USB4 Receiver Test Application Help

Introduction

This document provides comprehensive help and guidance for the Tektronix USB4 Receiver Test application. Designed for USB4 Gen 2 and Gen 3 compliance testing, the application assists users in performing receiver tests according to the Gen 2 / Gen 3 USB4 Electrical Compliance Test Specification Revision 1.03.

Key Features and Benefits

• Facilitates Calibration and Compliance Testing as an integral part of the receiver solution.
• Offers an automated calibration procedure with the ability to reload and rerun previous calibration files.
• Supports Receiver Bit Error Rate (BERT), Signal Frequency Variations Training (SFVT), Jitter Tolerance (JTOL), and Sensitivity tests for the Device Under Test (DUT).
• Integrates with Anritsu BERT MP1900A series, providing tools to visualize and control impairments and observe real-time eye performance for USB4 devices at 10 and 20 Gbps.
• Displays eye diagrams at TP3' and TP3 endpoints for detailed analysis.
• Ensures reliable and accurate results, reducing test execution time and required skillsets.
• Accommodates tests at TP3' (Case 1) and TP3 (Case 2) test points, including a crosstalk feature.
• Generates detailed reports for all calibration and test modules.

Getting Started and Support

The document outlines the required equipment and accessories, installation procedures, and operating basics for the Tektronix USB4 Receiver Test application.

For product information, sales, service, and technical support, users can visit tek.com. For warranty information, visit tek.com/warranty.

When contacting Tektronix Technical Support, it is recommended to provide specific details such as instrument model numbers, hardware options, software version, and a clear description of any issues encountered.