COOSPO H8 User Manual

Standard Accessories

• Heart Rate Monitor X1 (CR2032 Included)
• Chest Strap x 1
• User Manual x 1

Product Introduction

The COOSPO H8 supports Bluetooth 5.0 real-time heart rate monitoring. It can transmit heart rate data wirelessly to your smartphone or bike computer.

Function and Operation

Wear the Heart Rate Monitor

1. Moisten the electrode areas of the chest strap.

   [Diagram: Chest strap with two electrode areas shown, with water droplets above them indicating moisture.]

2. Attach the connector to the chest strap, marked 'L' towards left.

   [Diagram: Heart rate monitor connector being attached to the chest strap. The connector has 'L' and 'R' indicators, and a CE mark. An arrow shows the direction of attachment.]

3. Adjust the strap length to fit tightly but comfortably. Check if the moist electrode areas are firmly against your skin and if the COOSPO logo of the connector is in a central and upright position.

   [Diagram: A person's torso showing the correct placement of the heart rate monitor chest strap.]

Connect to the App

Turn on Bluetooth: Navigate to Settings > Toggle Bluetooth to ON position.

[Diagram: Smartphone screen showing Bluetooth settings with the toggle switch in the ON position.]

Maintaining

The H8 is a high-tech instrument that should be handled with care. Follow the caring instructions to ensure reliable measurement and to maximize the life span of the heart rate monitor.

1. Heart Rate Connector

   Detach the connector from the strap after each use and dry the connector with a soft towel. Do not use cleaning chemicals.

2. Chest Strap

   Clean the strap under running water after each use and hang to dry. Cleaning of the strap in a washing machine or dryer is strongly prohibited.

   Never use cleaning chemicals. (Cleaning chemicals may cause rapid aging of the strap and shorten the service life).

   Do not stretch the strap or bend the electrode areas sharply.

   Do not store the heart rate monitor wet in non-respirable materials to prevent rapid oxidation. Dry and store the strap and the connector.

Battery Replacement

1. Use a coin and twist the battery cover counter-clockwise until it clicks out of place.

   [Diagram: Close-up of the battery compartment cover being opened with a coin, showing an 'OPEN' indicator.]

2. Remove the battery and properly dispose of used batteries in accordance with local environmental regulations.

   [Symbols: Battery disposal symbol (crossed-out battery), recycling arrows symbol.]

3. Replace the battery with the positive (+) side up. Use a coin to twist the battery cover back into place.

   [Diagram: Battery being inserted into the compartment with the positive (+) terminal facing up, and the cover being closed.]

   Warning: To avoid danger, batteries should be kept away from children.

Specifications

Heartool APP Instruction

Step 1: Install the App

Please search "heartool" in Google Play or App Store and install the app.

[App Store download icon] [Google Play download icon]

Step 2: Bind Your Device

Open the Heartool app and register. Power on the H8. Go to "Setting-Device" and click "H8" in the Bluetooth list to connect.

Step 3: Max Heart Rate Alert Setting

Please go to "Setting-Heart rate zone & alarm" to set.

Applicable Smart Phones

• iOS 7.0 or above, iPhone 4s model or above
• Android 4.3 or above with Bluetooth 4.0

Compatible Apps

CoospoRide, Wahoo Fitness, Endomondo, Polar Beat, Adidas Running, UA Run, Zwift, Nike+ Run Club, or other Apps with heart rate display feature.

Disclaimer and Compliance

Disclaimer

• The product described in this user manual is subject to change without prior notice, due to the manufacturer's further development program.
• COOSPO shall not be liable for any damages, losses, costs, or expenses, direct, indirect, or incidental, consequential, or special, arising out of, or related to the use of this material or the products described herein.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and.
2. This device must accept any interference received, including interference that may cause undesired operation.

Environmental Disposal

[Symbol: Crossed-out wheeled bin]

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

Safety Precautions

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, call COOSPO support.
• Product must be returned to the manufacturer for any service or repair.