Bobtot ET29 Portable Speaker with Microphone

Folding size: 120x68mm

Packing List

The package includes the following items:

• Bobtot Portable Wireless Speaker
• User Manual
• 3.5mm Audio Cable
• Type-c Charging Cable
• Microphone

[Visual description: The packing list section shows the Bobtot portable wireless speaker along with its accessories: a user manual, a 3.5mm audio cable, a Type-C charging cable, and a microphone.]

How To Use The Speaker

Wireless BT Connection

Short press the Power button. The speaker enters BT mode, indicated by a rapidly flashing blue light on the power button icon. Search for your Bluetooth device named "Bobtot ET29" and tap to connect. To switch to BT mode again, double-click the Power button to play music.

TF Card / U Disk / Aux-in Mode

Insert a TF card or U disk into the respective slot. The Bobtot ET29 portable speaker will automatically play music. The maximum capacity supported for TF cards or U disks is 64GB.

Connect any audio device using a 3.5mm audio cable for playback.

Charging (Type-C)

Insert one end of the charging cable into the USB Type-C port on the speaker and connect the other end to a charging device. The speaker will automatically enter charging mode.

Button Functions

The speaker features the following buttons:

1. Power Indicator
2. Volume down / Previous song
3. Karaoke mode switch & Light on/off
4. Play/pause
5. EQ mode
6. Power
7. Volume up / Next song
8. Type-c Slot (charge only)
9. TF card Slot
10. AUX Slot (3.5mm Audio jack)
11. USB Slot
12. RST (Reset Slot)

Button Function Description

How to Use Microphone

Turn On/Off

When the ET29 speaker is on, press the microphone button for 2 seconds to turn it on. The indicator light turns green, indicating it is automatically connected to the ET29 speaker. You can now sing.

Press the button for 2 seconds to turn it off.

Volume Up/Down

Short press the microphone -/+ buttons to reduce/increase the microphone volume.

Adjust the Mode

While singing, short press the button on the ET29 speaker to switch between karaoke mode, vocal mode, and KTV mode for different sound effects.

Charging

Plug the USB Type-C cable into the microphone's charging port. The indicator light will be red. The red light turns off when the microphone is fully charged. Full charge takes approximately 1-2 hours.

Note: The ideal distance between the microphone and the ET29 speaker is 10 meters.

Specifications

Speaker Specifications

Microphone Specifications

Kindly Reminder

• Keep the microphone at least 20cm away from the speaker.
• Check charger specifications before charging; do not use fast charging or high voltage chargers.
• For hearing health, avoid using at maximum volume for extended periods.
• Do not use near fire sources or in high-temperature environments to prevent permanent damage.
• Use strictly according to instructions; do not modify or disassemble the product without permission.
• Avoid dropping, impacting, knocking, or squeezing the product, as this can affect its structure, strength, and reliability.
• If high temperature, deformation, corrosion, or other abnormalities occur during use, stop immediately and contact the merchant for proper disposal.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Customer Care Guide

Bobtot is committed to providing exceptional customer care. Building strong relationships with customers is essential to our business success.

Time

Inquiries will be responded to within 24 hours.

Feedback

Customer feedback is highly valued. Customers are encouraged to share their thoughts and ideas.

Solutions

Efforts will be made to find quick and efficient solutions for any issues encountered by customers.

For any questions or concerns, please reach out:

Call or Message: +1 888 572 1718

Email: service@bobtot.net

Website: bobtot.net

© 2023 BOBTOT // Features and specifications are subject to change and/or improvement without notice.

Technical Requirements & Manufacturing Information

Finished product size: 120*68mm

Paper: 128g coated paper

Fold: Accordion fold

Printing: Black monochrome printing