BIGBIG WON RAINBOW Lite Gaming Controller User Manual
01. Parts Identification
The RAINBOW Lite controller features a comprehensive layout of buttons and ports.
Top View Components:
- RT (Right Trigger)
- RB (Right Bumper)
- RS (Right Analog Stick)
- LS (Left Analog Stick)
- D-pad (Directional Pad)
- HOME Button
- Menu Button
- FN Button
- M1 (Macro/Mapping Button 1)
- M2 (Macro/Mapping Button 2)
- 3.5mm Audio Port
- Type-C Port
- LED1, LED2, LED3, LED4 (Indicator Lights)
- Display Button
- Triangle Button
- A/B/X/Y Buttons
Front View Components:
- LT (Left Trigger)
- LB (Left Bumper)
- LS (Left Analog Stick)
- RS (Right Analog Stick)
- D-pad
- HOME Button
- Menu Button
- FN Button
- M1
- M2
- 3.5mm Audio Port
- Type-C Port
- LED1, LED2, LED3, LED4
- A/B/X/Y Buttons
Packing List:
- Certificate of Conformity * 1
- Instruction Manual * 1
- Rainbow Lite Game Handle * 1
- 1.8m Ultra-light Data Cable * 1
- Support Platform: Win10/11 / Conversion
02. Connection
The RAINBOW Lite is a wired controller. A Type-C cable is required to connect it to the host device.
Mode Switching: The controller supports both Xinput and Switch modes. Ensure you switch to the appropriate mode for your host device:
- PC: Switch to Xinput mode (this is the default).
- Nintendo Switch: Switch to Switch mode.
PC (Steam): For Steam connections, enable "Support XBOX Configuration" within the game's settings: "Settings - Controller - General Controller Settings". Failure to do so may result in the game not recognizing the controller.
Nintendo Switch Console: After connecting to the Switch, navigate to "Settings - Controller & Sensors - Pro Controller Wired Communication" and enable it.
03. Mode Switching
The controller supports both Xinput and Switch modes. Switch to the corresponding mode after connecting for normal operation.
- To switch to Switch Mode: Press and hold the A + HOME buttons for 3 seconds. The mode indicator will turn RED.
- To switch to Xinput Mode: Press and hold the B + HOME buttons for 3 seconds. The mode indicator will turn GREEN.
04. Light Effects
The controller features various lighting effects. These can be cycled through or turned off by double-clicking the FN button.
05. Button Mapping
The controller has two expandable buttons (M1 and M2) that support button mapping.
To set button mapping:
- Press and hold (M1/M2) + FN. The mode indicator will breathe GREEN, indicating entry into mapping setup mode.
- Press the front button you wish to assign to M1/M2. The mode indicator will flash GREEN twice to confirm successful mapping.
To clear button mapping:
- Press and hold the button (M1/M2) whose mapping you want to clear.
- Double-click the FN button. The mode indicator will flash GREEN twice, indicating the mapping has been cleared.
06. Turbo Function
This controller supports the Turbo function for the following buttons: A/B/X/Y, LT/RT, LB/RB (a total of 8 buttons).
To set Turbo:
- Press and hold FN + [Button to be set]. The mode indicator will flash ORANGE, indicating success.
To clear Turbo:
- Press and hold the button to be cleared for Turbo.
- Double-click the FN button. The mode indicator will flash ORANGE twice, indicating the Turbo setting has been cleared.
Turbo Frequency Adjustment: Press and hold FN + [+] to cycle through three frequencies: 5/5, 10/5, and 20/5. The default frequency is 5/5.
07. Macro Recording
This controller supports macro recording functionality. Each macro set must be linked to a back button (M1/M2) as the trigger.
Recordable Buttons: A/B/X/Y, D-pad, LT/RT/LB/RB, RS/LS, and the 8-way rocker.
To record a macro:
- Press and hold (M1/M2) + FN for 3 seconds. The mode indicator will breathe RED, indicating entry into macro recording mode.
- Press the controller buttons you wish to record.
- Click the FN button when recording is complete. The mode indicator will flash RED twice to confirm the recording.
To clear a macro:
- Press and hold the button (M1/M2) whose macro you want to clear.
- Double-click the FN button. The mode indicator will flash RED twice, indicating the macro setting has been cleared.
08. Stick Dead Zone Switching
Users requiring a 0 dead zone can switch between dead zone ranges of 0/10 for the left and right analog sticks by pressing FN + Left Stick Down (LS) and FN + Right Stick Down (RS) respectively.
Note: A 0 dead zone provides greater control precision but may lead to stick drift in games if not properly managed.
09. Quick Trigger
This controller supports Quick Trigger settings, designed to improve rapid clicking for linear triggers. When Quick Trigger is enabled, the trigger activates at any point of its press and can be re-pressed without needing to be fully released to its original position, maximizing rapid-fire potential.
To enable/disable Quick Trigger:
- Press and hold the Triangle Button + Trigger (LT/RT). The mode indicator will flash BLUE, indicating the Quick Trigger setting has been successfully enabled for that trigger.
- Press and hold the Triangle Button + Trigger (LT/RT) again. The mode indicator will flash BLUE again, indicating the Quick Trigger setting has been successfully disabled for that trigger.
10. Stick and Trigger Calibration
If you experience significant stick drift, cannot reach the maximum value when pushing the stick, or if a trigger automatically outputs a value without being pressed, you can calibrate the analog sticks and triggers.
Calibration Procedure:
- Press and hold the View Button + Menu Button for 3 seconds. All four LEDs will breathe slowly.
- Push the analog sticks to their maximum extents and rotate them in full circles 3-5 times.
- Press the LT/RT triggers to their maximum extent and release them, repeating this 3-5 times.
- Finally, press the View Button + Menu Button simultaneously. The LEDs will flash twice and then turn off, indicating that calibration is complete.
11. Screenshot
This controller supports one-touch screenshots. In both Xinput and Switch modes, the Triangle Button functions as the screenshot button.
On PC, screenshot files are saved in "This PC - Pictures - Screenshots".
12. Audio
This controller supports audio input and output. After connecting to the host, plug your headset with a microphone into the 3.5mm audio port located at the bottom of the controller.
Volume can also be adjusted using the FN + [Up Arrow] / [Down Arrow] key combination (this function is supported on PC only).
13. Vibration Adjustment
The controller supports four levels of vibration adjustment. Press FN + [+] or FN + [-] to cycle through vibration levels for the trigger motors: Strong, Medium, Weak, and Off.
14. One-Touch Configuration Reset
Press and hold the HOME button for 10 seconds until the controller vibrates. This indicates that the controller's configuration has been successfully reset.
15. Detailed Operation Instructions
For detailed tutorial videos, please visit the official BIGBIG WON website support page:https://www.bigbigwon.com/support
16. Warranty and Support
BIGBIG WON offers a 12-month limited warranty from the date of purchase.
For free online technical support, please contact the official BIGBIG WON WeChat account.
Tutorial videos, upgrade tools, and e-manuals are available at:www.bigbigwon.com/support
BIGBIG WON SUPPORT is here to provide assistance for your BIGBIG WON products.
