USER MANUAL

Scan for More Information

Scan the QR code for more details. Available in multiple languages: 詳しくはこちら (Japanese), Nach mehr SUCHEN (German), SCANNEZ pour plus (French), ESCANEAR para más (Spanish), Cerca altro (Italian).

Model Identifier: HW706-RTN-I1-2228

Standard Accessories

• Heart Rate Monitor with Armband x 1
• Charging Cable x 1
• User Manual x 1

Product Introduction

The HW706 transmits real-time heart rate data through Bluetooth or ANT+ to receiving devices, such as sports watches, bike computers, and fitness apps. It helps you manage your exercise intensity scientifically.

This user manual is provided to help you understand how to use this product. Please keep it for future reference.

Note: This product is intended for sports purposes only and is not a substitute for any medical device.

Function and Operation

Power On

To power on, press the on/off button. The LED blue light will flash quickly, indicating the monitor is starting to acquire heart rate data. Once the heart rate is detected, the light will flash slowly.

Diagram Description: Front View of the monitor showing the On/Off Indicator Light LED and the Start-up Button.

Power Off

To power off, press the on/off button when the device is not in use. The LED red light will flash quickly, and then the device will shut down.

Power and Charging

1. When the on/off button is pressed and the LED red light is on, it indicates that the battery is low and requires charging.
2. The product uses magnetic charging. During charging, the RED and GREEN LED lights will flash alternately. After the battery is fully charged, the GREEN LED will remain on, signaling that charging can be stopped.

Diagram Description: Heart Rate Monitor showing Charging Terminals.

Action: Remove Protective Sticker from the charging cable.

Diagram Description: Charging Cable [Rear View].

Wearing

Wear the armband on the upper portion of the forearm. The monitor should be positioned on the inside or top of the forearm. It should be worn snugly enough to prevent movement but not so tight as to restrict arm circulation.

Diagram Description: Illustration showing the correct Wearing Position on the forearm.

Initial Setup with Bluetooth Smart Fitness Apps

1. Turn on Bluetooth in your phone's settings.
2. Wear the monitor correctly and press the start button.

Note: Do not search for and add devices directly from your phone's Bluetooth settings. Add the heart rate monitor within the companion app.

Connection with ANT+ Sports Devices

This section applies to devices like Sports Watches and Bike Computers.

1. Add the heart rate monitor to the ANT+ device's pairing list to find and connect it.
2. Start your training session according to the reminder from your watch or other connected device, and check your real-time heart rate on the display screen.

Note: The Bluetooth 4.0 and ANT+ features of this product can operate simultaneously. If you need to connect to both a phone and ANT+ devices at the same time, please ensure the connected devices are equipped with Bluetooth 4.0 or ANT+.

Specifications

Applicable Devices and Apps

Applicable Smart Phones

• iOS 9.0 or above, iPhone 5s model or above
• Android 4.3 or above with Bluetooth 5.0

Compatible Apps

• CoospoRide
• Endomondo
• Wahoo
• Runtastic
• UA Run
• Zwift
• Opendrider
• Heartool
• Other Apps with heart rate display feature

Cautions and Disclaimer

Cautions

While charging, ensure the contact point of the charging head is not short-circuited. The following operations are prohibited:

Diagram Description: Illustration showing a forbidden action related to charging terminals, likely indicating short-circuiting.

Disclaimer

• Please note that due to the manufacturer's ongoing development plans, the products described in this manual may be subject to change without prior notice.
• The company makes no representations or warranties, express or implied, regarding this manual or the products described herein.
• The company shall not be liable for any damages, losses, costs, or expenses, whether direct, indirect, incidental, consequential, or special, arising from or related to the use of this material or the products described herein.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Product Care and Disposal

Product Disposal: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, contact COOSPO support.
• The product must be returned to the manufacturer for any service or repair.