SAT Infinitio Toilet Installation Guide
Model Numbers: SATINF011RREXP / SATINF011RREXPBKM
Toilet Installation
Follow these instructions carefully for the proper installation of your SAT Infinitio toilet.
-
Step 1: Preparation
Identify all components. The diagram shows the main toilet unit and the seat cover components (A and B).
-
Step 2: Mounting Brackets
Attach the mounting brackets to the toilet bowl using the provided screws. Ensure they are securely fastened.
-
Step 3: Toilet Bowl Placement
Position the toilet bowl in its intended location. The diagram illustrates aligning the bowl with the wall and securing it with bolts.
-
Step 4: Securing the Toilet
Fasten the toilet bowl to the floor using the provided bolts. Ensure the toilet is level.
-
Step 5: Seat Cover Attachment Mechanism
The diagram shows the mechanism for attaching the seat cover. Slide the components into place as indicated by the arrows.
-
Step 6: Seat Cover Hinge Alignment
Align the hinges of the seat cover with the attachment points on the toilet bowl.
-
Step 7: Connecting the Seat Cover
Attach the seat cover by aligning the hinges and pushing them onto the mounting posts until they click into place. A visual indicator shows the correct alignment.
-
Step 8: Final Seat Cover Attachment
Complete the attachment of the seat cover by ensuring it is properly seated and secured.
Seat Cover Installation
Detailed steps for installing the seat cover.
-
Step 1: Component Identification
Identify the seat cover and its associated mounting hardware.
-
Step 2: Preparing the Toilet Bowl for Seat Attachment
Ensure the mounting points on the toilet bowl are clean and ready for the seat cover installation.
-
Step 3: Attaching the Seat Hinges
Align the hinges of the seat cover with the corresponding mounting posts on the toilet bowl. Push down firmly until they click, indicating they are securely attached.
-
Step 4: Securing the Seat Cover
The diagram shows the final securing of the seat cover, ensuring it is stable and correctly positioned.
Important Notes and Specifications
- Torque Specification: Maximum torque for certain fittings is 6 Nm. Use the provided Allen key for tightening. [wrench emoji]
- Pipe Cutting: If pipe modification is required, cut to length 'X mm' using a hacksaw. Dispose of excess material in a waste bin. [saw emoji] [trash can emoji]
- Visual Check: Always perform a visual inspection during installation to ensure correct alignment and fit. [eye emoji]
- Auditory Confirmation: Listen for an audible 'click' when attaching components, indicating a secure connection. [ear emoji] [click sound emoji]
Multi-language Support Information
This manual provides installation instructions in multiple languages, including:
- English (en)
- Czech (cs)
- Slovak (sk)
- German (de)
- Russian (ru)
- Spanish (es)
- Hungarian (hu)
