COOSPO HW706 User Manual

Standard Accessories

• Heart Rate Monitor with Armband x 1
• Charging Cable x 1
• User Manual x 1

Product Introduction

The COOSPO HW706 transmits real-time heart rate data through Bluetooth or ANT+ to receiving devices, such as sports watches, bike computers, and fitness applications. It helps you manage your exercise intensity in a scientific approach.

Note: This product is for sports purposes only and is not meant to replace any medical device.

Function and Operation

Power On

Press the on/off button. The LED blue light flashes quickly, and the monitor starts to acquire heart rate data. Once the heart rate is detected, the light will flash slowly.

Front View Description: The front of the heart rate monitor features an On/Off Indicator Light LED and a Start-up Button.

Power Off

Press the on/off button when the device is not in use. The LED red light flashes quickly, and then the device shuts down.

Power and Charging

1. When you press the on/off button, if the LED red light is on, it indicates that the battery is low and requires charging.
2. The product uses magnetic charging. During charging, the RED and GREEN LEDs will flash alternately. After it is fully charged, the GREEN LED will remain on, indicating that charging is complete.

Charging Terminals Description: The rear of the heart rate monitor contains charging terminals.

Wearing the Device

Remove the protective sticker from the charging terminals before first use.

Wear the armband on the upper portion of the forearm. The monitor should be positioned on the inside or top of the forearm. It should be worn snugly enough not to move during activity, but not so tight that it restricts arm circulation.

Wearing Position Description: An illustration shows the correct placement of the heart rate monitor on the forearm.

Initial Setup with Bluetooth Smart Fitness Apps

1. Turn on Bluetooth in your phone's settings.
2. Wear the monitor correctly and press the start button. Important: Do not search for and add devices via your phone's general Bluetooth settings. Add the heart rate monitor directly within the companion app.

Connection with ANT+ Sports Devices

(Sports Watches, Bike Computers, etc.)

1. Add the heart rate monitor to your ANT+ device's add list to find and connect it.
2. Start your training session according to the reminder on your watch or other connected device, and check your real-time heart rate on the display screen.

The Bluetooth 4.0 and ANT+ features of this product can operate simultaneously. If you need to connect to both a phone and ANT+ devices at the same time, please ensure the devices you are connecting to are equipped with Bluetooth 4.0 or ANT+.

Specifications

Heartool APP Instruction

1. Heartool App Installation: Please search for "heartool" in the Google Play Store or Apple App Store and install the application.

   [Download on the App Store]

   [Get it on Google Play]

2. Bind Your Device:
   • Open the Heartool app and register an account.
   • Power on the HW706.
   • Navigate to "Setting > Device" and click on "HW706" in the Bluetooth list to establish a connection.
3. Max Heart Rate Alert Setting: Please go to "Setting > Heart rate zone & alarm" to configure your preferences.

Applicable Smart Phones

• iOS 9.0 or above, iPhone 5s model or above
• Android 4.3 or above with Bluetooth 5.0

Compatible Apps

• CoospoRide, Endomondo, Wahoo, Runtastic, UA Run, Zwift, Opendrider, or other Apps with heart rate display functionality.

Cautions

While charging, ensure the contact points of the charging head are not short-circuited. The following operations are prohibited:

An icon indicating that short-circuiting the charging head contact points is not allowed.

Disclaimer

• Please note that due to the manufacturer's ongoing development plans, the products described in this manual may be subject to change without prior notice.
• COOSPO makes no representations or warranties, express or implied, with respect to this manual or the products described herein.
• COOSPO shall not be liable for any damages, losses, costs, or expenses, whether direct, indirect, incidental, consequential, or special, arising out of or related to the use of this material or the products described herein.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Product Care and Safety

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, contact COOSPO support.
• The product must be returned to the manufacturer for any service or repair.