Bobtot Triangle Outdoor Portable Wireless Speaker

Quick Start Guide

Device Overview

The speaker features a charging port, two indicator lights, a microphone, a power/TWS pairing button, volume down/previous button, volume up/next button, and a play/pause/answer button.

Buttons and Ports:

Power/TWS: Long press to turn the speaker on/off. Double click to initiate TWS pairing, connect, or disconnect two speakers.
Volume Down/Previous Button: Short press to decrease volume. Long press to go to the previous song.
Volume Up/Next Button: Short press to increase volume. Long press to go to the next song.
Mode/Play/Pause: Short press to pause or play music. Short press to accept an incoming call. Long press to reject an incoming call. Long press for 2 seconds to disconnect Bluetooth. Double click to redial the last number.

Charging Your Device

Connect the included USB Type-C cable to the speaker's charging port and the other end to a power adapter (not included). Allow approximately 2.5 hours for a full charge. The indicator light is red while charging and turns off when fully charged. It is recommended to use a USB wall adapter with a DC 5V=1A output.

The charging port is a USB Type-C port.

Initial Setup

Once the speaker is fully charged, press and hold the Power button until a voice prompt indicates the device has entered Bluetooth pairing mode.
On your smartphone or tablet, search for the Bluetooth device named "Triangle" and tap to connect.
A prompt will play once pairing is successful.

Note:

If the speaker is turned on but not connected, it will automatically shut down after 10 minutes.
If the speaker is connected but no playback is occurring, it will automatically shut down after 20 minutes.

TWS Sync Mode

To use TWS (True Wireless Stereo) mode with two speakers:

Long press the Power button for approximately 2 seconds on both speakers to turn them on. The blue indicator lights will flash.
Quickly double-click the Power button on one speaker. A prompt sound "connected" will indicate the speakers have entered pairing mode, and the indicator light of one speaker will turn solid blue.
On your smartphone or tablet, search for the Bluetooth device named "Triangle" and connect it. You should hear the "connected" sound again, indicating successful connection. You can now enjoy music with both speakers simultaneously.

Notes:

In TWS Mode, turning off one speaker will turn off both.
Double-clicking the Power button will disconnect the TWS connection.

	Bobtot Triangle Portable Wireless Speaker Quick Start Guide A quick start guide for the Bobtot Triangle Outdoor Portable Wireless Speaker, covering setup, features, TWS pairing, and specifications.
	Bobtot SoundAir Portable Wireless Speaker Quick Start Guide Get started with your Bobtot SoundAir portable wireless speaker. This guide covers setup, Bluetooth pairing, TWS mode, charging, specifications, and customer support.
	Bobtot Triangle Portable Speaker Model Difference - ET2240A, ET2240B Letter of Model Difference for the Bobtot Triangle Portable Speaker, models ET2240A and ET2240B, FCC ID 2AZ43-ET2240A. Details two appearances with unchanged circuitry and RF chip.
	Confidentiality Request for Triangle Portable Speaker by Bobtot Official request for confidentiality under sections 0.457 and 0.459 of CFR 47 for the Triangle Portable Speaker, model ET2240A and ET2240B, FCC ID 2AZ43-ET2240A, trademarked Bobtot. This document outlines the need to withhold Block Diagram, Schematics, and Operational Description from public review due to proprietary information.
	Bobtot Cutie Portable Wireless Speaker Quick Start Guide This guide provides instructions for setting up, using, and troubleshooting the Bobtot Cutie portable wireless speaker. Learn about charging, Bluetooth pairing, button functions, and customer support.
	Bobtot SoundAir Portable Wireless Speaker - Quick Start Guide Get started with your Bobtot SoundAir portable wireless speaker. This guide covers setup, pairing, TWS mode, charging, specifications, and customer support.
	Bobtot SoundAir1 Portable Wireless Speaker - Quick Start Guide Get started with your Bobtot SoundAir1 portable wireless speaker. This guide covers setup, charging, Bluetooth pairing, TWS mode, and specifications for this IPX6 water-resistant speaker.
	Bobtot ET29 Portable Speaker with Microphone User Manual Comprehensive user manual for the Bobtot ET29 portable wireless speaker with microphone, covering setup, features, specifications, and customer support.

Device Overview

Charging Your Device

Initial Setup

TWS Sync Mode

Related Documents