USB4 v2 Receiver Test Application Help

This document provides comprehensive guidance for the Tektronix USB4 v2 Receiver Test Application. It details the procedures for performing electrical compliance tests according to the USB4 V2 Gen 4 Electrical Compliance Test Specification Revision 0.9.

Key Features and Benefits

• Facilitates Calibration and Compliance Testing for USB4 v2 receivers.
• Offers an automated calibration procedure with options to reload and resume.
• Supports Case 1, Case 2, and Aggressor calibrations with verification steps.
• Enables Receiver TER (Throughput Error Rate) testing using the Electrical Testing Tool (ETT) from USB-IF, with manual options available.
• Integrates with Anritsu BERT MP1900A series for visualization and control of impairments, supporting speeds up to 25.6 Giga baud.
• Provides detailed reports for all calibrations and tests.

Getting Started

The guide covers essential steps for setting up the application, including required equipment and accessories, software installation, and PC configuration.

Resources

For product information, sales, service, and technical support, visit tek.com. For warranty information, visit tek.com/warranty. Users can also register their product at tek.com/register.