COOSPO H8 USER MANUAL
H8-RTN-11-2150
Scan to Get More Languages
COOSPO
All About Passion
Visit: https://manual-hub.com/
Standard Accessories
- Heart Rate Monitor X1 (CR2032 Included)
- Chest Strap x 1
- User Manual x 1
Product Introduction
The COOSPO H8 supports Bluetooth 5.0 real-time heart rate monitoring. It can transmit heart rate data wirelessly to your smartphone or bike computer.
Function and Operation
Wear the Heart Rate Monitor
- Moisten the electrode areas of the chest strap.
- Attach the connector to the chest strap, marked 'L' towards left.
- Adjust the strap length to fit tightly but comfortably. Ensure the moist electrode areas are firmly against your skin and that the COOSPO logo on the connector is in a central and upright position.
Connect to the App
Turn on Bluetooth: Navigate to Settings and toggle Bluetooth to the ON position.
Maintaining
The COOSPO H8 is a high-tech instrument that requires careful handling. Follow these care instructions to ensure reliable measurement and to maximize the lifespan of the heart rate monitor.
- Heart Rate Connector: Detach the connector from the strap after each use. Dry the connector with a soft towel. Do not use cleaning chemicals.
- Chest Strap: Clean the strap under running water after each use and hang it to dry. Cleaning the strap in a washing machine or dryer is strictly prohibited.
Never use cleaning chemicals. Cleaning chemicals may cause rapid aging of the strap and shorten its service life.
Do not stretch the strap or bend the electrode areas sharply.
Do not store the heart rate monitor while wet in non-breathable materials to prevent rapid oxidation. Dry and store the strap and the connector properly.
Battery Replacement
- Use a coin to twist the battery cover counter-clockwise until it clicks out of place.
- Remove the battery and dispose of used batteries properly in accordance with local environmental regulations.
- Replace the battery with the positive (+) side facing up. Use a coin to twist the battery cover back into place.
Specifications
| Attribute | Value |
|---|---|
| Weight | 14.2 g (sensor only) |
| Wireless | Bluetooth & ANT+ |
| Distance | 10 m |
| Size | 60 x 33.8 x 12.2 mm (sensor only) |
| Battery Life | 400 hours |
| Waterproof | IP67 |
| Heart Rate Range | 30 - 240 bpm |
| Strap Adjustable | (L) 65 - 95 cm |
Heartool APP Instruction
- Please search "heartool" in Google Play or the App Store and install the app.
- Bind Your Device: Open the Heartool app and register. Power on the H8. Navigate to "Setting-Device" and click "H8" in the Bluetooth list to connect.
- Max Heart Rate Alert Setting: Please go to "Setting-Heart rate zone & alarm" to configure your settings.
Applicable Smart Phones
- iOS 7.0 or above, iPhone 4s model or above
- Android 4.3 or above with Bluetooth 4.0
Compatible Apps
- CoospoRide
- Wahoo Fitness
- Endomondo
- Polar Beat
- Adidas Running
- UA Run
- Zwift
- Nike+ Run Club, or other Apps with heart rate display feature.
Disclaimer
- The product described in this user manual is subject to change without prior notice, due to the manufacturer's further development program.
- COOSPO shall not be liable for any damages, losses, costs, or expenses, direct, indirect, or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
[Recycle Symbol] Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
- [Warning] Do not open or modify the product.
- [Warning] Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair.
