ZUMIMALL F5K Battery Powered Camera

Warranty Service

Thank you for your purchase and trust. ZUMIMALL is committed to optimizing products and improving lifetime customer service for a better shopping experience. For any problems, please email F5@zumimall.com. Solutions will be provided within 24 hours. Advice or suggestions are greatly appreciated.

Register via the link below to get a 3 Years Warranty Extension: http://bit.ly/zuReg

Product Service Email: F5@zumimall.com

Distributor Email: distributor@zumimall.com

More About Us:

• Web: www.zumimall.com ?
• Facebook: www.facebook.com/zumimalloffice ?
• Amazon Store: www.amazon.com/zumimall ?

Brand Story

Founded in 2008, Zumimall focuses on the design and research of intelligent security technology. Zumimall prioritizes consumer needs, striving to create smart home products that lead global home fashion trends. Zumimall believes technology changes life. With high-quality products and first-class service, Zumimall has earned the trust of millions of customers worldwide, serving 45 continents and covering 80% of the population. Zumimall is a provider of a smart lifestyle and a guardian of life's wonderful moments.

What's in the Box

• ZUMIMALL Battery Camera ?
• Solar Panel ☀️
• Outdoor Metal Mount ?
• Screws Set ?
• Quick User Guide
• USB Cable ?

Note: Micro SD card and power adapter are not included.

Product Diagram

The camera features the following components:

• 1: Camera Lens ?
• 2: PIR Sensor ?‍♂️
• 3: LED Indicator ?
• 4: IR Lamp ?
• 5: Microphone ?
• 6: Speaker ?
• 7: SD Card Slot ?
• 8: USB Port ?
• 9: Charging Status ⚡
• 10: Reset Hole ?
• 11: Power Button ?

Button Functions:

• Power Button: Keep pressing for 5-10 seconds to power on/off.
• Reset Button: Keep pressing for 5-10 seconds to reset the device.

Indicator Light Meanings:

• Blink Slowly in Red ?: Awaiting Wi-Fi connection, ready for adding devices.
• Blink Fast in Red ??: Wi-Fi connecting.
• Solid in Red ?: Network problem.
• Solid in Blue ?: Wi-Fi connected, camera running normally.
• Blink Slowly in Blue ?: Firmware update in progress.

Download and Install App

Download the ZUMIMALL App from Google Play™ (▶️) or App Store™ (?). Alternatively, scan the provided QR codes with your smartphone.

Note: Please enable the following permissions for the ZUMIMALL App:

• Allow access to mobile cellular data and wireless LAN for successful camera connection.
• Allow the app to receive pushed messages to get motion detection alarms.

Account Registration

New users must sign up for a ZUMIMALL account using an email address. Click 'Sign up' and follow the on-screen steps to complete registration, including setting a nickname and password (8-16 digits, including numbers and letters).

Add Camera to App

5.1 Preparations for Connection

• Insert a Micro SD card (not included) to save video clips, or subscribe to the 7-day free cloud service. Without either, no video will be saved.
• The camera supports 2.4GHz Wi-Fi networks only; 5GHz is not supported.
• For network connection, place the camera close to your router (recommended within 10-15 feet / 3-4.5 meters).

5.2 Connect Camera to App

1. Tap 'Add Device' on the app's homepage.
2. Select 'Battery Camera' from the device list.
3. Reset the device: Hold the RESET button ? for 4-5 seconds until the indicator light flashes red ?. Tap 'Next'.
4. Wi-Fi Setup: Select your 2.4GHz Wi-Fi network and enter the password.
5. Turn on the camera: Hold the device power button ?. If the camera is asleep, press the [battery camera] button to wake it. Stay near the router for the best signal. Tap 'Next'.
6. Prepare for Scanning: Remove any protective film from the camera lens. Tap 'Next' to display a QR code on your phone. Hold your phone 5-8 inches (15-20 cm) from the camera lens. A tone will be heard when successfully scanned.
7. Scan QR Code: Let the device scan the QR code displayed on your phone. The indicator light should be flashing slowly in red ?.
8. Network Diagnosis: The app will perform a network diagnosis, showing Wi-Fi signal strength. If the signal is good, you can proceed with installation.
9. Connect Network: Ensure the device is powered on, connected to the router, and on the same network as your phone. The app will search for the device, register it to the cloud, and initialize it. Installation is complete when the progress reaches 100%.

Installation Tips:

• Use the outdoor mounting bracket if installing outside.
• Recommended installation height is 2-3 meters (6.5-10 feet).
• Avoid direct sunlight on the camera lens.
• Avoid placing the camera lens too close to walls or glass.

Camera Installation

Step 1: Fix the bracket to the desired location using the supplied screws ?.

