USER MANUAL

Standard Accessories

• Heart Rate Monitor with Armband x 1
• Charging Cable x 1
• User Manual x 1

Product Introduction

The HW706 transmits real-time heart rate data through Bluetooth or ANT+ to receiving devices such as sports watches, bike computers, and fitness apps. This helps you manage your exercise intensity scientifically. This user manual provides instructions for using the product; please keep it for future reference.

Note: This product is for sports purposes only and is not intended to replace any medical device.

Function and Operation

Power on

Press the on/off button. The LED blue light flashes quickly, and the monitor begins to acquire your heart rate data. Once the heart rate is detected, the light will flash slowly.

Front View Description: The front of the monitor features an "On/Off Indicator Light LED" and a "Start-up Button".

Power off

Press the on/off button when the device is not in use. The LED red light flashes quickly, and then the device shuts down.

Charging

Battery Status: If the LED red light is on when you press the on/off button, it indicates the battery is low and needs charging.

Charging Process: The product uses magnetic charging. During charging, the RED and GREEN LED lights flash alternately. After the device is fully charged, the GREEN LED will remain on, indicating charging is complete.

Rear View Description: The rear of the Heart Rate Monitor shows the "Charging Terminals".

Wearing

Remove the protective sticker from the charging cable before use.

Wear the armband on the upper portion of the forearm. The Monitor should be positioned on the inside or top of the forearm. It should be worn snug enough not to move during activity but not so tight that it restricts arm circulation.

Wearing Position Description: An illustration shows the correct placement of the monitor and armband on the forearm.

Initial Setup with Bluetooth Smart Fitness Apps

1. Turn on Bluetooth in your phone's settings.
2. Wear the Monitor correctly and press the start button.

Note: Do not search and add devices directly from your phone's Bluetooth settings. Please add the heart rate Monitor within the dedicated App.

Connection with ANT+ Sports Devices (Sports Watches, Bike Computer...)

1. Add the heart rate Monitor in your ANT+ device's settings and add it to the device list.
2. Start training according to the reminder from your watch or other ANT+ devices, and check your real-time heart rate on the display screen.

Note: The Bluetooth 4.0 and ANT+ features of this product can operate simultaneously. If you need to connect to both a phone (via Bluetooth) and ANT+ devices at the same time, please ensure your connected devices are equipped with Bluetooth 4.0 or ANT+.

Specifications

Heartool APP Instruction

1. App Installation

   Please search for "heartool" in the Google Play Store or Apple App Store and install the application.

   [Apple App Store] [Google Play Store]

2. Bind Your Device

   Open the Heartool app and register an account.

   Power on the HW706 device.

   Navigate to "Setting-Device" and click on "HW706" from the Bluetooth list to establish a connection.

3. Max Heart Rate Alert Setting

   To set up heart rate alerts, please go to "Setting-Heart rate zone & alarm".

Applicable Smart Phones

• iOS 9.0 or above, iPhone 5s model or above
• Android 4.3 or above with Bluetooth 5.0

Compatible Apps

CoospoRide, Endomondo, Wahoo, Runtastic, UA Run, Zwift, Opendrider, or other Apps featuring heart rate display functionality.

Cautions

⚠️ While charging, the contact points of the charging head must not be short-circuited. The following operations are prohibited:

? [Illustration of prohibited charging action: a charging connector with a red cross over it]

Disclaimer

• Please note that due to the manufacturer's ongoing development plans, the products described in this manual may be subject to change without prior notice.
• COOSPO makes no representations or warranties with respect to this manual or the products described herein.
• COOSPO shall not be liable for any damages, losses, costs, or expenses, direct, indirect, incidental, consequential, or special, arising out of, or related to the use of this material or the products described herein.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Waste Disposal

⚠️ Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

⚡️ [Illustration of electrical hazard symbol]

Product Safety and Service

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, call COOSPO support.
• Product must be returned to the manufacturer for any service or repair.