
12x Cam Lock Screws (Part No. 112996) ?
12x Cam Locks (Part No. 105248) ⚙️
16x Dowels (Part No. 101375) ?
40x Screws (Part No. 101206) ?
2x Screws (Part No. 100402) ?
2x Screws (Part No. 100644) ?
4x Screws (Part No. 115345) ?
2x Long Bolts (Part No. 110618) ?
12x Cam Locks (Part No. 113434) ⚙️
2x Base Supports (Part No. 110617)
2x Corner Brackets (Part No. 102591)
1x Corner Bracket (Part No. 105494)
2x Wall Brackets (Part No. 103693)
2x Bracket Covers (Part No. 100751)
4x Cover Caps (Part No. 115346)

Assembly Steps

Step 1: Prepare Side Panels

Insert 12x cam lock screws (112996 ?) into the pre-drilled holes on the two side panels (115345).

Step 2: Prepare Base and Top Panels

Insert 12x cam locks (105248 ⚙️) into the corresponding holes on the base and top panels.

Step 3: Insert Dowels

Insert 16x dowels (101375 ?) into the designated holes on the side panels.

Step 4: Attach Back Panel Support to Base

Attach the back panel support (110618 ?) to the base panel using 2x screws (101206 ?).

Step 5: Prepare Shelves

Insert 4x cam lock screws (101375 ?) into the shelves. Note: Part 101375 is also used as a dowel.

Step 6: Insert Cam Locks into Shelves

Insert 3x cam locks (113434 ⚙️) into the shelves.

Step 7: Connect Shelves to Side Panel

Connect the shelves to one of the side panels by aligning the dowels and cam lock screws with the corresponding holes. Insert and tighten the cam locks (105248 ⚙️) in the side panel to secure the shelves.

Step 8: Attach Second Side Panel

Attach the second side panel to the other end of the shelves, aligning dowels and cam locks. Insert and tighten the cam locks (105248 ⚙️) in the side panel.

Step 9: Attach Top Panel

Place the top panel onto the assembled sides and shelves. Secure it by inserting and tightening the cam locks (110617 ⚙️) in the top panel.

Step 10: Attach Top Back Panel Support

Attach the back panel support (113434 ?) to the top panel using 2x screws (101206 ?).

Step 11: Attach Back Panel

Slide the back panel into the grooves on the side, top, and base panels. Secure it using 2x cam locks (110617 ⚙️) on the top and bottom edges of the back panel.

Step 12: Secure Back Panel with Brackets

Use 1x corner bracket (105494) to secure the back panel to the frame, using screws (101206 ?).

Step 13: Secure Back Panel with More Brackets

Use another 1x corner bracket (105494) on the opposite side to further secure the back panel.

Step 14: Attach Base Panel

Attach the base panel to the bottom of the frame using 37x screws (105494 ?).

Step 15: Attach Hinges to Frame

Attach the hinge mounting plates to the inside of the wardrobe frame using the provided screws.

Step 16: Attach Hinges to Doors

Attach the hinge arms to the wardrobe doors.

Step 17: Mount Doors

Carefully mount the doors onto the wardrobe frame by connecting the hinge arms to the mounting plates.

Step 18: Adjust Doors

Adjust the doors using the hinge adjustment screws to ensure they are level, aligned, and close properly.

Final Wall Fastening

Crucial Safety Step: To prevent tipping, the wardrobe MUST be secured to the wall using the provided wall fastening kit. This involves attaching wall brackets (103693) to the unit and then to the wall. Ensure you use screws and fixings appropriate for your specific wall type (these are not included). Drill holes of approximately 5 mm (1/4") as indicated.

	IKEA PAX Corner Unit Assembly Instructions Official assembly guide for the IKEA PAX corner unit. Detailed steps and part identification for building your PAX wardrobe system.
	IKEA PAX Wardrobe Assembly Instructions Comprehensive assembly guide for the IKEA PAX wardrobe system, detailing step-by-step instructions and safety warnings for safe and proper installation.
	IKEA PAX Wardrobe Assembly Instructions A comprehensive guide detailing the assembly process for the IKEA PAX wardrobe system, including a parts list, required tools, and step-by-step instructions with textual descriptions of diagrams.
	IKEA PAX Wardrobe Assembly Instructions A comprehensive guide detailing the assembly process for the IKEA PAX wardrobe system, including a parts list and step-by-step instructions for building and installing the unit.
	PAX Wardrobe Assembly Instructions - IKEA Step-by-step assembly guide for the IKEA PAX wardrobe, including important safety warnings and wall attachment instructions. Learn how to safely build and secure your PAX wardrobe.
	IKEA PAX Wardrobe Assembly Guide Step-by-step instructions for assembling the IKEA PAX wardrobe system, including parts list, tools, safety, and installation guidance.
	IKEA PAX Wardrobe Assembly Instructions & Safety Guide Detailed assembly instructions and critical safety warnings for the IKEA PAX wardrobe system. Learn how to safely construct and install your PAX furniture, including essential tip-over prevention measures and parts identification.
	IKEA NORDLI Modular Chest of Drawers Assembly Instructions Step-by-step guide for assembling the IKEA NORDLI modular chest of drawers, including a parts list and detailed instructions for each stage of construction.