COOSPO HW706 User Manual
Model: HW706-RTN-I1-2228
Scan for more information. Available in Japanese, German, French, Spanish, and Italian.
Brand: COOSPO
Tagline: All About Passion
Standard Accessories
- Heart Rate Monitor with Armband x 1
- Charging Cable x 1
- User Manual x 1
Product Introduction
The HW706 transmits real-time heart rate data through Bluetooth or ANT+ to receiving devices, such as sports watches and bike computers. It helps you manage your exercise intensity in a scientific approach. This user manual is for you to understand how to use this product; please keep it for future reference.
Note: This product is for sports purposes only and is not meant to replace any medical device.
Function and Operation
Power On
Press the on/off button. The LED blue light flashes quickly, indicating the monitor is acquiring heart rate data. As the heart rate is detected, the light will flash slowly.
Front View: The device features an On/Off Indicator Light LED and a Start-up Button.
Power Off
Press the on/off button when the device is not in use. The LED red light flashes quickly, and then the device shuts down.
Power / Charging
Low Battery: When you press the on/off button, if the LED red light is on, it indicates that the battery is low and needs to be charged.
Charging Process: The product uses magnetic charging. During charging, the RED and GREEN LEDs flash alternately. After it is fully charged, the GREEN LED will be on, and you can stop charging.
Charging Terminals: Located on the Heart Rate Monitor.
Wearing
Remove the protective sticker from the charging terminals before first use.
Wear the armband on the upper portion of the forearm. The monitor should be positioned on the inside or top of the forearm. It should be worn snug enough not to move on your arm, but not so tight that it restricts arm circulation.
Wearing Position: Illustration shows the correct placement on the forearm.
Initial Setup with Bluetooth Smart Fitness Apps
- Turn on Bluetooth in your phone's settings.
- Wear the Monitor correctly and press the start button.
Note: Do not search and add devices via your phone's Bluetooth settings. Please add the heart rate monitor within the specific fitness app.
Connection with ANT+ Sports Devices
(e.g., Sports Watches, Bike Computers...)
- Add the heart rate monitor to the ANT+ device's add list to find and connect this product.
- Start training according to the reminder on the watch or other devices, and check your real-time heart rate on the display screen.
The Bluetooth 4.0 and ANT+ features of this product can work simultaneously. If you need to connect to a phone and ANT+ devices at the same time, please confirm that the device you are connecting is equipped with Bluetooth 4.0 or ANT+.
Specifications
| Feature | Details |
|---|---|
| Weight | 18 g |
| Battery Life | 20 hours for continuous heart rate monitoring |
| Wireless | Bluetooth & ANT+ |
| Battery Type | Rechargeable lithium battery |
| Working Temperature | 0 °C ~ 45 °C |
| Size | 42.6 x 36 x 12.5 mm |
| Waterproof | IP67 |
Applicable Smart Phones
- iOS 9.0 or above, iPhone 5s model or above
- Android 4.3 or above with Bluetooth 5.0
Compatible Apps
- CoospoRide, Endomondo, Wahoo, Runtastic, UA Run, Zwift, Opendrider, Heartool, or other Apps with heart rate display features.
Cautions
⚠️ While charging, the contact point of the charging head must not be short-circuited.
The following operations are not allowed: [charging symbol crossed out]
Disclaimer
Please note that due to the manufacturer's further development plans, the products described in this manual may be changed without notice.
The company makes no representations or warranties with respect to this manual or the products described herein.
The company shall not be liable for any damages, losses, costs, or expenses, direct, indirect, or incidental, consequential, or special, arising out of, or related to the use of this material or the products described herein.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- 1. This device may not cause harmful interference, and
- 2. This device must accept any interference received, including interference that may cause undesired operation.
Safety and Disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair.
