Manuals+

STMicroelectronics Material Declaration Form

Document ID: IPC 1752

Active Date: 7/9/2025

General Information

Form Type: Distribute

Sectionals:

Material Information:

Manufacturing Information:

Version: A

Subsectionals: A-D

Supplier Information

Company Name: STMicroelectronics

Contact Name: Refer to Supplier Comment section

Contact Phone: Refer to Supplier Comment section

Authorized Representative: MDG CHAMPION

Representative Phone: Refer to Supplier Comment section

Contact Email: Refer to Supplier Comment section

Representative Title: MDGMaterial Declaration champion

Representative Email: Refer to Supplier Comment section

Supplier Comment:

Online Technical Support: http://www.st.com/web/en/support/support.html

Uncertainty Statement

While STMicroelectronics has endeavored to provide information which is accurate and up to date, this document and its contents are provided on a strict 'as is' and 'as available' basis. STMicroelectronics disclaims all warranties, express or implied related to this document and its contents, including but not limited to implied warranties of completeness, truth, accuracy, merchantability, fitness for a particular purpose and non-infringement. ST shall have no responsibility and assumes no liability for any cost, loss or damage of any kind which could arise, directly or indirectly, from the use or inability to use this document and/or its contents.

Legal Statement

Supplier Acceptance: true

Legal Declaration: Standard

Supplier certifies that it gathered the provided information and such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part(s), and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part(s), the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier's liability and the Company's remedies for issues that arise regarding information the Supplier provides in this form.

Product Details

Mfr Item Number: STM32L552RET6Q

Mfr Item Name: 625W*472XXXZ

Amount: 359

Version: A

Unit of Measure: mg

Manufacturing Site: 998Z

Unit Type: Each

Date: 2025-07-09

ST ECOPACK Grade: ECOPACK® 2

Manufacturing Information

J-STD-020 MSL Rating: 3

Bulk Solder Termination: Not Applicable

Package Designator: QFP

Classification Temperature: 260

Terminal Plating: Tin (Sn), matte, annealed

Package Size: 10x10

Package Details: 5W LQFP 64 10x10x1.4 10051434

Number of Reflow Cycles: 3

Terminal Base Alloy: Copper Alloy

Number of Instances: 64

Shape: Gull wing

Comment: 0

RoHS Compliance Query

Directive: RoHS Directive 2011/65/EU - 8 June 2011, Annex II amended by Delegated Directive 2015/863 - 31 March 2015

Option Description Response
1 Product(s) meets EU RoHS requirement without any exemptions true
2 Product(s) meets EU RoHS requirements except lead in solder and this usage may qualify under the lead in solder '7b' exemption (other selected exemptions may apply) false
3 Product(s) meets EU RoHS requirements by application of the selected exemption(s) false
4 Product(s) does not meet EU RoHS requirements and is not under exemptions false

REACH Compliance Query

Date: 21st January 2025

Query Category Level Name Category Level Threshold Amount in Product (mg) Application Response
1 - Product(s) does not contain REACH Substances Of Very High Concern above the limits per the definition within REACH #N/A 0 true

Material Composition Declaration

Note: Substance present with less 0.001mg will not be declared in this document.

