BIGBIG WON RAINBOW 2 Pro Controller

01. Name of Each Part

The BIGBIG WON RAINBOW 2 Pro controller features the following components:

• Left Joystick (LS)
• D-pad
• Left Light Strip
• TURBO Button
• Mapping Button
• [FN Key]
• [M1 Button]
• [M2 Button]
• [M3 Button]
• [M4 Button]
• [HOME Button]
• [View Button]
• [Menu Button]
• [Screenshot Button]
• [LB Button]
• [LT Button]
• [Left Trigger]
• [RB Button]
• [RT Button]
• [Right Trigger]
• A/B/X/Y Buttons
• Right Joystick (RS)
• Right Light Strip
• Configuration Button
• MACRO Button
• Pair Key
• 3.5mm Headphone Jack
• USB Type-C Cable Port

02. BIGBIG WON ELITE APP

The controller supports real-time customization and quick settings via the BIGBIG WON ELITE APP. Users can fine-tune RGB lighting, motion control, joysticks, triggers, buttons, and macros. The app offers richer functions and clearer visual operations compared to on-controller quick settings. It allows storing multiple controller configurations and generating a configuration list for instant application. Note: Using app customization and then switching to quick settings may alter configurations. The app will read the controller's current configuration upon next launch, creating an "unnamed" configuration.

03. Turn On/Off

Press and hold the [HOME Button] for 3 seconds to turn the controller on or off.

04. Connection

The controller supports three connection methods: 2.4G, Bluetooth, and wired.

2.4G Connection:

The 2.4G receiver and controller are pre-paired. After turning on the controller, insert the 2.4G receiver into the host to connect. If pairing fails:

1. Insert the receiver into the host and press/hold the receiver's button until its indicator light flashes quickly, indicating pairing mode.
2. Turn on the controller and press/hold the Pair Key on top for 3 seconds. The [HOME Button] light will flash quickly, indicating pairing mode.
3. Wait for the receiver and controller [HOME Button] lights to become solid, signifying successful pairing.

Bluetooth Connection:

After turning on the controller, press the Pairing Button on top for 3 seconds. The [HOME Button] indicator will flash quickly, indicating pairing status. The indicator becomes solid upon successful connection. (In Switch mode, the channel indicator light sequence depends on the controller's order on the console.)

Wired Connection:

Turn on the controller and connect it to the console using a USB Type-C cable.

Note: The controller is compatible with Switch and Xinput modes. After connecting to a console, switch to the corresponding mode. Xinput is the default mode.

Steam:

To connect with Steam, enable "Xbox Configuration Support" in Steam's "Settings - Controller - GENERAL CONTROLLER SETTINGS". Otherwise, the controller may not be recognized in games.

Switch:

When connecting to a Switch via wired connection, enable "System Settings – Controller and Sensors – Pro Controller Wired Communication".

05. Mode Switch

The controller is compatible with Switch and Xinput modes. Switch to the appropriate mode for use:

• Switch Mode: Press and hold [A Button] + [HOME Button] for 3 seconds. The [HOME Button] light turns red, indicating Switch mode.
• Xinput Mode: Press and hold [B Button] + [HOME Button] for 3 seconds. The [HOME Button] light turns green, indicating Xinput mode.

Notice: For connecting to iOS and Android mobile devices via Bluetooth, ensure the controller is in Xinput mode.

06. Description of Light Strip

A stroke optical fiber is integrated under the transparent shell. The color and effects of the left and right light strips can be customized via the APP. Effects include gradual change, breathing, and flashing.

1. Double-click the [FN Key] to cycle through "Mode light effect", "Customize light effect", and "Off".
2. The default is "Mode light effect". In this mode, the light strip color matches the [HOME Button] light: red for Switch mode, green for Xinput mode.
3. The light strip also supports custom effects via the APP. When customizing in the APP, it automatically switches to "Customize light effect" mode.

07. Remap

The controller features four remappable additional buttons (M1/M2/M3/M4) with key mapping capabilities.

Set Key Mapping:

Press the [FN Key] + one of the [M1/M2/M3/M4 Buttons]. The FN indicator will show a breathing status, indicating key mapping mode. Then, press the target button to map. The FN indicator will flicker twice upon successful mapping.

Clear Single Key Mapping:

Hold the button to be cleared (M1/M2/M3/M4) and double-click the [FN Key]. The FN indicator will flash twice, confirming the mapping is cleared.

Clear All Key Mapping:

Double-click the [FN Key]. The FN indicator will flash twice, confirming all mappings are cleared.

APP:

Quick settings allow mapping controller keys only to the back buttons (M1/M2/M3/M4). The ELITE APP enables modification of all controller button values.

08. Turbo

The controller supports turbo functionality for A/B/X/Y, D-pad directions ([Up Arrow]/[Down Arrow]/[Left Arrow]/[Right Arrow]), LB/RB/LT/RT, and M1/M2/M3/M4 buttons.

Set TURBO:

Hold the [FN Key] + the "target key". The FN indicator flickers twice, confirming the function is enabled. (When TURBO is active, the FN indicator flickers at the current turbo frequency.)

Clear Single TURBO:

Hold the "target button" and double-click the [FN Key]. The FN indicator flickers twice, confirming the function is disabled.

Clear All TURBO:

Double-click the [FN Key]. The FN indicator flickers twice, confirming the function is disabled for all buttons.

