Parts List
| Group | Part Number | Quantity |
|---|---|---|
| A | 102509 | 8x |
| A | 100349 | 16x |
| A | 101345 | 8x |
| A | 118331 | 4x |
| A | 112996 | 4x |
| B | 145718 | 12x |
| B | 101372 | 12x |
| B | 125325 | 12x |
| B | 10076576 | 12x |
| B | 118331 | 12x |
| B | 112996 | 24x |
| B | 119030 | 6x |
| B | 147191 | 6x |
| B | 104663 | 6x |
| C2 | 122972 | 2x |
| C2 | 122973 | 2x |
| C2 | 106940 | 2x |
| C2 | 100498 | 2x |
| C2 | 131396 | 1x |
Assembly Steps
Step 1
Attach base supports to the bottom panels.
Use four pieces of part 102509 to connect components to the base panels.
Step 2
Attach drawer slide rails (labeled 'L') to the base panels.
Secure three slide rails to each base panel using part 100349 (3x) and part 125326 (3x).
Step 3
Attach drawer slide rails (labeled 'R') to the base panels.
Secure three slide rails to each base panel using part 100349 (3x) and part 125325 (3x).
Step 4
Attach additional components to the base assembly.
Use four pieces of part 118331.
Step 5
Attach side panels to the base assembly.
Insert and secure two side panels using eight pieces of part 101345.
Step 6
Secure the side panels.
Use two pieces of part 102509.
Step 7
Secure the side panels.
Use two pieces of part 102509.
Step 8
Attach drawer slides to the main frame.
Rotate the frame and attach two sets of drawer slides using part 100349 (2x) and part 131396.
Step 9
Assemble drawer components.
Use four pieces of part 118331 and 112996 for drawer assembly.
Step 10
Attach components to the frame.
Use four pieces of part 101372.
Step 11
Attach side panels.
The diagram shows attaching side panels to the frame.
Step 12
Attach components to the frame.
Use two pieces of part 119030 and part 101372.
Step 13
Attach a panel, showing a hinge mechanism.
The diagram illustrates attaching a panel with a hinge.
Step 14
Attach a panel.
The diagram shows attaching another panel.
Step 15
Attach a panel.
The diagram shows attaching a final panel to complete a section.
Step 16
Attach components to the frame.
Use two pieces of part 119030.
Step 17
Attach a panel.
The diagram shows attaching a panel to the structure.
Step 18
Attach components to the frame.
Use four pieces of part 145718.
Step 19
Attach components to the frame.
Use four pieces of part 119030.
Step 20
Attach drawer slides to the drawer boxes.
Use two pieces of part 147191 for the drawer slides.
Step 21
Attach drawer slides to the drawer boxes.
Use four pieces of part 104663 for the drawer slides.
Step 22
Insert drawers into the unit.
Align the drawer slides on the drawer with the corresponding slides inside the unit and push gently. An information icon [i] indicates a warning about the orientation of the drawer unit, suggesting it should not be placed upside down or on its side during assembly.
Step 23
Complete drawer insertion.
Push the drawer fully in until it clicks into place, securing it to the unit. The diagram shows the final click mechanism.
Final Check
Ensure all drawers operate smoothly.
The diagram shows the completed chest of drawers with drawers open and closed, indicating proper function.
