Altronix Trove1DR1 / TDR1: Access & Power Integration Solution for DIN Rail Products
Revision: 05/25/2023
Product Overview
The Altronix Trove1DR1 (Enclosure & Backplane) and TDR1 (Backplane) provide an integrated solution for DIN Rail products. The Trove1DR1 is designed to easily combine Altronix power and sub-assemblies with DIN Rail mountable products such as access controllers, building automation modules, network switches, utility boxes, terminal blocks, and more. Its removable backplane accommodates various lengths of DIN Rail, allowing for vertical or horizontal mounting, suitable for any security or industrial application.
Note: Boards are not included.
Trove1DR1 (Enclosure + TDR1 Backplane) & TDR1 (Backplane) Features
Trove1DR1 / TDR1 Features:
- Accommodates DIN Rail with or without Altronix power supplies/sub-assemblies (e.g., D12).
- Includes the Altronix Trove1 enclosure and one (1) removable TDR1 backplane.
Features:
- Simplifies board layout and wire management.
- Convenient knockout configuration:
- One (1) single knockout: 1.948" (1-1/2" Conduit).
- Nine (9) double knockouts: 1.362" (1" Conduit) / 1.115" (3/4" Conduit).
- Accommodates up to two (2) 12VDC/7AH batteries.
- Constructed from 16 Gauge powder coated steel.
- Includes cam lock, tamper switch, and mounting hardware.
Agency Listings
- UL: UL294 - Access Control System.
- CUL: CAN/ULC - s319-05 - Electronic Access Control Systems.
- CE: European Conformity.
Physical and Environmental Specifications
Trove1DR1 - Dimensions (H x W x D):
- Enclosure: 18.0" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.5mm)
- Shipping: 21.75" x 18.25" x 5.75” (553mm x 464mm x 146mm)
Trove1DR1 - Weights (approx.):
- Product: 15.15 lb. (6.87 kg)
- Shipping: 19.05 lb. (8.64 kg)
TDR1 - Dimensions (H x W x D):
- Backplane: 16.625" x 12.5" x 0.06” (422.3mm x 317.5mm x 1.5mm)
- Shipping: 18.0" x 13.75" x 1" (457mm x 350mm x 26mm)
TDR1 - Weights (approx.):
- Product: 3.35 lb. (1.52 kg)
- Shipping: 4.0 lb. (1.81 kg)
Access Controller Position Chart
This chart details the mounting positions (A, B, C, D) for various Altronix and DIN Rail compatible models within the Trove1DR1/TDR1 system.
| Altronix / DIN Rail | Pem Mounting |
|---|---|
| AL400ULXB2, AL400ULXB2V, AL600ULXB, AL600XB220, AL1012ULXB, AL1012XB220, AL1024ULXB2, AL1024XB2V, eFlow4NB, eFlow4NBV, eFlow6NB, eFlow6NBV, eFlow102NB, eFlow102NBV, eFlow104NB, eFlow104NBV, Tango1B | A |
| ACM4, ACM4CB, LINQ8PD, LINQ8PDCB, MOM5, PD4UL, PD4ULCB, PD8UL, PD8ULCB, PDS8, PDS8CB, PDS16, PDS16CB, VR6 | B, C |
| D12 | C |
| DIN Rail 16" maximum | D |
Diagram Description: The diagram illustrates the backplane with labeled mounting positions A, B, C, and D. Position A is at the top center. Positions B are located symmetrically on the left and right sides, mid-height. Positions C are below positions B, also symmetrically placed. Position D is at the bottom center.
Accessories (order separately)
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs containing 5, 25, or 100 magnetic cable tie mounts, respectively. These mounts accommodate standard zip ties or velcro straps and are ideal for wire management within the Trove series enclosures.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets are designed to accommodate screws and nylon standoffs, enabling the mounting of various boards and accessories within any metal enclosure or backplane.
Dimensions and Drawing
Enclosure Dimensions (H x W x D approximate): 18.0" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.5mm)
Diagram Description: The drawing provides detailed measurements for the enclosure. Key dimensions include overall height (18.0"), width (14.5"), and depth (4.625"). It shows the placement and size of various knockouts: a single 1.948" (1-1/2" Conduit) knockout, nine double knockouts (1.362" for 1" Conduit and 1.115" for 3/4" Conduit), and two 0.6" (15.2mm) knockouts near the bottom. Mounting hole locations are also indicated with precise measurements from edges and other features.
