Product Overview
The Altronix Trove1 enclosure is designed to house Altronix backplanes, accommodating various combinations of access controllers and accessories from leading manufacturers. It can be used with or without Altronix power supplies and accessories. The Trove system simplifies board layout and wire management, aiming to reduce installation time and labor costs.
Revision: 09092022
Specifications
Features
- 16 Gauge powder coated steel construction.
- Convenient knockout configuration:
- One (1) single knockout: 1.948" (1-1/2" Conduit)
- Nine (9) double knockouts: 1.362" (1" Conduit) / 1.115" (3/4" Conduit)
- Includes cam lock, tamper switch, and mounting hardware.
Agency Listings
- UL: UL 294 Access Control Unit Accessory Enclosure
- cUL: cUL Listed For CSA Standard C22.2 No.205-M1983, Signal Equipment
- CE: European Conformity
Capacity
Accommodates up to two (2) 12VDC/7AH batteries.
Physical and Environmental
- Dimensions (Enclosure H x W x D): 18.0" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.5mm)
- Dimensions (Shipping H x W x D): 21.75" x 18.25" x 5.75" (553mm x 464mm x 146mm)
- Weight (approximate):
- Product: 11.8 lb. (5.35 kg)
- Shipping: 15.5 lb. (6.83 kg)
Accessories (order separately)
Magnetic Cable Tie Mounts
Models: WM5, WM25, WM100
Altronix WM5, WM25, and WM100 are packs containing 5, 25, or 100 magnetic cable tie mounts, respectively. They are designed to accommodate standard zip ties or velcro straps and are ideal for wire management within the Trove series enclosures.
[Image Description: A set of three circular magnetic mounts with slots designed to hold standard zip ties or velcro straps, ideal for wire management. They are shown in various metallic finishes.]
Magnetic Mounting Solution
Models: MM4, MM8, MM12, MM24
Altronix mounting magnets accommodate screws and nylon standoffs, allowing for the mounting of various boards and accessories in any metal enclosure or backplane.
[Image Description: A small, round magnetic component with holes for screws and nylon standoffs, used for mounting boards or accessories within enclosures.]
Optional Backplanes
The Trove1 enclosure is compatible with a range of backplanes from various manufacturers, listed below:
| Backplane Model | Backplane with Enclosure Model | Manufacturer | Dimensions (H x W x D) |
|---|---|---|---|
| TBV1 | TROVE1BV1 | Brivo | 16.625" x 12.5" x 0.3125" (422.3mm x 317.5mm x 8mm) |
| TC1 | TROVE1C1 | CDVI | |
| TDM1 | TROVE1PH1 | Openpath | |
| TDR1 | TROVE1DM1 | DMP Wiegand | |
| THC1 | TROVE1DR1 | DIN Rail | |
| TLU1 | TROVE1HC1 | Hartmann | |
| TM1 | TROVELU1 | Kisi | |
| TPD1 | TROVE1M1 | Mercury | |
| TSA1 | TROVE1PD1 | PDK | |
| TSF1 | TROVE1SA1 | Salto | |
| TSP1 | TROVE1SF1 | Swiftlane | |
| TV1 | TROVE1SP1 | Suprema | |
| TROVE1V1 | HID Vertx / HID Aero |
Dimensions and Drawing
The Trove1 enclosure has the following approximate dimensions:
- Height: 18.0" (457.2mm)
- Width: 14.5" (368.3mm)
- Depth: 4.625" (117.5mm)
[Image Description: A technical drawing illustrating the dimensions and knockout locations of the Altronix Trove1 enclosure. It includes front, side, and top views with measurements for height (18.0 inches / 457.2mm), width (14.5 inches / 368.3mm), and depth (4.625 inches / 117.5mm). Key knockout sizes are detailed, including a single 1.948-inch (1-1/2" Conduit) knockout and nine double knockouts measuring 1.362-inch (1" Conduit) and 1.115-inch (3/4" Conduit). The drawing shows the placement of knockouts for conduit entry and mounting points.]