TURBO Frequency:

Press [FN Key] + [Left Arrow] to cycle through three frequencies: 5Hz, 10Hz, and 20Hz. The default is 5Hz.

APP:

The ELITE APP allows setting TURBO for all controller buttons.

09. Macro Recording

The controller supports MACRO recording, where each MACRO must be bound to a back key (M1/M2/M3/M4) as a trigger. Supported keys for MACRO recording include A/B/X/Y, D-pad directions ([Up Arrow]/[Down Arrow]/[Left Arrow]/[Right Arrow]), LB/RB/LT/RT, Left Joystick (LS), Right Joystick (RS), and the joysticks themselves.

Record MACRO:

Hold the [FN Key] + [M1/M2/M3/M4 Button] for 3 seconds. The FN indicator enters a breathing status, indicating MACRO recording. Press any key to record, then click the key again after recording is finished. The FN indicator flickers twice upon completion. (While MACRO is operating, the FN indicator flashes slowly until the MACRO operation is complete.)

Clear Single MACRO:

Press the "target key" (M1/M2/M3/M4) and double-click the [FN Key]. The FN indicator flickers twice, confirming the MACRO is cleared.

Clear All MACRO:

Double-click the [FN Key]. The FN indicator flickers twice, confirming all MACRO functions are disabled.

APP:

Quick settings offer approximate MACRO recording. The ELITE APP allows detailed MACRO editing, including step duration and interval times, and can store multiple MACROs in a library for instant selection.

10. Simulated Motion Control

This controller supports simulated motion control using its built-in gyroscope to mimic joystick operations. There are three modes:

• Global Left Joystick Motion Control: Hold [FN Key] + Press Left Stick (LS).
• Global Right Joystick Motion Control: Hold [FN Key] + Press Right Stick (RS).
• Response Right Joystick Motion Control: Hold [FN Key] + Trigger Button + Press Right Stick (RS).

APP: Quick settings only allow turning motion control on/off. For better performance, use the APP customization. Simulated motion control requires the APP.

Note: Nintendo Switch supports native motion control; avoid enabling simulated motion control for a better experience on Switch.

11. Onboard Configuration

The controller can store multiple configurations onboard.

Switch Mode:

Click the Configuration Button. The channel indicator changes from red to white, entering configuration switch mode. Four indicators show four different onboard configurations. Click the Configuration Button again to cycle through configurations, indicated by lights switching from top to bottom. If no action is taken for 5 seconds, it exits mode, and the indicator returns to red (channel indicator).

Xinput Mode:

In Xinput mode, there is no channel indication; the indicator light is white by default, showing the current onboard configuration. Clicking the Configuration Button directly switches configurations.

Reset Configuration:

Press and hold the Configuration Switch Button for 3 seconds to clear all settings of the current configuration.

12. Rocker Dead Zone

A default joystick dead zone is set at the factory. Users can adjust the central dead zone for the left and right joysticks separately via the APP.

Note: A 0 dead zone offers higher control accuracy but may lead to in-game drift.

13. Joysticks & Triggers Calibration

If joysticks drift severely, cannot reach maximum input, or triggers send automatic key values or fail to reach maximum linear value, calibration is recommended:

1. Press and hold the [View Button] and [Menu Button] simultaneously for 3 seconds. The light strip turns orange and breathes slowly.
2. Push the joysticks to their maximum range, rotating them at a constant speed. Repeat 3-5 times.
3. Press the [LT Button] / [RT Button] to their maximum and release. Repeat 3-5 times.
4. Finally, press and hold the [View Button] and [Menu Button] simultaneously. The light strip will double flash orange, indicating calibration completion.

14. Gyroscope Calibration

Place the controller on a horizontal table. Press the [Menu Button] and [Screenshot Button] simultaneously. The light strip will turn purple and breathe slowly until it double flashes purple, indicating calibration is completed.

15. Audio

The controller supports audio input/output. When connected via wired or 2.4G mode, plug an earphone with a microphone into the 3.5mm audio port at the bottom of the controller.

Press [FN Key] + [Up Arrow] / [Down Arrow] to adjust volume on PC platforms.

16. Vibration Adjustment

The controller offers four levels of vibration adjustment.

Press [FN Key] + [Right Arrow] to cycle through vibration levels for the trigger motor: Strong, Medium, Weak, and Off.

17. Battery Instructions

Low Battery: When the battery is critically low, the light strips on both sides will flash red twice per second for 10 times, with a reminder every five minutes.

Charging: When connected to power, the light strip will show a red breathing effect during charging. It returns to its original state when charging is complete.

Charging Stand: The stand has no light indication in standby. When the controller is connected to the stand, its lights turn on to indicate charging. A solid green light means the controller battery is full.

18. Detailed Functional Operation Instructions

For more detailed instructions, please visit the BIGBIG WON Official Website > Support: https://www.bigbigwon.com/support/

19. Your Rights

This product comes with a 12-month limited warranty from the date of purchase.

Welcome to the BIGBIGWON Community

The BIGBIG WON community connects gamers seeking a competitive edge. Join the Discord server and follow social channels for the latest offerings, event coverage, and opportunities to win BIGBIG WON hardware.

Follow us: @BIGBIG WON

Join us: BIGBIG WON DISCORD