The Altronix Trove1DM1, consisting of the Trove1 enclosure and TDM1 backplane, offers a high-capacity solution for integrating DMP access control systems. This unit efficiently combines Altronix power/accessories with various DMP 734 Wiegand Modules in a streamlined package. The Trove system simplifies board layout and wire management, thereby reducing installation time and labor costs.
(Note: The original document includes a product image of the enclosure with internal components and the Altronix and DMP logos.)
Trove1DM1 (Trove1 Enclosure + TDM1 Backplane) & TDM1 (Backplane) Features
Key Features:
- Accommodates DMP 734 and 734N Wiegand modules, with or without Altronix power/accessories.
- Supports Altronix Power Supplies and Altronix Sub-Assemblies.
- Includes the Altronix Trove1 enclosure and one (1) removable TDM1 backplane.
- Simplifies board layout and wire management.
- Features convenient knockout configurations:
- One (1) single knockout: 1.948" (1-1/2" Conduit).
- Nine (9) double knockouts: 1.362" (1" Conduit) / 1.115" (3/4" Conduit).
- Accommodates up to two (2) 12VDC/7AH batteries.
- Constructed from 16 Gauge powder-coated steel.
- Includes cam lock, tamper switch, and mounting hardware.
Agency Listings
- UL: UL294 - Access Control System.
- cUL: CAN/ULC - s319-05 - Electronic Access Control Systems.
- CE: European Conformity.
Physical and Environmental Specifications
Trove1DM1 - Dimensions (H x W x D):
Component | Dimensions (H x W x D) |
---|---|
Enclosure | 18.0" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.5mm) |
Shipping | 21.75" x 18.25" x 5.75" (553mm x 464mm x 146mm) |
Trove1DM1 - Weights (approx.):
Component | Weight |
---|---|
Product | 15.15 lb. (6.87 kg) |
Shipping | 19.05 lb. (8.64 kg) |
TDM1 - Dimensions (H x W x D):
Component | Dimensions (H x W x D) |
---|---|
Backplane | 16.625" x 12.5" x 0.06" (422.3mm x 317.5mm x 1.5mm) |
Shipping | 18.0" x 13.75" x 1" (457mm x 350mm x 26mm) |
TDM1 - Weights (approx.):
Component | Weight |
---|---|
Product | 3.35 lb. (1.52 kg) |
Shipping | 4.0 lb. (1.81 kg) |
Access Controller Position Chart
This chart details the PEM mounting positions for various Altronix and DMP access control models within the Trove system.
Altronix / DMP Models | PEM Mounting |
---|---|
AL400ULXB2, AL400ULXB2V, AL600ULXB, AL600XB220, AL1012ULXB, AL1012XB220, AL1024ULXB2, AL1024XB2V, eFlow4NB, eFlow4NBV, eFlow6NB, eFlow6NBV, eFlow102NB, eFlow102NBV, eFlow104NB, eFlow104NBV, Tango1B | A |
ACM4, ACM4CB, LINQ8PD, LINQ8PDCB, MOM5, PD4UL, PD4ULCB, PD8UL, PD8ULCB, PDS8, PDS8CB, PDS16, PDS16CB, VR6 | B |
DMP 734 Wiegand Modules | C |
(Note: The original document includes a visual diagram showing the backplane with labeled positions A, B, and C for module placement.)
Accessories
The following accessories are available separately for enhanced wire management and mounting:
Magnetic Cable Tie Mounts (WM5, WM25, WM100)
Altronix WM5, WM25, and WM100 are packs containing 5, 25, or 100 magnetic cable tie mounts, respectively. These mounts accommodate standard zip ties or velcro straps and are ideal for wire management within the Trove series.
(Note: The original document includes an image of WM5 magnetic cable tie mounts.)
Magnetic Mounting Solution (MM4, MM8, MM12, MM24)
Altronix mounting magnets are designed to accommodate screws and nylon standoffs, allowing for the mounting of various boards and accessories in any metal enclosure or backplane.
(Note: The original document includes an image of a mounting magnet.)
Dimensions and Drawing
Enclosure Dimensions (H x W x D approximate): 18.0" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.5mm)
(Note: The original document provides a detailed diagram illustrating the enclosure's dimensions and knockout locations. Key features depicted include:
- Overall height: 18.0" (457.2mm)
- Overall width: 14.5" (368.3mm)
- Overall depth: 4.625" (117.5mm)
- Knockout layout:
- Top edge: A 7.25" (184.2mm) section with a 1.45" (36.8mm) knockout centered, and a 1.95" (49.5mm) knockout to the right.
- Left side: A 1.5" (38.1mm) knockout at the top, a 0.57" (14.5mm) knockout below it, and a 6.5" (165.1mm) knockout at the bottom.
- Right side: A 1.5" (38.1mm) knockout at the top, a 0.6" (15.2mm) knockout below it, and a 6.5" (165.1mm) knockout at the bottom.
- Bottom edge: Two 4.5" (114.3mm) sections. The left has a 1.25" (31.8mm) knockout. The right has a 2.75" (69.9mm) section containing a 1.115" (28.3mm) knockout and a 1.36" (34.5mm) knockout.
- The main body of the backplane features multiple mounting holes and two 0.6" (15.2mm) knockouts.
The diagram also indicates specific measurements for various cutouts and mounting points.)