Package Contents
The following items are included in the package:
- A CORSAIR VOID PRO RGB Wireless headset
- B Wireless Transmitter (USB)
- C Base station for wireless transmitter (Special Edition models only)
- D Charging cable (USB, 2.0m)
- E Microphone foam windscreen (removable)
- F Quick start guide
Diagram shows: The CORSAIR VOID PRO RGB Wireless headset (A). A USB Wireless Transmitter (B) and its Base Station (C). A USB Charging Cable (D). A removable Microphone Foam Windscreen (E). A booklet labeled "Quick start guide" (F).
Controls and Features
Familiarize yourself with the headset's controls and features:
- A Power button
- B Mute button
- C Jog Dial (controls volume + EQ/Dolby)
- D RGB light (user programmable)
- E Mic LED (indicates mute status)
- F Status LED (indicates RF and Battery status)
- G Charging port
- H Microfiber covered ear pads
- I Headband adjustment
- J Cantilevered arm + hinge (for microphone)
Illustration of the headset with labels pointing to: Power button (A), Mute button (B), Jog Dial (C), RGB light (D), Mic LED (E), Status LED (F), Charging port (G), Microfiber ear pads (H), Headband adjustment mechanism (I), and the Cantilevered microphone arm with hinge (J).
Product Detail: Controls and Wireless Transmitter
Headset Controls
- A Power button
- B Mute button
- C Jog Dial (volume + EQ/Dolby)
- D RGB light (user programmable)
- E Charging port
- F Status LED
Wireless Transmitter
- G Wireless sync LED indicator
- H Pairing button (transmitter paired by default)
Close-up view of headset controls: Power button (A), Mute button (B), Jog Dial (C), RGB light (D), Charging port (E), and Status LED (F). A separate diagram shows the USB Wireless Transmitter and its Base Station, highlighting the Wireless sync LED indicator (G) and the Pairing button (H).
Getting Started
Connect the wireless USB transmitter to any working USB port on your PC or connect the base station (included with Special Edition models), and then attach the wireless transmitter to the base station.
Using the USB extension base station may extend the wireless range of your CORSAIR VOID PRO RGB Wireless Headset, by enabling you to position the antenna for best reception. The headset is designed to operate at a range of up to 40 feet (12m) from the wireless transmitter, but other wireless devices, electronics, and obstructions such as walls may reduce wireless range.
IMPORTANT: The first time you use the CORSAIR VOID PRO RGB Wireless Headset transmitter on a PC, the operating system will automatically install the device driver. After the device driver loads, we recommend you reboot your PC before use.
Status LED Indications:
- Single Blink Red = Connected, Battery Low
- Single Blink Green = Connected, Battery Normal
- Rapid Blink Red = Disconnected, Battery Low
- Rapid Blink Green = Disconnected, Battery Normal
- Solid Amber = Battery Charging
- Solid Green = Battery Charged
- Rapid Blink Amber = Pairing Mode
Charging
Charging 1 (Initial Charge)
IMPORTANT: The CORSAIR VOID PRO RGB Wireless Headset must be fully charged before its first use.
- Connect the USB charging cable to any working USB port on your PC.
- Connect the USB charging cable to the CORSAIR VOID PRO RGB Wireless Headset.
The CORSAIR VOID PRO RGB Wireless Headset battery has no “memory effect", so there is no need to completely discharge it before recharging.
Remember that the USB charging cable requires a high power (USB 2.0 or better) port. Some USB ports found on older devices do not support USB 2.0.
CHARGING WHILE POWER IS OFF: Connect the USB cable when the VOID PRO Headset is OFF and charging. ?
Charging 2 (Play and Charge Mode)
CHARGING WHILE POWER IS ON – “Play and Charge Mode": Connect the USB cable when the VOID PRO Headset is ON and charging. ?
Corsair Utility Engine (CUE) Software
Using the CUE software will enable the full feature set of the CORSAIR VOID PRO RGB Wireless Headset. Note: if the headset is used without software, some features will be disabled.
- Install the software on a PC running Windows 10, Windows 8, or Windows 7.
- After installation is complete, reboot your PC, and launch CUE.
You can use CUE to:
- Choose your RGB color preference and light intensity.
- Select and customize audio equalizer (EQ) settings.
- Adjust headset volume, microphone input volume, and microphone sidetone.
- Set Dolby Headphone 7.1 surround sound on or off.
The software's built-in documentation explains how to use the headset's features in greater detail.
General Tips
For Optimal Wireless Performance:
- Place the wireless adapter in an open, unobstructed area. Special Edition models include a base station for the wireless transmitter, which can be used to optimize placement.
- The wireless adapter requires a powered USB port (100mA).
For Optimal Battery Life:
- Make sure the battery is fully charged before initial use.
- Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery in a partially charged state.
- If RGB lighting effects are unimportant to you, they can be disabled with CUE. This greatly extends battery life.
- Remove the USB charging cable promptly after the headset has been fully charged.
- Keep the headset at room temperature (20-30°C or 68-86°F).
For the Best Audio Performance:
- Download the CORSAIR Utility Engine software.
- Don't be afraid to use the software equalizer to adjust the audio quality to your liking. We've provided EQ presets for popular gaming and media types.
Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.
Adjustment
Place the headset on your head and adjust the headband for a comfortable fit. The extra-large ear pads and deep earcups enable the CORSAIR VOID PRO RGB headset to fit comfortably so you can play for hours without fatigue.
As with any audio product, reduce the volume before trying it with an audio source the first time.
Volume Adjustment:
- The "CUE Control" is the digital volume controller on the headset at the bottom corner of your left earcup: hold or repeatedly toggle it downwards to reduce volume, and upwards in short increments to increase volume.
- The standard Windows audio controller can also be used to adjust volume.
- Once an audio source is playing, set the volume to a comfortable level.
Headset Audio Settings:
- Short key press (0.1-0.5 seconds) on JOG DIAL toggles EQ.
- Medium key press (0.6-2 seconds) on JOG DIAL toggles Dolby Headphone 7.1 surround sound.
Headset Mic Control:
- Short key press (0.1-0.5 seconds) on mic mute button toggles mute on and off. ?
- Long key press (2-4 seconds) on mic mute button toggles sidetone on and off.
Note: CUE software can also be used to control these features.
Microphone Adjustment
Your new VOID PRO RGB Wireless Headset features a high performance "unidirectional" microphone designed to reject noise other than your voice, but it must be pointed directly at your mouth to function correctly.
- Bend the flexible microphone boom to best fit near to the left corner of your mouth.
- Mic automatically mutes when boom is up. ❌?
- Mic automatically un-mutes when boom is down. ✔️?
- For improved voice quality, the included microphone foam windscreen may be applied over the microphone head.
- We've found that about a 30 degree bend is a good place to start, but feel free to increase or decrease this if your mic is too loud or too soft.
Enjoy your CORSAIR VOID PRO RGB Wireless Headset! If you have any questions or comments, see the back panel of this guide for contact information.
