Birdfy Bamboo Feeder User Manual

Table of Contents

• What's in the Box

• About the Product

• Charging

• Download the Birdfy App

• Assembly

• Outdoor Installation

• Adding Bird Food

• Cleaning

• Maintenance

• Support & Troubleshooting

• Birdfy Community

• Safety & Compliance

What's in the Box

The package includes:

• Feeder

  Illustration of the main bird feeder unit.

• Perch Extension

  Illustration of an extension piece for the perch.

• Camera

  Illustration of the camera unit.

• Quick Start Guide

  Illustration of a booklet labeled 'Quick Start Guide'.

• User Manual

  Illustration of a booklet labeled 'User Manual'.

• Birdfy Solar Panel

  Illustration of the Birdfy solar panel.

• Accessory Box

  Illustration of a box containing accessories.

• Charging Cable

  Illustration of a USB charging cable.

• Mounting Straps (x2)

  Illustration of two hose clamps or mounting straps.

• Mounting Bracket

  Illustration of a mounting bracket with screw holes.

• Screwdriver

  Illustration of a screwdriver.

• Drilling Template

  Illustration of a paper template for drilling holes.

• Black Strap

  Illustration of a black strap, likely for mounting.

*Note: If you purchased a variant without a solar panel, the package will not include the solar panel.

Product Overview

The Birdfy Bamboo Feeder consists of the following parts:

1. Perch
2. Camera
3. Acrylic Panel
4. Seed Compartment Lid
5. Mounting Bracket
6. Charging Cable Port

Additional components:

1. Metal Grille
2. Camera Compartment Cover
3. Status Indicator Light
4. Charging Port
5. Reset Hole
6. Power Button

Diagram showing the Birdfy feeder with numbered parts and a separate view of the back with charging port and status lights.

Important Information Regarding microSD Card

The microSD card slot on the camera is intended solely for manufacturer testing during production. This product does not support storage on a microSD card.

Charging

Fully charge the camera before first use.

For safety reasons, the camera is not fully charged upon packaging. Please use the included charging cable (DC 5V / 1.5A), found in the accessory box, to fully charge the camera before its first use.

Status Indicator Light:

• Solid Yellow: Charging
• Solid Green: Fully Charged
• Solid Blue: Working
• None: Sleep/Off

Temperature Guidelines:

For charging and operation, the ambient and camera temperature should be between 14°F and 113°F (-10°C and 45°C). If the camera has been exposed to low temperatures for an extended period, allow it to return to room temperature before charging.

Download the Birdfy App

Pair your Birdfy device with the app to get started.

Download on the App Store

GET IT ON Google Play

Diagram showing a smartphone connected to the Birdfy feeder, with a checkmark indicating successful pairing.

Bird Identification (AI Feature)

With Lifetime Free AI: If your Birdfy Feeder Bamboo includes lifetime free AI, the AI bird identification feature is included and automatically activated. No further action is needed.

With AI Subscription: If your Birdfy Feeder Bamboo requires an AI subscription, you must log in to my.birdfy.com to use this feature.

Assembly

Install the Perch Extension:

Install the perch extension using the included screws.

Diagram showing the perch extension being attached to the feeder base with screws.

Connect the Solar Panel:

Connect the camera to the solar panel and then place it into the camera compartment. For detailed installation instructions for the solar panel, please refer to its manual.

Diagram showing the solar panel connected to the camera via a cable, and the camera being placed inside the feeder.

Outdoor Installation

A. Mounting on a Pole

Use the included mounting straps or hose clamps to attach the mounting bracket to a pole.

Diagram showing the mounting bracket being attached to a pole using two straps/clamps.

1. Loosen the hose clamp.

2. Wrap the hose clamp around the bracket and the pole.

3. Attach the bracket to the pole.

4. Hang the feeder on the pole.

B. Mounting on a Tree

Use the black strap to attach the mounting bracket to a tree.

Diagram showing the mounting bracket being attached to a tree trunk using a black strap.

1. Thread the strap through the holes in the bracket.

2. Wrap the strap around the tree.

3. Hang the feeder on the tree.

C. Mounting on a Wall

Use the drilling template, screws, and wall anchors to mount the bracket on a wall.

Diagram showing the process of drilling holes using a template, inserting wall anchors, and attaching the mounting bracket to a wall.

1. Use the drilling template and an electric drill (15/64", 6 mm) to drill four holes.

2. Insert the included plastic wall anchors into the holes. Skip this step if mounting on wood. Then, attach the mounting bracket to the wall using screws.

3. Hang the feeder on the wall.

Adding Bird Food

Open the lid and add bird food into the seed compartment.

Diagram showing the feeder lid being opened and bird seed being poured into the compartment.

Cleaning

Follow these steps for cleaning your Birdfy feeder:

1. Open the lid and detach the camera.

2. Remove the internal components.

3. Clean the feeder parts.

4. Rinse thoroughly.

Warning: Bleach must not be used for cleaning.

Maintenance

Seal your Birdfy:

Although made from premium bamboo and specially treated, the natural properties of wood mean we recommend applying a protective coating every six months to extend the life of your Birdfy. This helps protect the wood from the elements.

Support & Troubleshooting

Birdfy is committed to providing high-quality products and services. If you encounter any issues with your Birdfy, please do not hesitate to contact us.

• Email: support@birdfy.com

• Phone: +1 (866) 749-0567 (7:00 AM - 7:00 PM, PTZ)

• In-App Chat

Troubleshooting: Camera Not Working or Not Transmitting

1. Ensure the camera is fully charged.

2. Check your home Wi-Fi connection. Try reconnecting the camera to your Wi-Fi network.

If the problem persists:

1. Disconnect the camera from the solar panel or charger.

2. Use the included release pin or a paperclip to press the reset hole to completely power off the camera.

3. Press and hold the power button for 3 seconds to restart the camera.

Visit the Birdfy Help Center for more assistance.

Birdfy Community

Scan the QR code to join our vibrant Facebook community and connect with fellow bird lovers! Discover valuable insights on bird watching and feeding techniques, share your best Birdfy photos, and admire exotic birds from around the world!

QR code for Birdfy FB Community and social media icons (Facebook, Instagram, TikTok, YouTube).

Safety & Compliance

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications made without explicit approval from the responsible party in compliance may result in the user being unauthorized to operate the device.

This device meets the FCC radiation exposure limits for uncontrolled environments. To ensure safe installation and operation, maintain a minimum distance of 20cm between the radiator and your body.

FCC ID: 2AO8RNI-8401 / 2BC96NI-8441

CE Declaration

Information on the packaging helps identify geographical areas in member states where usage restrictions or authorization requirements may apply. The product's design allows for use in at least one EU member state without violating applicable radio spectrum regulations.

IC Declaration

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

Battery Safety

• Contains batteries; keep away from fire.
• Usable/storage/transport temperature for batteries: 14–113°F (-10–45°C).
• Replacing the battery with an incorrect type may pose a safety risk.
• Disposing of batteries in fire or oven, or crushing/cutting them, may cause an explosion.

CE, FCC, recycling symbols.