Step 2: Fasten the camera onto the metal mount and secure it.

Step 3: Adjust the viewing angle of the camera ?.

Important Notes

To reduce false alarms:

• Do not install the camera facing strong lights, mirrors, windows, or swimming pools.
• Avoid placing the camera too close to busy traffic areas.
• Recommended distance for motion detection is within 32 feet (10 meters).
• Keep the camera away from heat outlets like air conditioner vents or projector heat transfer vents.
• Maintain at least 1 meter (3 feet) distance from other wireless devices (e.g., microwave stoves, Wi-Fi routers ?) to prevent interference.

Monitoring Area

For optimal detection, avoid installing the camera vertically towards moving objects. It is suggested that the angle between the PIR Sensor ?‍♂️ and detected objects be more than 10 degrees. The camera's motion sensor is more sensitive to side-to-side movement across its field of view than to movement directly towards or away from the camera.

Device Menu

The app interface provides access to various functions:

• Main Interface: Device List, Real Time view ▶️, Camera Name, Settings ⚙️, Messages ✉️, Personal Homepage ?.
• Live View Screen: HD/SD Switch, Volume On/Off ?, Full Screen ?, Screenshot ?, Intercom ?, Record ⏺️, Motion Detection ?‍♂️, Siren ?, Album ?️.
• History/Cloud: Access recorded events via History ? or Cloud ☁️. A calendar and time bar are available for navigation.

PIR Body Detection

10.1 Body Detection Alarm Setting

Motion Detection sensitivity defaults to 'High' but can be adjusted. Options include 'Low' (up to 5 meters / 16ft) and 'High' (up to 10 meters / 32ft). Higher sensitivity detects further but consumes more battery. An 'Alarm Interval' can be set (e.g., 2, 5, or 10 minutes) to avoid repeated notifications for the same event. 'Day Detection' and 'Night Detection' can be configured, along with an 'Alert Plan' to set specific times for alarms.

Note: The higher the sensitivity, the longer the detection distance, but the faster the battery drains.

10.2 Alarm Notification

The camera is an event-recording device, triggered only by motion detection. System reactions include:

• Alarm notifications with sounds via the App ?.
• Pictures/videos automatically stored on the Micro SD Card ? or Cloud ☁️.

10.3 Record/Playback/Delete

Access all recorded events on the 'Messages' page by clicking 'Alarm Messages'. You can play back or delete recordings from this list. Screenshots and manually recorded videos are saved in 'Pictures & Videos', which can be saved to your phone's album or shared.

Two-Way Audio

To use two-way audio:

1. Go to the live view page ▶️.
2. Activate the audio option.
3. Press and hold the intercom button ? to speak.
4. Release the button to listen.

Power Saving Settings

12.1 Alarm Interval & Shooting Interval

This function prevents repeated alarms for the same event. For example, a 5-minute interval means no new alarm push notification will be sent for 5 minutes after the first one, even if motion continues. This is off by default.

12.2 Maximum Shooting Time & Recording Time

You can set the duration of video recordings (e.g., 10, 20, or 30 seconds). Shorter recording times reduce power consumption.

12.3 Alarm Plan

Set a weekly/daily alarm schedule. For instance, you can configure the camera to only trigger and record alarms between 8:00 PM and 8:00 AM (20:00-08:00). Up to 4 time periods can be set.

Solar Panel

Installation:

1. Find a location with ample sunlight throughout the day. Adjust the angle for maximum exposure. The ideal angle is approximately your local latitude ± 5 degrees.
2. Mount the bracket using the provided mounting template and screws ?.
3. Slot the solar panel into the bracket and ensure it is secure.
4. Loosen the adjusting control on the bracket, adjust the solar panel's angle to receive direct sunlight ☀️, and then retighten the control.
5. Connect the solar panel to the camera using the micro USB cable ?.

Notes:

• Ensure no part of the solar panel is blocked; efficiency drops significantly even with minor obstruction.
• Install the solar panel angularly, not horizontally, to prevent dust and debris accumulation.
• Wipe the solar panel regularly to remove dust or debris.

The efficiency of solar energy conversion is affected by weather, seasons, and geographic location.

Battery Management

1. The camera has a built-in high-capacity battery, estimated to last 2-3 months with typical usage (15 wakes per day, 10 minutes of video playback daily). Battery life depends on wake-up frequency; more frequent wakes drain the battery faster. Consider lowering 'Motion Detection' sensitivity or turning it off periodically.
2. The app will send reminders when the battery level drops below 20%.
3. Charge the camera using a DC 5V 2A charger; a full charge takes approximately 5-8 hours.

