SAT SATBRE031RREXVPSN Toilet Installation Guide
Comprehensive mounting instructions for the SAT SATBRE031RREXVPSN toilet, covering seat cover, tank, and toilet installation with detailed steps and part lists.
Seat Cover Installation
Part List: Components include the seat, lid, hinge sets (each with bolts, washers, and nuts).
Step 1: Attach Hinges
Attach the hinge mechanisms to the seat and lid using bolts (A), washers (D), and nuts (F). Do not fully tighten at this stage.
Step 2: Position Seat
Place the seat assembly onto the toilet bowl, aligning the hinge mounting points with the bolt holes on the toilet bowl.
Step 3: Insert Bolts
Insert the mounting bolts (A) through the designated holes in the toilet bowl from the underside or back.
Step 4: Secure with Washers and Nuts
Place washers (E) and nuts (F) onto the protruding bolts from the top of the hinge mechanism.
Step 5: Tighten Seat
Securely tighten the nuts using a screwdriver (C) to fix the seat in place. Ensure the seat is stable.
Step 6: Attach Seat and Lid
Attach the seat and lid to the mounted hinge posts. This typically involves a click mechanism.
Toilet Tank Installation
Part List: Components include the toilet tank, fill valve assembly, flush valve assembly, tank-to-bowl bolts with seals and nuts, and a flush handle.
Step 1: Connect Water Supply
Connect the water supply line to the fill valve inlet on the side of the tank. Ensure a secure connection. ?
Step 2: Install Flush Valve
Install the flush valve assembly into the bottom of the tank, ensuring the rubber seal is properly seated.
Step 3: Position Tank on Bowl
Carefully place the toilet tank onto the toilet bowl, aligning the tank bolt holes with the corresponding holes on the bowl. Ensure the tank-to-bowl gasket is correctly positioned between the tank and bowl.
Step 4: Secure Tank to Bowl
Insert the tank-to-bowl bolts through the tank and bowl, securing them with washers and nuts from underneath. Tighten these bolts evenly to create a watertight seal. ??
Toilet Installation
Part List: Components include the toilet bowl, toilet tank, seat and lid assembly, water supply line, tank-to-bowl bolts, floor bolts, seals, and mounting hardware.
Step 1: Connect Water Supply Line
Connect the flexible water supply hose to the inlet valve of the toilet tank. ?
Step 2: Position Toilet Bowl
Position the toilet bowl onto the prepared floor flange, ensuring a proper seal with the wax ring (implied).
Step 3: Secure Toilet Bowl
Secure the toilet bowl to the floor using the provided floor bolts and washers. Tighten them firmly. ?⚪
Step 4: Mount Toilet Tank
Mount the toilet tank onto the toilet bowl, aligning the bolt holes and using the tank-to-bowl bolts, washers, and nuts to secure it.
Step 5: Attach Seat and Lid Assembly
Attach the seat and lid assembly to the toilet bowl. This involves aligning the hinge posts with the mounting holes on the bowl and securing them.
Step 6: Connect Water Supply to Tank
Connect the water supply line to the fill valve inlet on the tank. ?
Step 7: Test and Check
Turn on the water supply and check for leaks. Flush the toilet to test the flushing mechanism. ✔️
Step 8: Install Seat Hinges
Install the hinge mechanisms for the seat onto the toilet bowl, typically using bolts that pass through the bowl.
Step 9: Attach Seat to Hinges
Attach the seat and lid to the installed hinge mechanisms.
Step 10: Final Check
Perform a final check of all connections and ensure the toilet is stable and functioning correctly.
