CORSAIR VOID RGB ELITE WIRELESS

Premium Wireless Gaming Headset with 7.1 Surround Sound

Controls and Features

The headset and its wireless transmitter feature several controls and indicators for operation. A diagram illustrates the placement of these components on the headset and transmitter.

Headset Components:

A Headband adjustment: Allows for adjusting the fit of the headset.
B Power button: Turns the headset on or off.
C Mute button: Mutes or unmutes the microphone.
D RGB light: User-programmable lighting effects.
E Microphone foam windscreen (removable): Reduces wind noise and plosives.
F Mic LED (mute): Indicates when the microphone is muted.
G Status LED (RF, battery): Displays wireless connection status and battery level.
H Jog dial: Controls volume and EQ settings.
I Charging port: Connects to the USB charging cable.
J Wireless sync LED indicator: Shows the status of the wireless connection sync.
K Pairing button: Used for pairing the transmitter with the headset (transmitter is paired by default).

Getting Started

Connecting the Headset

Connect the wireless USB transmitter to any working USB port on your PC. The headset is designed to operate at a range of up to 40 feet (12m) from the wireless transmitter, but other wireless devices, electronics, and obstructions such as walls may reduce wireless range.

IMPORTANT: The first time you use the CORSAIR VOID RGB ELITE WIRELESS Headset on a PC, the operating system will automatically install the device driver. After the device driver loads, we recommend you reboot your PC before use. Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.

iCUE Software

Go to corsair.com/support/downloads to download the iCUE Software. Using the iCUE software will enable the full feature set of your headset.

NOTE: If the headset is used without software, some features will be disabled.

Installation:

Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
After installation is complete, reboot your PC, and launch iCUE.

iCUE Software Features:

Choose your RGB color preference and light intensity.
Select and customize audio equalizer (EQ) settings.
Adjust microphone input volume, and microphone sidetone.
Set 7.1 surround sound on or off.

The software's built-in documentation explains how to use the headset's features in greater detail.

Charging

The CORSAIR VOID RGB ELITE WIRELESS Headset must be fully charged before its first use.

Connect the USB charging cable to any working USB port on your PC.
Connect the USB charging cable to the CORSAIR VOID RGB ELITE WIRELESS Headset.

The CORSAIR VOID RGB ELITE WIRELESS Headset battery has no "memory effect", so there is no need to completely discharge it before recharging.

Remember that the USB charging cable requires a high power (USB 2.0 or better) port. Some USB ports found on older devices do not support USB 2.0.

Audio Settings

Short press (0.1-0.5 seconds) on JOG DIAL toggles EQ.

Medium press (0.6-2 seconds) on JOG DIAL toggles 7.1 surround sound.

Mic Control

Short press (0.1-0.5 seconds) on mic mute button toggles mute on and off.

Long press (2-4 seconds) on mic mute button toggles sidetone on and off.

NOTE: iCUE software can also be used to control these features.

Status LED Indications

Single blink red = connected, battery low
Single blink green = connected, battery normal
Rapid blink red = disconnected, battery low
Rapid blink green = disconnected, battery normal
Solid amber = battery charging
Solid green = battery charged
Rapid blink amber = pairing mode

For Optimal Wireless Performance

Place the wireless USB transmitter in an open, unobstructed area.
Make sure the battery is fully charged before initial use.
Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery in a partially charged state.
If RGB lighting effects are unimportant to you, they can be disabled with iCUE to extend battery life.
Remove the USB charging cable promptly after the headset has been fully charged.
Keep the headset at room temperature (20-30°C or 68-86°F).

	Corsair VOID RGB ELITE WIRELESS Gaming Headset - Premium Wireless Audio Detailed information and setup guide for the Corsair VOID RGB ELITE WIRELESS Premium Wireless Gaming Headset with 7.1 Surround Sound. Learn about controls, charging, iCUE software, and optimal performance.
	Corsair VOID RGB ELITE Wireless Gaming Headset User Manual User manual for the Corsair VOID RGB ELITE Wireless Gaming Headset, detailing controls, features, setup, charging, audio settings, and microphone control.
	Corsair HS55 SURROUND Lightweight Stereo Gaming Headset with 7.1 Surround Sound Discover the Corsair HS55 SURROUND headset, a versatile wired gaming headset offering stereo and virtual 7.1 surround sound. Learn about its features, iCUE software integration, and adjustment tips for optimal comfort and audio.
	Corsair HS65 Surround Stereo Gaming Headset with 7.1 Surround Sound User guide for the Corsair HS65 Surround headset, covering setup, controls, iCUE software features, and audio/microphone adjustments for an optimal gaming experience.
	Corsair Virtuoso RGB Wireless XT Gaming Headset - High-Fidelity Audio Comprehensive guide for the Corsair Virtuoso RGB Wireless XT gaming headset, detailing setup, controls, features, wireless and Bluetooth connectivity, and iCUE software integration.
	Corsair VOID RGB ELITE Wireless Premium Gaming Headset with 7.1 Surround Sound User manual and guide for the Corsair VOID RGB ELITE Wireless headset, detailing controls, features, setup, charging, audio settings, microphone control, and wireless performance optimization. Includes multilingual support and safety information.
	Corsair HS65 SURROUND Stereo Gaming Headset with 7.1 Surround Sound - User Guide Learn how to set up and use your Corsair HS65 SURROUND headset, including connecting to PCs and consoles, using the iCUE software, and adjusting audio and microphone settings for an optimal gaming experience.
	Corsair Virtuoso RGB Wireless High-Fidelity Gaming Headset User Manual This document provides setup, usage, and feature information for the Corsair Virtuoso RGB Wireless High-Fidelity Gaming Headset, including wired and wireless modes, controls, LED indicators, and software integration.