Tayogo Ear-Clip Wireless Headphone

Package includes:

1. One pair of S6 TWS earphones (one for the left ear and one for the right ear).
2. One charging box.
3. One charging cable.
4. One instruction manual.

Product Parts:

1. Left earphone
2. Right earphone
3. Earphone charging Pins
4. MFB (Multi-Function Button) function button
5. LED Indicator
6. Speaker
7. Power Display
8. Charging box pins
9. TYPE-C port

Diagram Description:

A white charging case for Tayogo S6 Ear-Clip Wireless Headphones is shown open. The case features a digital display showing '84' and indicators for left (L) and right (R) earphones. Two white earphones are seated inside the charging case.

The charging case, when open, reveals the two earphones. Callouts point to: 1. Left earphone, 7. Power Display on the case, 8. Charging pins for the earphones. The closed charging case shows: 9. TYPE-C port for charging the case. A single earphone illustration highlights: 3. Earphone charging pins, 4. MFB (Multi-Function Button) function button, 5. LED Indicator light, 6. Speaker.

Specifications:

Bluetooth version: Bluetooth V5.3

Supported profiles: a2dp, avctp, avdtp, avrcp, hfp, spp, smp, att, gap, gatt, rfcomm, sdp, l2cap.

Sensitivity: -90dBm

Signal distance: up to 10 meters (in open distance)

Battery specifications:

• Earphones - 3.7V/35MAH
• Charging case - 5.0V/300MAH

Playing time: up to 7 hours

Talk time: up to 7 hours

Standby time: up to 80 hours

Charging time:

• Charging the case: around 1.5 hours
• Charging the earphones: around 1 hour

The charging case can charge the earphones around 3 times.

Pairing:

1. Take the earphones out of the charging case; they will automatically power on.
2. Go to the Bluetooth settings on your phone and search for new Bluetooth devices named "S6".
3. Once found, select "S6" to connect and pair the earphones.

Wearing:

1. Take the earphones out of the charging case.
2. Insert the speaker part (the one with the speaker holes) into your ear canal.
3. Ensure that the function key part (the control area) faces outward and the earphone sits securely in your ear.

Note: If you feel the earphone is too tight or uncomfortable, you can slightly adjust the earphone until it fits comfortably.

Operation:

1. Power On:

   The earphones will automatically power on when taken out of the charging case. To power on the earphones separately, press and hold the MFB button for 3 seconds.

2. Power Off:

   To power off the earphones, make sure they are disconnected from any Bluetooth device. Press and hold the MFB button for 8 seconds. Alternatively, placing the earphones back into the charging case will automatically power them off.

3. Reconnection:

   When you remove the earphones from the charging case, they will automatically power on and reconnect to the last paired Bluetooth-enabled phone.

4. Pause / Play:

   While music is playing, double-click the MFB button to pause or play the music.

5. Song Switching:

   During music playback, long-press the MFB button on the right earphone to switch to the next song, and long-press the MFB button on the left earphone to switch to the previous song.

6. Volume Adjustment:

   Triple-click the MFB button on the right earphone to decrease the volume, and triple-click the MFB button on the left earphone to increase the volume.

7. Voice Assistant:

   While music is paused, triple-click the MFB button to activate the voice assistant, and double-click to exit the voice assistant.

8. Call Answering / Rejecting / Hanging Up:

   When there is an incoming call, double-click the MFB button to answer the call and press and hold the MFB button for 3 seconds to reject the call. During a call, double-click the MFB button to hang up the call.

9. Low Battery Warning:

   When the Bluetooth earphones have low battery, a voice prompt will notify you of "Low Battery," and the earphones will automatically power off when the battery is critically low.

Charging:

Place the earphones into the charging case, and they will automatically start charging. The red indicator light will stay on, and the marquee indicator lights on both sides of the display will circulate. Once the earphones are fully charged, the blue indicator light will turn on, and then both the blue indicator light and marquee lights will turn off.

To charge the charging case, connect one end of the Type-C data cable to a 5V 1A power adapter and the other end to the charging case. The current battery level of the charging case will be displayed in the middle of the screen.

Notes:

• Please charge the earphones in a safe environment.
• When the charging case displays "full battery," disconnect the charging case from the charging cable to avoid damaging the charging case due to prolonged charging.
• Adjust the music volume to a suitable level while playing music to avoid potential hearing damage from prolonged exposure to high volumes.
• Try to avoid using the earphones in places with sources of interference, as it may affect the earphones' signal reception.
• Avoid using the earphones in corrosive environments, as it may affect the functionality of the earphones.