Altronix Trove2BL2 (Enclosure & Backplane) / TBL2 (Backplane)
Access & Power Integration Solutions
The Altronix Trove2BL2/TBL2 system enables seamless integration of Altronix power and accessories with equipment from any manufacturer. These models offer flexibility, allowing users to utilize Altronix mounting magnets (MM4, MM8, MM12, MM24 – sold separately) to avoid drilling, or to drill custom mounting holes for access controller boards, power supplies, and other accessories. The Trove system simplifies board layout and wire management, thereby reducing installation time and labor costs.
Document Revision: 05092023
Trove2BL2 (Trove2 Enclosure + TBL2 Backplane) Features
- Accommodates boards and equipment from any manufacturer.
- Includes the Altronix Trove2 enclosure and one (1) removable TBL2 backplane.
Features
- Simplifies board layout and wire management.
- Convenient knockout configuration:
- One (1) single knockout: 2.415" (2" Conduit)
- Sixteen (16) double knockouts: 1.362" (1" Conduit) / 1.115" (3/4" Conduit)
- Accommodates up to four (4) 12VDC/12AH batteries.
- Constructed from 16 Gauge powder-coated steel.
- Includes cam lock, tamper switch, and mounting hardware.
Physical and Environmental
Trove2BL2 - Dimensions (H x W x D):
- Enclosure: 27.25" x 21.5" x 6.5" (692mm x 546mm x 165mm)
- Shipping: 32.5" x 26.5" x 11.125" (826mm x 673mm x 283mm)
Trove2BL2 - Weights (approx.):
- Product: 37.1 lb. (16.83 kg)
- Shipping: 40.85 lb. (18.53 kg)
TBL2 - Dimensions (H x W x D):
- Backplane: 25.375" x 19.375" x 0.3125" (645mm x 492mm x 8mm)
- Shipping: 26.5" x 20.5" x 1.25" (673mm x 521mm x 32mm)
TBL2 - Weights (approx.):
- Product: 8.0 lb. (3.63 kg)
- Shipping: 10.0 lb. (4.53 kg)
Agency Listings
- UL: UL294 - Access Control System
- cUL: CAN/ULC - s319-05 - Electronic Access Control Systems
- CE: European Conformity
Accessories (order separately)
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25, or 100 magnetic cable tie mounts, respectively. They accommodate standard zip ties or velcro straps and are ideal for wire management in the Trove series.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets accommodate screws and nylon standoffs, allowing for the mounting of various boards or accessories in any metal enclosure or backplane.
BR1 - Sub-Assembly Mounting Bracket
The Altronix BR1 mounting bracket is compatible with Altronix Maximal and Trove enclosures. It allows mounting of one (1) PD4UL(CB), PD8UL(CB), ACM4(CB), MOM5, VR6, PDS8, NetWay5B, or LINQ8PD(CB) sub-assembly on the enclosure's inside wall, saving valuable space.
TROVE2BWC - Battery/Wire Trough Enclosure
The Altronix Trove2BWC is a dual-purpose enclosure usable as a wiring trough or battery cabinet when mounted above or below the Trove2 integrated power and access solution. Its knockouts are strategically placed to align with the Trove2 for easy conduit connections between cabinets. The Trove2BWC includes cam locks and 2 tamper switches to ensure secure access to wiring and batteries.
Dimensions and Drawing Description
The following describes the technical drawing of the Trove2BL2 enclosure:
Overall Dimensions (H x W x D approximate): 27.25" x 21.5" x 6.5" (692.2mm x 546.1mm x 165.1mm).
Top View Layout: The drawing shows the top surface of the enclosure with various measurements and features indicated.
Width (21.50" / 546.1mm): Marked with sections of 5.25" (133.35mm), 3.5" (88.9mm), 3.5" (88.9mm), and 5.25" (133.35mm) from the edges. Two 2.00" (50.8mm) margins are present on each side.
Height (27" / 685.8mm): Marked with sections from the bottom edge: 1.00" (25.4mm), 6.25" (158.8mm), 1.25" (31.8mm), and 1.5" (38.1mm) from the top edge. Another 1.25" (31.8mm) section is noted near the top left.
Knockouts:
- A single large knockout is located centrally on the top edge, measuring 2.415" (61.3mm) with a label indicating 2" Conduit.
- Multiple smaller knockouts are distributed across the surface. Two are indicated near the top corners, measuring 0.685" (17.4mm) and 1.125" (28.3mm). Another set of measurements indicates 0.5625" (14.3mm) and 1.77" (45mm) related to knockout areas.
- The drawing also indicates specific dimensions for double knockouts: 1.362" (1" Conduit) and 1.115" (3/4" Conduit).
Mounting Holes: Various circular mounting holes are depicted, with dimensions indicating their placement and size, such as 0.85" (21.6mm) and 1.00" (25.4mm) diameter holes, and others with 2.00" (50.8mm) spacing.
Other Features: A perforated area is shown on the left side, measuring 6.25" (158.8mm) x 8.25" (209.5mm). Dimensions for other sections like 6.75" (171.5mm), 8.00" (203.2mm), and 1.25" (31.8mm) are also provided.
