TEGERA® 90069 Protective Gloves

Brand: Ejendals

Product Description

Synthetic glove with latex foam palm, structured, 13 gg, nylon. Category I. Color: black, yellow. Features a breathable back and water-repellent palm, suitable for all-round work.

Outer Material Specification: Natural latex

Inner Material Specification: Nylon

Size Range (EU): 6, 7, 8, 9

Package: 6 Pairs

Standards and Compliance

Certified according to PPE Regulation (EU) 2016/425.

Complies with EN 420:2003 + A1:2009 (Protective Gloves - General Requirements and Test Methods) and EN ISO 21420.

Declaration of Conformity available at: www.ejendals.com/conformity

For Eurasian Economic Community Customs Union Members: Product complies with TR TS 019/2011 "On the Safety of Personal Protective Equipment".

Pictogram Explanation

0 = Below the minimum performance level for the given individual hazard

X = Not submitted to the test or test method not suitable for the glove design or material

Safety Warning

Warning! For minimal risks only. This product is designed to provide protection for minimal risks only. Do not use these gloves near moving elements or machinery with unprotected parts due to the risk of entanglement.

Fitting and Sizing

All sizes comply with EN 420:2003+A1:2009 for comfort, fit, and dexterity, unless otherwise specified on the front page.

If the short model symbol is shown on the front page, the glove is shorter than a standard glove to enhance comfort for special purposes, such as fine assembly work.

Only wear products in a suitable size. Products that are either too loose or too tight will restrict movement and will not provide the optimal level of protection.

Finger dexterity test: Min. 1; Max. 5

Storage and Transport

Ideally stored in dry and dark conditions in the original package, between +10°C - +30°C.

Inspection Before Use

Check that the glove does not present holes, cracks, tears, colour change etc. If the product becomes damaged, it will NOT provide the optimal protection and must be disposed of. Never use a damaged product.

Shelf Life

The nature of the materials used in this product means that its life cannot be determined as it will be affected by many factors, such as storage conditions and usage.

Care and Maintenance

The user bears sole responsibility for submitting the product to mechanical washing after use, as unknown substances can contaminate the product during use and may affect performance levels.

To care for your product, rinse in cold water and line dry at room temperature.

Disposal

According to local environmental legislations.

Allergens

The glove contains natural rubber which may cause allergy.

This product may contain components that may be a potential risk for allergic reactions. Do not use in case of hypersensitivity signs. For more information, contact Ejendals.

Latex free: No

	Tegera 612 Safety Gloves: EN Standards, Heat & Mechanical Protection \| Ejendals Detailed instructions and specifications for Ejendals Tegera 612 safety gloves. Covers EN ISO 21420, EN 388, EN 407 standards, heat resistance up to 100°C, water repellency, and proper usage, care, and disposal.
	Ejendals teGera® 256 Protective Gloves: User Instructions and Safety Information Comprehensive user instructions and safety information for Ejendals teGera® 256 cut-resistant and thermal protective gloves, detailing performance standards, usage guidelines, care, and storage.
	TEGERA® 227 Protective Gloves - Heat and Mechanical Resistance \| Ejendals Comprehensive guide to Ejendals TEGERA® 227 protective gloves, detailing heat and mechanical resistance standards (EN 407, EN 388), general requirements (EN ISO 21420), material specifications, sizing, and usage instructions.
	TEGERA® 432 Cut Resistant Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 432 cut-resistant gloves by Ejendals, covering performance ratings, usage, care, and safety information.
	TEGERA 8833 Winter-Lined Synthetic Work Gloves - Cut & Heat Protection Detailed instructions and specifications for TEGERA 8833 synthetic work gloves. Features include cut resistance (Level A), contact heat protection (up to 250°C), windproof, waterproof, and food handling suitability. Compliant with EN ISO 21420, EN 388, EN 407, and EN 511 standards.
	TEGERA® 19 Protective Gloves: User Manual and Safety Information Detailed instructions and safety information for Ejendals TEGERA® 19 welding and heat-resistant protective gloves, covering standards, performance, usage, care, and disposal.
	TEGERA® 811 Synthetic PU Gloves: User Manual and Safety Information Detailed instructions, safety standards, performance ratings (EN 388, ESD), and handling guidelines for TEGERA® 811 synthetic PU gloves by Ejendals. Suitable for precision work.
	TEGERA® 8815 Cut Resistant Protective Gloves \| Ejendals Detailed instructions and specifications for TEGERA® 8815 protective gloves. Features include cut resistance level F, contact heat resistance up to 100°C, food handling approval, and HPPE lining. Learn about standards EN 388, EN 407, and EN 420.