Multi Device Management

15.1 Multi Camera Management

You can add more devices to your account by tapping the '+' icon on the app's homepage.

15.2 Multi-User Sharing

One ZUMIMALL account cannot be logged in on multiple devices simultaneously, and one camera cannot be connected to multiple devices. However, a camera can be shared from one user (A) to another (B).

Sharing Process:

1. User B downloads the ZUMIMALL App and creates a new account.
2. User A clicks 'Add' on their app.
3. User A scans User B's QR Code or inputs User B's account ID.
4. User B accepts the share request and refreshes their device page.

When sharing, you can set device usage permissions: 'Viewable only' (browse devices, uncontrollable) or 'Allow control' (browse and control equipment).

Reset Camera

To reset the camera, locate the reset hole ?. Press and hold the reset button inside for 3-5 seconds until you hear a 'Boogu' sound. Wait for the camera status indicator to flash red slowly ?, indicating it's ready for reconnection.

ZUMIMALL FAQ

1. Unable to connect network: Check Wi-Fi name and password (no special symbols). Ensure Wi-Fi is 2.4GHz. Connect the camera and phone to the same Wi-Fi environment and place the camera near the router.
2. Connect to a new network: Remove the camera from the ZUMIMALL app, long-press the reset button ? to restore factory settings, then reconnect.
3. Reset the camera: Long-press the reset button ? until you hear the 'Boogu' sound. Wait for the status indicator to flash red slowly ?.
4. Cannot charge: Charge for at least 8-10 hours with a 5V/2A adapter. Ensure the charging cable and adapter are functional. A solid red light ? indicates charging; a solid blue light ? indicates a full charge.
5. Frequently received alarm information: Reduce motion detection sensitivity. Check for objects within the detection range that might trigger the PIR sensor. Enable 'Alarm only when people appear' to filter false positives using humanoid algorithms.
6. Passersby not triggering alarm: Ensure good network condition (Wi-Fi signal value not below 70%). Ensure motion detection is on and increase sensitivity. Verify motion occurs within the PIR sensor's detection range.
7. No alarm video recording: Confirm the camera was triggered. Ensure the Micro SD card is inserted correctly and recognized, or that cloud services are subscribed.
8. No alarm push: On your phone, go to Settings > Notifications, find the ZUMIMALL app, and enable notification permissions. Within the ZUMIMALL app, go to 'Settings' and enable alarm push. In the 'My' interface, go to settings and turn on push sound. Ensure motion detection is enabled on the device. Restart your phone and clear app cache if necessary. Check network connectivity.
9. Unable to play local history playback: Check the Micro SD card status in 'Settings' to confirm recognition. Reinsert the card, format it within the app, or try a new Micro SD card.
10. Unable to play cloud playback: Ensure the cloud service function is enabled and the cloud storage button is active in the cloud service interface.
11. Device offline: Check device power and indicator lights ?. Verify Wi-Fi network is good and restart the router ?. If the camera is far from the router, consider moving the router closer or using a Wi-Fi extender. Delete the camera from your ZUMIMALL account, reset the device, and add it again. Ensure the device and app versions are the latest.
12. Short battery life: Reduce motion detection sensitivity and the number of camera triggers. Minimize two-way intercom usage and live stream viewing. Set alarm intervals and alarm time plans. Check for interfering objects within the field of view. Note that cold weather can reduce battery capacity.
13. ZUMIMALL App crashes: Re-download the latest version of the ZUMIMALL App. Ensure your phone's operating system version is compatible. Clear your phone's cache.
14. Unable to register an account: Ensure the ZUMIMALL App has access to mobile cellular data and wireless LAN. Enter an unregistered account with the correct format.
15. Unable to share device: Both users' accounts must be registered in the same country (e.g., UK users cannot share with US users).
16. No sound when talking: Ensure the speaker button ? is enabled on the app. Adjust intercom volume in settings. Turn on your phone's media volume. Release the intercom button ? to listen to the other party.
17. Noise during two-way intercom: Whistling may occur if the camera and phone are too close (1-2 meters), which is normal. Keep a certain distance during intercom.
18. Live video is blurry: Check the lens for dust and clean it. Try switching between different resolutions (HD/SD). Reset the camera and re-add it.
19. Night broadcast has white spots: White spots may appear when a light source shines directly onto the lens. Avoid pointing the lens at strong light sources.

For any other questions, please send your camera's SN number and a description of the problem to F5@zumimall.com. The SN number can be found in Settings ⚙️ > Device Information.

Finding SN Number: Navigate to Settings ⚙️ > Device Information. This screen displays Device Name, Network Name ?, Signal Strength, Virtual ID, IP Address, Mac Address, Timezone, Device Platform, and Device Version.