Altronix Trove2KA2 / TKA2: Access & Power Integration Solution for Keyscan
An integrated enclosure and backplane system designed to simplify the installation of Keyscan access control systems with Altronix power solutions.
Overview
The Altronix Trove™ Trove2KA2 enclosure and TKA2 backplane provide a streamlined solution for integrating Altronix power components with Keyscan access controllers and accessories. This system simplifies board layout and wire management, significantly reducing installation time and labor costs.
A photograph shows the Altronix Trove2KA2 enclosure, a large, dark-colored metal cabinet, open to reveal the TKA2 backplane mounted inside. The backplane is populated with connectors and mounting points. The image highlights the integrated nature of the enclosure and backplane for access control systems.
Trove2KA2 (Enclosure + TKA2 Backplane) Features
- Accommodates the following Keyscan controllers with or without Altronix power/accessories:
- Keyscan controllers: CA250B, CA4500B, or CA8500B
- Up to two (2) OCB8 units
- One (1) of each DPS15 and CIM
- Accommodates Altronix Power Supplies and Sub-Assemblies
- Accommodates Altronix T16100 Transformer
- Includes the Altronix Trove2 enclosure and one (1) removable TKA2 backplane
TKA2 (Backplane) Features
- Simplifies board layout and wire management.
- Convenient knockout configuration:
- One (1) single knockout: 2.415” (2" Conduit)
- Sixteen (16) double knockouts: 1.362" (1" Conduit) / 1.115" (3/4" Conduit)
- Accommodates up to four (4) 12VDC/12AH batteries.
- Constructed from 16 Gauge powder coated steel.
- Includes cam lock, tamper switch, and mounting hardware.
Agency Listings
- UL: UL294 - Access Control System
- cUL: CAN/ULC - s319-05 - Electronic Access Control Systems
- CE: European Conformity
Physical and Environmental Specifications
Trove2KA2 - Dimensions (H x W x D)
- Enclosure: 27.25” x 21.5" x 6.5" (692mm x 546mm x 165mm)
- Shipping: 32.5" x 26.5" x 11.125” (826mm x 673mm x 283mm)
Trove2KA2 - Weights (approx.)
- Product: 37.1 lb. (16.83 kg)
- Shipping: 40.85 lb. (18.53 kg)
TKA2 - Dimensions (H x W x D)
- Backplane: 25.375" x 19.375" x 0.3125" (645mm x 492mm x 8mm)
- Shipping: 26.5” x 20.5” x 1.25" (673mm x 521mm x 32mm)
TKA2 - Weights (approx.)
- Product: 8.0 lb. (3.63 kg)
- Shipping: 10.0 lb. (4.53 kg)
Access Controller Position Chart
The following chart details the mounting positions on the TKA2 backplane for various Altronix and Keyscan access controller models.
| Altronix / Keyscan | Pem Mounting |
|---|---|
| AL400ULXB2, AL400ULXB2V, AL600ULXB, AL600XB220, AL1012ULXB, AL1012XB220, AL1024ULXB2, AL1024XB2V, eFlow4NB, eFlow4NBV, eFlow6NB, eFlow6NBV, eFlow102NB, eFlow102NBV, eFlow104NB, eFlow104NBV, Tango1B, ACM8, ACM8CB, ACMS8, ACMS8CB, ACMS12, ACMS12CB, LINQ8ACM, LINQ8ACMCB | A |
| ACM4, ACM4CB, LINQ8PD, LINQ8PDCB, MOM5, PD4UL, PD4ULCB, PD8UL, PD8ULCB, PDS8, PDS8CB, PDS16, PDS16CB, VR6 | B |
| T16100 | C |
| Keyscan DPS15 | D |
| Keyscan CA250B, CA4500B, CA8500B | E |
| Keyscan OCB8 | F |
| Keyscan CIM with/without NetCom2P | G |
A diagram illustrates the TKA2 backplane with labeled mounting positions (A through G). Each position corresponds to specific Altronix or Keyscan controller models listed in the accompanying chart, guiding users on where to install different components for optimal layout.
Accessories (order separately)
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25, or 100 magnetic cable tie mounts, respectively. They accommodate standard zip ties or velcro straps and are ideal for wire management in the Trove series.
Image depicts Altronix WM5 magnetic cable tie mounts, showing several small, round magnetic bases with slots for zip ties or velcro straps, designed for wire management.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets accommodate screws and nylon standoffs, allowing for the mounting of various boards/accessories in any metal enclosure or backplane.
Image shows Altronix magnetic mounting solutions, including a round magnet with a threaded post and a nylon standoff, used for attaching boards or accessories to metal surfaces.
BR1 - Sub-Assembly Mounting Bracket
The Altronix BR1 mounting bracket is compatible with Altronix Maximal and Trove enclosures. It allows for mounting one (1) PD4UL(CB), PD8UL(CB), ACM4(CB), MOM5, VR6, PDS8, NetWay5B, or LINQ8PD(CB) sub-assembly on the enclosure's inside wall, saving valuable space.
Image displays the Altronix BR1 Sub-Assembly Mounting Bracket, a metal bracket designed to mount specific Altronix sub-assemblies within Trove enclosures.
TROVE2BWC - Battery/Wire Trough Enclosure
The Altronix Trove2BWC is a dual-purpose enclosure that can be used as a wiring trough or battery cabinet when mounted above or below the Trove2 integrated power and access solution. The knockouts on the Trove2BWC are strategically placed to align with the Trove2, allowing for easy conduit connections between cabinets. The Trove2BWC includes cam locks and 2 tamper switches to ensure access to wiring and batteries is secure.
Two images show the Altronix Trove2BWC dual-purpose enclosure. One is labeled 'with batteries' and shows a compartment suitable for battery storage. The other is labeled 'with wires' and illustrates its use as a wiring trough, highlighting its connectivity to the main Trove enclosure.
Dimensions and Drawing
The Trove2KA2 enclosure has approximate dimensions of 27.25" height x 21.5" width x 6.5" depth (692.2mm x 546.1mm x 165.1mm).
A technical drawing provides detailed dimensions for the Trove2KA2 enclosure. It shows the overall height (27.25 inches / 685.8mm), width (21.50 inches / 546.1mm), and depth (6.5 inches / 165.1mm). The drawing also indicates the precise locations and sizes of various knockouts for conduit entry (e.g., 2.415-inch single, 1.362-inch and 1.115-inch double) and the placement of mounting holes.
