YITAMOTOR Towing Mirror Installation Instructions
For 1999-2007 Chevy Silverado GMC 1500-3500 (07 Classic Models ONLY), 2000-2006 Suburban Tahoe Yukon.
Product Visual
Two large, black towing mirrors, designed for trucks, are displayed. One mirror is positioned slightly forward and angled, while the other is behind and angled slightly differently, showcasing their adjustable nature.
Important Notes
Read these instructions carefully before starting installation.
Using the proper tools will improve the quality of installation and reduce the time required.
All mirrors are designed asymmetrically for a better view range.
If any parts are missing or damage is found, please take a picture and contact customer support.
Refer to the vehicle owner's manual to adjust the new mirrors.
Step 1: Removing the Factory Mirror
- Open the front door to remove the upper extension triangular trim panel.
- Remove the foam pad from the door sheet panel.
- Remove the three (3) 10mm hex nuts securing the factory mirror.
- Carefully remove the factory mirror.
Diagram Description: The interior of a truck door panel is illustrated. A red arrow indicates the upper triangular trim panel with the text "Remove" next to it. The diagram shows the door handle, window controls, and the edge of the door panel.
Step 2: Installing the New Mirror
- Take the new mirror and feed its studs through the holes on the door panel.
- Install the three (3) provided hex nuts to secure the new mirror. Torque to 80 lb in.
- Insert the foam pad into the door sheet and reinstall the upper extension triangular trim panel.
- Repeat the process on the passenger side.
