Altronix Trove1SA1 / TSA1

Introduction

The Altronix Trove1SA1 is a high-capacity enclosure featuring a removable backplane (TSA1). This integrated solution combines Altronix power supplies and accessories with various SALTO CU42E0 controllers. The Trove system is designed to streamline board layout and wire management, thereby reducing installation time and labor costs.

An image shows the Altronix Trove1SA1 enclosure, a black metal cabinet with the Altronix and Trove logos, and the SALTO logo inside. The text 'Boards are not included' is also visible.

Features

• Accommodates SALTO boards (CU42E0, CU4EB8, CU4200) with or without Altronix power supplies/sub-assemblies.
• Includes the Altronix Trove1 enclosure and one (1) removable TSA1 backplane.
• Simplifies board layout and wire management.
• Convenient knockout configuration: One (1) single knockout (1.948" / 1-1/2" Conduit) and Nine (9) double knockouts (1.362" / 1" Conduit / 1.115" / 3/4" Conduit).
• Accommodates up to two (2) 12VDC/7AH batteries.
• Constructed from 16 Gauge powder coated steel.
• Includes cam lock, tamper switch, and mounting hardware.

Agency Listings

• UL: UL294 - Access Control System.
• cUL: CAN/ULC - s319-05 - Electronic Access Control Systems.
• CE: European Conformity.

Physical and Environmental

Access Controller Position Chart

The Access Controller Position Chart visually maps compatible Altronix and SALTO controllers to specific mounting locations (A, B, C) on the TSA1 backplane. The diagram shows a layout with a central area 'A', two areas 'B' above and below 'A', and two areas 'C' to the left and right of 'A'. The following controllers are assigned to these positions:

• Mounting A: AL400ULXB2, AL400ULXB2V, AL600ULXB, AL600XB220, AL1012ULXB, AL1012XB220, AL1024ULXB2, AL1024XB2V, eFlow4NB, eFlow4NBV, eFlow6NB, eFlow6NBV, eFlow102NB, eFlow102NBV, eFlow104NB, eFlow104NBV, Tango1B
• Mounting B: ACM4, ACM4CB, LINQ8PD, LINQ8PDCB, MOM5, PD4UL, PD4ULCB, PD8UL, PD8ULCB, PDS8, PDS8CB, PDS16, PDS16CB, VR6
• Mounting C: CU42E0, CU4EB8, CU4200

Accessories (order separately)

Optional accessories are available to enhance wire management and mounting:

• WM Series (WM5, WM25, WM100): Magnetic Cable Tie Mounts
  These mounts are available in packs of 5, 25, or 100 and accommodate standard zip ties or velcro straps. They are ideal for wire management within the Trove series enclosures. Images show the WM series mounts as small, circular magnetic bases with slots for zip ties or velcro straps.
• MM Series (MM4, MM8, MM12, MM24): Magnetic Mounting Solution
  Altronix mounting magnets are designed to accommodate screws and nylon standoffs, enabling the mounting of various boards and accessories within any metal enclosure or backplane. An image shows the MM series magnetic mounting solution, featuring a magnetic base with threaded posts for attaching boards or accessories.

Dimensions and Drawing

The enclosure's dimensions are approximately 18.0" (Height) x 14.5" (Width) x 4.625" (Depth). The detailed drawing provides precise measurements for mounting and conduit entry. Key dimensions include:

• Overall Height: 18.0" (457.2mm)
• Overall Width: 14.5" (321.3mm)
• Overall Depth: 4.625" (117.5mm)

Knockout configurations are detailed, including one single knockout (1.948" / 49.5mm diameter) and nine double knockouts (1.362" / 34.5mm and 1.115" / 28.3mm diameters). Additional mounting hole dimensions and clearances are also specified in the drawing.