Homogeneous Material Material Group Mass (mg) Unit of Measure Level Substance Category Substance CAS Exempt Concentration in Homogeneous Material (ppm) Concentration in Product (ppm)
Die or dies M-011 Other inorganic materials 15.887 mg supplier die Silicon (Si) 7440-21-3 911738 40306.25
metallization 0.064 mg supplier metallization Aluminium (Al) 7429-90-5 4032 178.25
metallization 0.598 mg supplier metallization Copper (Cu) 7440-50-8 37634 1663.73
metallization 0.192 mg supplier metallization Tantalum (Ta) 7440-25-7 12097 534.79
metallization 0.007 mg supplier metallization Titanium (Ti) 7440-32-6 448 19.81
metallization 0.007 mg supplier metallization Tungsten (W) 7440-33-7 448 19.81
Passivation 0.149 mg supplier Passivation Silicon Nitride 12033-89-5 9409 415.95
Passivation 0.384 mg supplier Passivation Silicon Oxide 7631-86-9 24194 1069.57
Glue epoxy (EN4900GC) Other Organic Materials 0.912 mg supplier Organic Compounds Acrylic resin Proprietary 70000 177.70
0.064 mg supplier Organic Compounds Polybutadiene derivative Proprietary 20000 50.77
0.014 mg supplier Organic Compounds Butadiene copolymer Proprietary 15000 38.08
0.049 mg supplier Organic Compounds Acrylate Proprietary 54000 137.08
0.027 mg supplier Organic Compounds Epoxy resin Proprietary 30000 76.16
0.007 mg supplier Organic Compounds Peroxide Proprietary 8000 20.31
0.016 mg supplier Organic Compounds Additive Proprietary 18000 45.69
0.716 mg supplier Metals Silver 7440-22-4 785000 1992.81
Encapsualtion (EME-G700LAL-A) Other Organic Materials 236.000 mg supplier Organic Compounds Epoxy Resin Proprietary 55000 36118.81
4.956 mg supplier Organic Compounds Phenol Resin Proprietary 21000 13790.82
188.800 mg supplier Glass Silica(Amorphous)A 60676-86-0 800000 525364.48
28.084 mg supplier Glass Silica(Amorphous)B 7631-86-9 119000 78147.97
1.180 mg supplier Organic Compounds Carbon Black 1333-86-4 5000 3283.53
Bonding wire (Cu) Bonding Wire 0.833 mg supplier Metals Copper 7440-50-8 965500 2236.64
0.026 mg supplier Metals Palladium 7440-05-3 31000 71.81
0.003 mg supplier Metals Gold 7440-57-5 3500 8.11
Plating anode (Sn) Other inorganic materials 1.438 mg supplier Metals Tin 7440-31-5 1000000 4001.05
Leadframe (C7025 + Ag) Copper & its alloys 104.300 mg supplier Metals Copper 7440-50-8 973499 282538.63
2.377 mg supplier Metals Iron 7439-89-6 22790 6614.34
0.026 mg supplier Metals Phosphor 7723-14-0 250 72.56
0.131 mg supplier Metals Zinc 7440-66-6 1260 365.69
0.229 mg supplier Metals Siliver 7440-22-4 2200 638.51
0.000 mg supplier Metals Lead 7439-92-1 1 0.29

PDF preview unavailable. Download the PDF instead.

v1 Microsoft Excel for Microsoft 365

Related Documents

Preview STMicroelectronics Material Declaration Form - STM32L562RET6P
STMicroelectronics Material Declaration Form for the STM32L562RET6P microcontroller. Provides detailed information on material composition, RoHS and REACH compliance status, and manufacturing specifications.
Preview STMicroelectronics STM32L072CZT7 Material Declaration - RoHS & REACH Compliance
Detailed material declaration for the STMicroelectronics STM32L072CZT7 microcontroller, including RoHS and REACH compliance status and full material composition breakdown.
Preview STMicroelectronics Material Declaration Form for STM32MP235FAK3
Material declaration form from STMicroelectronics detailing the composition, RoHS compliance, and REACH status for the STM32MP235FAK3 component, including detailed substance breakdown.
Preview STMicroelectronics STM32L073CBT6 Material Declaration
Material declaration form for the STMicroelectronics STM32L073CBT6 component, detailing substance compliance with RoHS and REACH regulations, and material composition.
Preview STMicroelectronics STM32L562RET6 Material Declaration Form
Detailed material declaration for the STMicroelectronics STM32L562RET6 component, providing comprehensive information on its composition, compliance with RoHS and REACH directives, and manufacturing details, adhering to IPC-1752 standards.
Preview STMicroelectronics Material Declaration Form for STM32MP255FAK3
This document provides a detailed material declaration for the STMicroelectronics STM32MP255FAK3 component, following the IPC-1752 standard. It includes information on RoHS and REACH compliance, manufacturing details, and a comprehensive breakdown of the material composition.
Preview STMicroelectronics STM32G431RBI3 Material Declaration (IPC-1752)
Detailed material declaration for the STMicroelectronics STM32G431RBI3 microcontroller, including compliance information for RoHS and REACH, and a breakdown of constituent materials according to IPC-1752 standards.
Preview STMicroelectronics STM32L071CBT3 Material Declaration - RoHS & REACH Compliance
Official material declaration for the STMicroelectronics STM32L071CBT3 component, detailing substance composition, RoHS compliance, and REACH status. Includes material breakdown by homogeneous material.